Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Osborn had a population of 373 people in 1895 with a post office and railroad service. In 2020, Osborn had a population of 408 people.
The following communities are listed based on their distance from Osborn, with the one closest to Osborn listed first.
- Keystone ‑ Historic
(4 miles [6.4 km] to the southeast) - Perrin
(6 miles [9.7 km] to the south) - Cameron
(6 miles [9.7 km] to the east)- Note: The GPS coordinates that we are using for Cameron have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cameron
- Cameron is located in Clinton County
- Population from the 2020 Census: 8,136 people
- Jump to TripAdvisor's Tourism page for Cameron <3>
- Stewartsville
(7 miles [11.3 km] to the west)- Note: The GPS coordinates that we are using for Stewartsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stewartsville
- Stewartsville is located in DeKalb County
- Population from the 2020 Census: 729 people
- Jump to TripAdvisor's Tourism page for Stewartsville <3>
- Amity
(9 miles [14.5 km] to the northwest)- Jump to our Gazetteer entry for Amity
- Amity is located in DeKalb County
- Population from the 2020 Census: 53 people
- Maysville
(9 miles [14.5 km] to the north)- Note: The GPS coordinates that we are using for Maysville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maysville
- Maysville is located in DeKalb County
- Population from the 2020 Census: 1,073 people
- Jump to TripAdvisor's Tourism page for Maysville <3>
- Mabel
(9 miles [14.5 km] to the northeast)- Jump to our Gazetteer entry for Mabel
- Mabel is located in Daviess County
- Starfield
(11 miles [17.7 km] to the southwest) - Clarksdale
(11 miles [17.7 km] to the northwest)- Note: The GPS coordinates that we are using for Clarksdale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarksdale
- Clarksdale is located in DeKalb County
- Population from the 2020 Census: 254 people
- Hemple
(11 miles [17.7 km] to the west) - Kerr
(12 miles [19.3 km] to the east) - Weatherby
(12 miles [19.3 km] to the northeast) - Bayfield ‑ Historic
(12 miles [19.3 km] to the west) - Plattsburg
(13 miles [20.9 km] to the southwest)- Note: The GPS coordinates that we are using for Plattsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plattsburg
- Plattsburg is located in Clinton County
- Population from the 2020 Census: 2,242 people
- Jump to TripAdvisor's Tourism page for Plattsburg <3>
- Lathrop
(13 miles [20.9 km] to the south)- Note: The GPS coordinates that we are using for Lathrop have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lathrop
- Lathrop is located in Clinton County
- Population from the 2020 Census: 2,019 people
- Jump to TripAdvisor's Tourism page for Lathrop <3>
- Kidder
(13 miles [20.9 km] to the east)- Jump to our Gazetteer entry for Kidder
- Kidder is located in Caldwell County
- Population from the 2020 Census: 319 people
- Jump to TripAdvisor's Tourism page for Kidder <3>
- Alta Vista ‑ Historic
(13 miles [20.9 km] to the northeast)- Note: The GPS coordinates that we are using for Alta Vista have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alta Vista
- Alta Vista is located in Daviess County
- Scearces
(14 miles [22.5 km] to the southwest) - Mirabile
(14 miles [22.5 km] to the southeast) - Winston
(14 miles [22.5 km] to the northeast) - Boxford ‑ Historic
(14 miles [22.5 km] to the northwest) - Gower
(15 miles [24.1 km] to the southwest)- Jump to our Gazetteer entry for Gower
- Gower is located in Clinton County
- Population from the 2020 Census: 1,453 people
- Jump to TripAdvisor's Tourism page for Gower <3>
- Easton
(15 miles [24.1 km] to the west)- Jump to our Gazetteer entry for Easton
- Easton is located in Buchanan County
- Population from the 2020 Census: 233 people
- Orchid
(16 miles [25.7 km] to the northwest) - Fairport
(16 miles [25.7 km] to the north) - Stockbridge ‑ Historic
(16 miles [25.7 km] to the west)- Note: The GPS coordinates that we are using for Stockbridge have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stockbridge
- Stockbridge is located in Buchanan County
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Osborn. If you can help, please contact us through our Feedback Page.
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Osborn, please let us know so that we can improve our accuracy. |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |