RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Missouri >> Dallas County >> Miller Ford >> Tidbits & TriviaIndex...










Learn About
The Commemorative
Quarter for
Missouri


The Commemorative Quarter for Missouri







Outdoor Activities ...

As we travel, we like to pursue some of our interests (such as astronomy and bird watching).

When in Miller Ford, we use the following websites to find information relevant to Miller Ford and the surrounding area.

  • Weather ...
  • Astronomy & Satellites ...
    • Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
    • To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Miller Ford:
    • 37.877258, -92.888241
    • Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
    • The Heavens-Above Website, centered on Miller Ford
  • Waymarking ...
    • Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
    • Waymark.com

Curious and Interesting Names Near Miller Ford ...

As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.

  • Celt
    (Less than 2 miles to the west)
    • Note: The GPS coordinates that we are using for Celt have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Celt
    • Celt is located in Dallas County
  • Corkery
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Corkery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Corkery
    • Corkery is located in Dallas County
  • Green Gables ‑ Historic
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for Green Gables have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Green Gables
    • Green Gables is located in Camden County
  • Ira
    (2 miles [3.2 km] to the east)
    • Note: The GPS coordinates that we are using for Ira have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ira
    • Ira is located in Laclede County
  • Leadmine
    (4 miles [6.4 km] to the southwest)
    • Jump to our Gazetteer entry for Leadmine
    • Leadmine is located in Dallas County
  • Only
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Only have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Only
    • Only is located in Camden County
  • Pleasant Grove
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for Pleasant Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pleasant Grove
    • Pleasant Grove is located in Camden County
  • Ralphwhite Ford ‑ Historic
    (3 miles [4.8 km] to the south)
    • Note: The GPS coordinates that we are using for Ralphwhite Ford have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ralphwhite Ford
    • Ralphwhite Ford is located in Dallas County
  • Sweet Hollow Ford ‑ Historic
    (3 miles [4.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Sweet Hollow Ford have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sweet Hollow Ford
    • Sweet Hollow Ford is located in Laclede County
  • Tom Hollow Ford ‑ Historic
    (2 miles [3.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Tom Hollow Ford have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Tom Hollow Ford
    • Tom Hollow Ford is located in Laclede County

How Far From Miller Ford to ...

We spend a lot of time looking through Gazetteers & Almanacs that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Miller Ford to various places of note, such as the White House.

With a nod to our favorite Gazetteers and using the location of where the historic<2> community of Miller Ford once stood, the straight-line distance<3> beginning in Miller Ford and extending to:

  • Buffalo, which is the Seat of Dallas County, lies 19 miles [30.6 km]<3> to the southwest. If you could walk a straight line from Miller Ford to Buffalo, with an average speed<4> of 2.2 miles [3.5 km] per hour, it would take just over a day to make the trip. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take 6 hours.
  • The White House (Washington, DC) is 859 miles [1,382.4 km] to the east (E). Driving, with an average speed of 63 miles [101.4 km] per hour, would take most of two days, a buggy would take 34 days and walking would take 49 days.
  • The shortest distance<5> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 6,574 miles [10,579.8 km] and it lies to the northeast (NE).<6>
  • The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 7,313 miles [11,769.1 km] and it lies to the northeast (NE).<7>
  • The distance to Saint Peter's Basilica (The Vatican) is 5,195 miles [8,360.5 km] and it lies to the northeast (NE).<8>

The official website for State of Missouri: https://www.mo.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Miller Ford, please let us know so that we can improve our accuracy.
<3>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Miller Ford) to Point B.Our distance measurements begin at a specific point in Miller Ford. The point we use is located at these GPS coordinates - Latitude: 37.8773, Longitude: -92.8882       In this case, the coordinates for Miller Ford have been provided by the Geographic Names Information System (GNIS).
<4>While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day.
<5>The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Miller Ford to the Middle East to be East and South, the Great Circle Route actually lies to the North and East.
<6>The calculated bearing (or angle) to Jerusalem is 317.814 degrees.
<7>The calculated bearing (or angle) to Mecca is 314.664 degrees.
<8>The calculated bearing (or angle) to the Vatican is 312.079 degrees.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024