Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Tuscumbia had a population of 238 people in 1895 with a post office and no railroad service. In 2020, Tuscumbia had a population of 204 people.
The following communities are listed based on their distance from Tuscumbia, with the one closest to Tuscumbia listed first.
- Marys Home
(7 miles [11.3 km] to the northeast)
- Bagnell
(7 miles [11.3 km] to the west)
- Aurora Springs
(9 miles [14.5 km] to the northwest)
- Brumley
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Brumley have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brumley
- Brumley is located in Miller County
- Population from the 2020 Census: 96 people
- Jump to TripAdvisor's Tourism page for Brumley <3>
- Pleasant Mount
(10 miles [16.1 km] to the north)
- Saint Elizabeth
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Saint Elizabeth have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Elizabeth
- Saint Elizabeth is located in Miller County
- Population from the 2020 Census: 346 people
- Jump to TripAdvisor's Tourism page for Saint Elizabeth <3>
- Spring Garden
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Spring Garden have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Garden
- Spring Garden is located in Miller County
- Eldon
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Eldon have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eldon
- Eldon is located in Miller County
- Population from the 2020 Census: 4,746 people
- Jump to TripAdvisor's Tourism page for Eldon <3>
- Olean
(12 miles [19.3 km] to the north)
- Hickory Hill
(12 miles [19.3 km] to the northeast)
- Rocky Mount
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Rocky Mount have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rocky Mount
- Rocky Mount is located in Miller County
- Iberia
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Iberia have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Iberia
- Iberia is located in Miller County
- Population from the 2020 Census: 753 people
- Jump to TripAdvisor's Tourism page for Iberia <3>
- Teal ‑ Historic
(13 miles [20.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Teal. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Teal
- Teal is located in Cole County
- Google driving directions:
- From your current location to Teal
- From Tuscumbia to Teal
- Damsel
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Damsel have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Damsel
- Damsel is located in Camden County
- Bass
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Bass have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bass
- Bass is located in Cole County
- Decatur
(15 miles [24.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Decatur. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Decatur
- Decatur is located in Cole County
- Google driving directions:
- From your current location to Decatur
- From Tuscumbia to Decatur
- Barnett
(15 miles [24.1 km] to the northwest)
- Enon
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Enon have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Enon
- Enon is located in Moniteau County
- Toronto
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Toronto have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Toronto
- Toronto is located in Camden County
- Hawkeye
(16 miles [25.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Hawkeye. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Hawkeye
- Hawkeye is located in Pulaski County
- Google driving directions:
- From your current location to Hawkeye
- From Tuscumbia to Hawkeye
- Van Cleve
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Van Cleve have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Cleve
- Van Cleve is located in Maries County
- Saint Thomas
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Saint Thomas have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Thomas
- Saint Thomas is located in Cole County
- Population from the 2020 Census: 273 people
- Cape Galena ‑ Historic
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Cape Galena have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cape Galena
- Cape Galena is located in Morgan County
- High Point
(18 miles [29 km] to the northwest)
- Tavern
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Tavern have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tavern
- Tavern is located in Maries County
- Babbtown
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Babbtown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Babbtown
- Babbtown is located in Osage County
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Tuscumbia. If you can help, please contact us through our Feedback Page.
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Tuscumbia, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |