|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Merna in the Atlas, the following communities of the 1890's would have been found near the current location of Merna. The following communities are listed based on their distance, with the one closest to Merna listed first.
- Overton
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Overton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Overton
- Overton is located in Cooper County
- Rocheport
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Rocheport have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rocheport
- Rocheport is located in Boone County
- Population from the 2020 Census: 259 people
- Jump to TripAdvisor's Tourism page for Rocheport <3>
- Clarks Fork
(5 miles [8 km] to the south)
- Jump to our Gazetteer entry for Clarks Fork
- Clarks Fork is located in Cooper County
- Boonville
(5 miles [8 km] to the west)
- Franklin
(6 miles [9.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Franklin. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Franklin
- Franklin is located in Howard County
- Population from the 2020 Census: 93 people
- Jump to TripAdvisor's Tourism page for Franklin <3>
- Estill
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Estill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Estill
- Estill is located in Howard County
- Billingsville
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Billingsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Billingsville
- Billingsville is located in Cooper County
- Midway
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Midway have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Midway
- Midway is located in Boone County
- Woodlandville
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Woodlandville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodlandville
- Woodlandville is located in Boone County
- Speed
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Speed have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Speed
- Speed is located in Cooper County
- Lone Elm
(11 miles [17.7 km] to the southwest)
- Jump to our Gazetteer entry for Lone Elm
- Lone Elm is located in Cooper County
- Prairie Home
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Prairie Home have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Prairie Home
- Prairie Home is located in Cooper County
- Population from the 2020 Census: 280 people
- Sebree
(12 miles [19.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Sebree. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Sebree
- Sebree is located in Howard County
- Boonesboro
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Boonesboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boonesboro
- Boonesboro is located in Howard County
- Jump to TripAdvisor's Tourism page for Boonesboro <3>
- Lamine
(12 miles [19.3 km] to the west)
- Jump to our Gazetteer entry for Lamine
- Lamine is located in Cooper County
- Fayette
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Fayette have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fayette
- Fayette is located in Howard County
- Population from the 2020 Census: 2,682 people
- Jump to TripAdvisor's Tourism page for Fayette <3>
- Pisgah
(13 miles [20.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Pisgah. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Pisgah
- Pisgah is located in Cooper County
- Lupus
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Lupus have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lupus
- Lupus is located in Moniteau County
- Population from the 2020 Census: 34 people
- Bellair
(14 miles [22.5 km] to the southwest)
- Jump to our Gazetteer entry for Bellair
- Bellair is located in Cooper County
- Petersburg ‑ Historic
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Petersburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Petersburg
- Petersburg is located in Cooper County
- Bunceton
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Bunceton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bunceton
- Bunceton is located in Cooper County
- Population from the 2020 Census: 358 people
- Jump to TripAdvisor's Tourism page for Bunceton <3>
- Pilot Grove
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Pilot Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pilot Grove
- Pilot Grove is located in Cooper County
- Population from the 2020 Census: 761 people
- Jump to TripAdvisor's Tourism page for Pilot Grove <3>
- Harrisburg
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Harrisburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harrisburg
- Harrisburg is located in Boone County
- Population from the 2020 Census: 298 people
- Jump to TripAdvisor's Tourism page for Harrisburg <3>
- Jamestown
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Jamestown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jamestown
- Jamestown is located in Moniteau County
- Population from the 2020 Census: 397 people
- Jump to TripAdvisor's Tourism page for Jamestown <3>
- Providence
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Providence have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Providence
- Providence is located in Boone County
- Columbia
(16 miles [25.7 km] to the east)
- Perche ‑ Historic
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Perche have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Perche
- Perche is located in Boone County
- Burton
(16 miles [25.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Burton. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Burton
- Burton is located in Howard County
- Lisbon
(16 miles [25.7 km] to the northwest)
- Jump to our Gazetteer entry for Lisbon
- Lisbon is located in Howard County
Off-the-Road Links ...
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Merna, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|