Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Iconium (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Iconium. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Iconium is located in Saint Clair County.
To see how the shape of Missouri's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Saint Clair County: Bates, Benton, Cedar, Henry, Hickory, Polk & Vernon.
Below are the counties that are near Iconium. For each of these counties, we show a sample of those communities that are closest to Iconium:
- Saint Clair County (The home county of Iconium)
- The following are listed by their distance from Iconium, with the one closest to Iconium listed first.
- Osceola
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Osceola have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Osceola
- Osceola is located in Saint Clair County
- Population from the 2020 Census: 935 people
- Jump to TripAdvisor's Tourism page for Osceola <2>
- Gerster
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Gerster have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gerster
- Gerster is located in Saint Clair County
- Population from the 2020 Census: 24 people
- Vista
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Vista have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vista
- Vista is located in Saint Clair County
- Population from the 2020 Census: 47 people
- Lowry City
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Lowry City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lowry City
- Lowry City is located in Saint Clair County
- Population from the 2020 Census: 630 people
- Jump to TripAdvisor's Tourism page for Lowry City <2>
- Collins
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Collins have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Collins
- Collins is located in Saint Clair County
- Population from the 2020 Census: 159 people
- Jump to TripAdvisor's Tourism page for Collins <2>
- Monegaw Springs
(16 miles [25.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Monegaw Springs. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Monegaw Springs
- Monegaw Springs is located in Saint Clair County
- Roscoe
(17 miles [27.4 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Roscoe. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Roscoe
- Roscoe is located in Saint Clair County
- Population from the 2020 Census: 121 people
- Jump to TripAdvisor's Tourism page for Roscoe <2>
- Cobb
(18 miles [29 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Cobb. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Cobb
- Cobb is located in Saint Clair County
- Johnson City
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Johnson City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Johnson City
- Johnson City is located in Saint Clair County
- Appleton City
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Appleton City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Appleton City
- Appleton City is located in Saint Clair County
- Population from the 2020 Census: 1,113 people
- Jump to TripAdvisor's Tourism page for Appleton City <2>
- Bates County
- Rockville
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Rockville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockville
- Rockville is located in Bates County
- Population from the 2020 Census: 159 people
- Benton County
- The following are listed by their distance from Iconium, with the one closest to Iconium listed first.
- Tackner
(10 miles [16.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Tackner. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Tackner
- Tackner is located in Benton County
- Racket
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Racket have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Racket
- Racket is located in Benton County
- Warsaw
(13 miles [20.9 km] to the northeast)
- Palo Pinto
(19 miles [30.6 km] to the north)
- Jump to our Gazetteer entry for Palo Pinto
- Palo Pinto is located in Benton County
- Edwards
(20 miles [32.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Edwards. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Edwards
- Edwards is located in Benton County
- Jump to TripAdvisor's Tourism page for Edwards <2>
- Edmonson
(22 miles [35.4 km] to the northeast)
- Jump to our Gazetteer entry for Edmonson
- Edmonson is located in Benton County
- Lincoln
(23 miles [37 km] to the northeast)
- Ionia
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Ionia have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ionia
- Ionia is located in Benton County
- Population from the 2020 Census: 88 people
- Cole Camp
(30 miles [48.3 km] to the northeast)
- Camden County
- Climax Springs
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Climax Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Climax Springs
- Climax Springs is located in Camden County
- Estimated population in 2015: 120 people
- Jump to TripAdvisor's Tourism page for Climax Springs <2>
- Cedar County
- The following are listed by their distance from Iconium, with the one closest to Iconium listed first.
- Caplinger Mills
(25 miles [40.2 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Caplinger Mills. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Caplinger Mills
- Caplinger Mills is located in Cedar County
- Lebeck
(25 miles [40.2 km] to the southwest)
- Jump to our Gazetteer entry for Lebeck
- Lebeck is located in Cedar County
- El Dorado Springs
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for El Dorado Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for El Dorado Springs
- El Dorado Springs is located in Cedar County
- Population from the 2020 Census: 3,601 people
- Jump to TripAdvisor's Tourism page for El Dorado Springs <2>
- Willowville
(30 miles [48.3 km] to the southwest)
- Jump to our Gazetteer entry for Willowville
- Willowville is located in Cedar County
- Dallas County
- Urbana
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Urbana have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Urbana
- Urbana is located in Dallas County
- Population from the 2020 Census: 423 people
- Jump to TripAdvisor's Tourism page for Urbana <2>
- Henry County
- The following are listed by their distance from Iconium, with the one closest to Iconium listed first.
- Brownington
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Brownington have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brownington
- Brownington is located in Henry County
- Population from the 2020 Census: 107 people
- Tightwad
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Tightwad have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tightwad
- Tightwad is located in Henry County
- Population from the 2020 Census: 61 people
- Deepwater
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Deepwater have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Deepwater
- Deepwater is located in Henry County
- Population from the 2020 Census: 418 people
- Jump to TripAdvisor's Tourism page for Deepwater <2>
- Alberta
(19 miles [30.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Alberta. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Alberta
- Alberta is located in Henry County
- Clinton
(21 miles [33.8 km] to the northwest)
- Yolo
(22 miles [35.4 km] to the north)
- Jump to our Gazetteer entry for Yolo
- Yolo is located in Henry County
- La Due
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for La Due have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for La Due
- La Due is located in Henry County
- Population from the 2010 Census: 28 people
- Calhoun
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Calhoun have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calhoun
- Calhoun is located in Henry County
- Population from the 2020 Census: 456 people
- Montrose
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Montrose have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Montrose
- Montrose is located in Henry County
- Population from the 2020 Census: 380 people
- Jump to TripAdvisor's Tourism page for Montrose <2>
- Windsor
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Windsor have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Windsor
- Windsor is located in Henry County
- Population from the 2020 Census: 2,813 people
- Jump to TripAdvisor's Tourism page for Windsor <2>
- Hickory County
- The following are listed by their distance from Iconium, with the one closest to Iconium listed first.
- Quincy
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Quincy have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Quincy
- Quincy is located in Hickory County
- Avery
(10 miles [16.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Avery. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Avery
- Avery is located in Hickory County
- Wheatland
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Wheatland have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wheatland
- Wheatland is located in Hickory County
- Population from the 2020 Census: 373 people
- Jump to TripAdvisor's Tourism page for Wheatland <2>
- Weaubleau
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Weaubleau have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Weaubleau
- Weaubleau is located in Hickory County
- Population from the 2020 Census: 410 people
- Jump to TripAdvisor's Tourism page for Weaubleau <2>
- Hermitage
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Hermitage have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hermitage
- Hermitage is located in Hickory County
- Population from the 2020 Census: 461 people
- Jump to TripAdvisor's Tourism page for Hermitage <2>
- Galmey
(17 miles [27.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Galmey. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Galmey
- Galmey is located in Hickory County
- Cross Timbers
(18 miles [29 km] to the east)
- Jump to our Gazetteer entry for Cross Timbers
- Cross Timbers is located in Hickory County
- Population from the 2020 Census: 213 people
- Elkton
(18 miles [29 km] to the south)
- Jump to our Gazetteer entry for Elkton
- Elkton is located in Hickory County
- Preston
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Preston have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Preston
- Preston is located in Hickory County
- Population from the 2020 Census: 220 people
- Jump to TripAdvisor's Tourism page for Preston <2>
- Nemo
(22 miles [35.4 km] to the southeast)
- Jump to our Gazetteer entry for Nemo
- Nemo is located in Hickory County
- Pittsburg
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Pittsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pittsburg
- Pittsburg is located in Hickory County
- Jump to TripAdvisor's Tourism page for Pittsburg <2>
- Polk County
- The following are listed by their distance from Iconium, with the one closest to Iconium listed first.
- Flemington
(20 miles [32.2 km] to the south)
- Note: The GPS coordinates that we are using for Flemington have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Flemington
- Flemington is located in Polk County
- Population from the 2020 Census: 146 people
- Humansville
(21 miles [33.8 km] to the south)
- Sentinel
(25 miles [40.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Sentinel. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sentinel
- Sentinel is located in Polk County
- Former name for Sentinel:
- Sentinel Prairie
- Dunnegan
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Dunnegan have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunnegan
- Dunnegan is located in Polk County
- Polk
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Polk have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Polk
- Polk is located in Polk County
For an expanded list of the communities that are closest to Iconium, see our County-by-County Page for Iconium.
Cemeteries Near Iconium ...
Below are cemeteries that are in the vicinity of Iconium.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Iconium covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Iconium, with the one closest to Iconium listed first.
- Iconium Cemetery
(Less than 2 miles to the south)
- Jump to our Gazetteer entry for the Iconium Cemetery
- Note: The GPS coordinates that we are using for the Iconium Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Shiloh Cemetery
(3 miles [4.8 km] to the east)
- Jump to our Gazetteer entry for the Shiloh Cemetery
- Note: The GPS coordinates that we are using for the Shiloh Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Bear Creek Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the Bear Creek Cemetery
- Note: The GPS coordinates that we are using for the Bear Creek Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Harper Cemetery
(4 miles [6.4 km] to the southeast)
- Jump to our Gazetteer entry for the Harper Cemetery
- Note: The GPS coordinates that we are using for the Harper Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Bird Cemetery
(4 miles [6.4 km] to the southeast)
- Jump to our Gazetteer entry for the Bird Cemetery
- Note: The GPS coordinates that we are using for the Bird Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Akens Cemetery
(4 miles [6.4 km] to the northeast)
- Jump to our Gazetteer entry for the Akens Cemetery
- Note: The GPS coordinates that we are using for the Akens Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Cobb Cemetery
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for the Cobb Cemetery
- Note: The GPS coordinates that we are using for the Cobb Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Harris Bend Cemetery
(5 miles [8 km] to the north)
- Jump to our Gazetteer entry for the Harris Bend Cemetery
- Note: The GPS coordinates that we are using for the Harris Bend Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Springstube Cemetery
(6 miles [9.7 km] to the west)
- Jump to our Gazetteer entry for the Springstube Cemetery
- Note: The GPS coordinates that we are using for the Springstube Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Mt. Zion Cemetery
(6 miles [9.7 km] to the southeast)
- Jump to our Gazetteer entry for the Mt. Zion Cemetery
- Note: The GPS coordinates that we are using for the Mt. Zion Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Tally Bend Cemetery
(6 miles [9.7 km] to the northwest)
- Jump to our Gazetteer entry for the Tally Bend Cemetery
- Note: The GPS coordinates that we are using for the Tally Bend Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Wisdom Cemetery
(6 miles [9.7 km] to the northeast)
- Jump to our Gazetteer entry for the Wisdom Cemetery
- Note: The GPS coordinates that we are using for the Wisdom Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Continue List (239 more) ...
- Gilbert Cemetery
(6 miles [9.7 km] to the north)
- Jump to our Gazetteer entry for the Gilbert Cemetery
- Note: The GPS coordinates that we are using for the Gilbert Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Wisner #2 Cemetery
(7 miles [11.3 km] to the southwest)
- Jump to our Gazetteer entry for the Wisner #2 Cemetery
- Note: The GPS coordinates that we are using for the Wisner #2 Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Wisner #1 Cemetery
(7 miles [11.3 km] to the southwest)
- Jump to our Gazetteer entry for the Wisner #1 Cemetery
- Note: The GPS coordinates that we are using for the Wisner #1 Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>
The Rand McNally Atlas shows that Iconium had a population of 52 people in 1895 with a post office and no railroad service.
These communities are listed based on their distance from Iconium, with the one closest to Iconium listed first.
- Harper
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Harper have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harper
- Harper is located in Saint Clair County
- Bentonville
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Bentonville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bentonville
- Bentonville is located in Benton County
- Baker ‑ Historic
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Baker have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Baker
- Baker is located in Saint Clair County
- Quincy
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Quincy have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Quincy
- Quincy is located in Hickory County
- Finey
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Finey have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Finey
- Finey is located in Henry County
- Fairfield ‑ Historic
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Fairfield have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairfield
- Fairfield is located in Benton County
- Osceola
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Osceola have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Osceola
- Osceola is located in Saint Clair County
- Population from the 2020 Census: 935 people
- Jump to TripAdvisor's Tourism page for Osceola <2>
- Terry
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Terry have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Terry
- Terry is located in Saint Clair County
- Mount Zion
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Mount Zion have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Zion
- Mount Zion is located in Henry County
- Vista
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Vista have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vista
- Vista is located in Saint Clair County
- Population from the 2020 Census: 47 people
- Avery
(10 miles [16.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Avery. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Avery
- Avery is located in Hickory County
- Tackner
(10 miles [16.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Tackner. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Tackner
- Tackner is located in Benton County
- Continue List (15 more) ...
- Lowry City
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Lowry City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lowry City
- Lowry City is located in Saint Clair County
- Population from the 2020 Census: 630 people
- Jump to TripAdvisor's Tourism page for Lowry City <2>
- Wheatland
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Wheatland have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wheatland
- Wheatland is located in Hickory County
- Population from the 2020 Census: 373 people
- Jump to TripAdvisor's Tourism page for Wheatland <2>
- Warsaw
(13 miles [20.9 km] to the northeast)
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Iconium. See our List of 1890's Communities around Iconium.
Newspapers Published in Iconium ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 99 newspapers that have been published in the area around Iconium.
Although we're unaware of any newspapers that were published in the immediate area of Iconium, there are papers which were published within 30 miles [48.3 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Iconium.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Iconium:
- Websites specific to Missouri
- Pages specific to Saint Clair County
- Genealogy information for nearby counties
- Bates County
- Benton County
- Camden County
- Cedar County
- Dallas County
- Henry County
- Hickory County
- Polk County
- Cemetery Information and Directories for Missouri
Off-the-Road Links ...
Unfortunately, we don't know of a website for Iconium. If you can help, please contact us through our Feedback Page.
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
<1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Iconium, please let us know so that we can improve our accuracy. |
<5> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Iconium) to Point B.Our distance measurements begin at a specific point in Iconium. The point we use is located at these GPS coordinates - Latitude: 38.1059, Longitude: -93.5447 In this case, the coordinates for Iconium have been provided by the Geographic Names Information System (GNIS). |