|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Decedar Baptist Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Decedar Baptist Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Decedar Baptist Cemetery. We've listed the following communities based on their distance, with the closest first.
- Success ‑ Historic
(Less than 2 miles to the east)
- Note: We haven't been able to verify our GPS coordinates for Success. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Success
- Success is located in Jasper County
- Six Towns ‑ Historic
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Six Towns have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Six Towns
- Six Towns is located in Newton County
- Montrose
(6 miles [9.7 km] to the southeast)
- Jump to our Gazetteer entry for Montrose
- Montrose is located in Jasper County
- Population from the 2020 Census: 137 people
- Baxter ‑ Historic
(7 miles [11.3 km] to the east)
- Jump to our Gazetteer entry for Baxter
- Baxter is located in Jasper County
- Verba ‑ Historic
(8 miles [12.9 km] to the southeast)
- Jump to our Gazetteer entry for Verba
- Verba is located in Jasper County
- Lake
(9 miles [14.5 km] to the north)
- Louin
(9 miles [14.5 km] to the south)
- Jump to our Gazetteer entry for Louin
- Louin is located in Jasper County
- Population from the 2020 Census: 262 people
- Garlandsville
(9 miles [14.5 km] to the east)
- Jump to our Gazetteer entry for Garlandsville
- Garlandsville is located in Jasper County
- Newton
(11 miles [17.7 km] to the northeast)
- Hamlet ‑ Historic
(12 miles [19.3 km] to the south)
- Jump to our Gazetteer entry for Hamlet
- Hamlet is located in Jasper County
- Stevens ‑ Historic
(12 miles [19.3 km] to the south)
- Jump to our Gazetteer entry for Stevens
- Stevens is located in Jasper County
- Turnerville
(13 miles [20.9 km] to the southeast)
- Jump to our Gazetteer entry for Turnerville
- Turnerville is located in Jasper County
- McNeal ‑ Historic
(13 miles [20.9 km] to the southeast)
- Jump to our Gazetteer entry for McNeal
- McNeal is located in Jasper County
- Pine Bluff
(13 miles [20.9 km] to the northeast)
- Jump to our Gazetteer entry for Pine Bluff
- Pine Bluff is located in Newton County
- Sylvarena
(14 miles [22.5 km] to the south)
- Jump to our Gazetteer entry for Sylvarena
- Sylvarena is located in Smith County
- Population from the 2020 Census: 106 people
- Ras
(14 miles [22.5 km] to the southeast)
- Jump to our Gazetteer entry for Ras
- Ras is located in Jasper County
- Gridley ‑ Historic
(14 miles [22.5 km] to the southeast)
- Jump to our Gazetteer entry for Gridley
- Gridley is located in Jasper County
- Penantly
(14 miles [22.5 km] to the east)
- Jump to our Gazetteer entry for Penantly
- Penantly is located in Jasper County
- Burns
(15 miles [24.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Burns. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Burns
- Burns is located in Smith County
- Bay Springs
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Bay Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bay Springs
- Bay Springs is located in Jasper County
- Population from the 2020 Census: 1,650 people
- Jump to TripAdvisor's Tourism page for Bay Springs <4>
- Fouke ‑ Historic
(15 miles [24.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Fouke. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Fouke
- Fouke is located in Jasper County
- Forest
(15 miles [24.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Forest. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Forest
- Forest is located in Scott County
- Population from the 2020 Census: 5,483 people
- Jump to TripAdvisor's Tourism page for Forest <4>
- Conehatta
(16 miles [25.7 km] to the north)
- Jump to our Gazetteer entry for Conehatta
- Conehatta is located in Newton County
- Raleigh
(17 miles [27.4 km] to the southwest)
- Lake Como
(17 miles [27.4 km] to the south)
- Jump to our Gazetteer entry for Lake Como
- Lake Como is located in Jasper County
- Acme ‑ Historic
(17 miles [27.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Acme. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Acme
- Acme is located in Jasper County
- Rose Hill
(17 miles [27.4 km] to the east)
- Jump to our Gazetteer entry for Rose Hill
- Rose Hill is located in Jasper County
- Hickory
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Hickory have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hickory
- Hickory is located in Newton County
- Population from the 2020 Census: 515 people
Off-the-Road Links ...
The official website for State of Mississippi: https://www.ms.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Decedar Baptist Cemetery. The point we use is located at these GPS coordinates - Latitude: 32.2053, Longitude: -89.2927 In this case, the coordinates for the Decedar Baptist Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|