|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Tularosa Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Tularosa Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Tularosa Cemetery. We've listed the following communities based on their distance, with the closest first.
- Ellisville
(Less than 2 miles to the north)
- Antioch
(8 miles [12.9 km] to the northeast)
- Jump to our Gazetteer entry for Antioch
- Antioch is located in Jones County
- Laurel
(8 miles [12.9 km] to the northeast)
- Service
(10 miles [16.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Service. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Service
- Service is located in Jones County
- Ovett
(11 miles [17.7 km] to the southeast)
- Jump to our Gazetteer entry for Ovett
- Ovett is located in Jones County
- Soso
(12 miles [19.3 km] to the north)
- Jump to our Gazetteer entry for Soso
- Soso is located in Jones County
- Population from the 2020 Census: 396 people
- Amy
(14 miles [22.5 km] to the north)
- Jump to our Gazetteer entry for Amy
- Amy is located in Jones County
- Errata
(14 miles [22.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Errata. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Errata
- Errata is located in Jones County
- Lux
(15 miles [24.1 km] to the southwest)
- Jump to our Gazetteer entry for Lux
- Lux is located in Covington County
- Petal
(16 miles [25.7 km] to the south)
- Moss
(16 miles [25.7 km] to the north)
- Jump to our Gazetteer entry for Moss
- Moss is located in Jasper County
- Moss has also been known as:
- Mossville
- Goodluck
(17 miles [27.4 km] to the south)
- Jump to our Gazetteer entry for Goodluck
- Goodluck is located in Forrest County
- Sandersville
(17 miles [27.4 km] to the northeast)
- Jump to our Gazetteer entry for Sandersville
- Sandersville is located in Jones County
- Population from the 2020 Census: 721 people
- Seminary
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Seminary have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Seminary
- Seminary is located in Covington County
- Population from the 2020 Census: 284 people
- Jump to TripAdvisor's Tourism page for Seminary <2>
- Hattiesburg
(18 miles [29 km] to the south)
- Hot Coffee
(18 miles [29 km] to the northwest)
- Jump to our Gazetteer entry for Hot Coffee
- Hot Coffee is located in Covington County
- Kola
(19 miles [30.6 km] to the west)
- Jump to our Gazetteer entry for Kola
- Kola is located in Covington County
- Stringer
(20 miles [32.2 km] to the north)
- West Hattiesburg
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for West Hattiesburg have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Hattiesburg
- West Hattiesburg is located in Lamar County
- Mulberry
(21 miles [33.8 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Mulberry. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Mulberry
- Mulberry is located in Wayne County
- Richton
(22 miles [35.4 km] to the southeast)
- Vernon ‑ Historic
(22 miles [35.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Vernon. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Vernon
- Vernon is located in Jasper County
- Taylorsville
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Taylorsville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Taylorsville
- Taylorsville is located in Smith County
- Population from the 2020 Census: 1,241 people
- Jump to TripAdvisor's Tourism page for Taylorsville <2>
- Collins
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Collins have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Collins
- Collins is located in Covington County
- Population from the 2020 Census: 2,417 people
- Jump to TripAdvisor's Tourism page for Collins <2>
- Sumrall
(23 miles [37 km] to the southwest)
Off-the-Road Links ...
The official website for State of Mississippi: https://www.ms.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Tularosa Cemetery. The point we use is located at these GPS coordinates - Latitude: 31.5799, Longitude: -89.1973 In this case, the coordinates for the Tularosa Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|