|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Edgewood had a post office and railroad service.
The following communities are listed based on their distance from Edgewood, with the one closest to Edgewood listed first.
- Cyrene
(Less than 2 miles to the northwest)
- Jump to our Gazetteer entry for Cyrene
- Cyrene is located in Pike County
- Eolia
(4 miles [6.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Eolia. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Eolia
- Eolia is located in Pike County
- Population from the 2020 Census: 508 people
- Jump to TripAdvisor's Tourism page for Eolia <3>
- Calumet
(5 miles [8 km] to the northeast)
- Jump to our Gazetteer entry for Calumet
- Calumet is located in Pike County
- Whiteside
(6 miles [9.7 km] to the southeast)
- Jump to our Gazetteer entry for Whiteside
- Whiteside is located in Lincoln County
- Population from the 2020 Census: 84 people
- Louisville
(7 miles [11.3 km] to the southwest)
- Jump to our Gazetteer entry for Louisville
- Louisville is located in Lincoln County
- Stark
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Stark have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stark
- Stark is located in Pike County
- Saint Clement
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Saint Clement have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Clement
- Saint Clement is located in Pike County
- Ashley
(7 miles [11.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Ashley. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Ashley
- Ashley is located in Pike County
- Bowling Green
(8 miles [12.9 km] to the northwest)
- Paynesville
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Paynesville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Paynesville
- Paynesville is located in Pike County
- Population from the 2020 Census: 74 people
- Silex
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Silex have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Silex
- Silex is located in Lincoln County
- Population from the 2020 Census: 294 people
- Sledd
(10 miles [16.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Sledd. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Sledd
- Sledd is located in Pike County
- McIntosh
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for McIntosh have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McIntosh
- McIntosh is located in Pike County
- New Hartford
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for New Hartford have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Hartford
- New Hartford is located in Pike County
- Corso
(11 miles [17.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Corso. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Corso
- Corso is located in Lincoln County
- Millwood
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Millwood have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millwood
- Millwood is located in Lincoln County
- Auburn
(11 miles [17.7 km] to the southeast)
- Jump to our Gazetteer entry for Auburn
- Auburn is located in Lincoln County
- Clarksville
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Clarksville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarksville
- Clarksville is located in Pike County
- Population from the 2020 Census: 434 people
- Jump to TripAdvisor's Tourism page for Clarksville <3>
- Quincy Junction
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Quincy Junction have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Quincy Junction
- Quincy Junction is located in Pike County (IL)
- Louisiana
(12 miles [19.3 km] to the north)
- Farmer
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Farmer have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Farmer
- Farmer is located in Pike County
- Briscoe
(13 miles [20.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Briscoe. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Briscoe
- Briscoe is located in Lincoln County
- Annada
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Annada have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Annada
- Annada is located in Pike County
- Population from the 2020 Census: 28 people
- Pike
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Pike have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pike
- Pike is located in Pike County (IL)
- Mackville
(14 miles [22.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Mackville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Mackville
- Mackville is located in Lincoln County
- Okete
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Okete have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Okete
- Okete is located in Lincoln County
- New Hope
(14 miles [22.5 km] to the southeast)
- Jump to our Gazetteer entry for New Hope
- New Hope is located in Lincoln County
Off-the-Road Links ...
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Edgewood, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|