|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Edmonson Baptist Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Edmonson Baptist Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Edmonson Baptist Cemetery. We've listed the following communities based on their distance, with the closest first.
- Edmonson
(Less than 2 miles to the southeast)
- Jump to our Gazetteer entry for Edmonson
- Edmonson is located in Benton County
- Lincoln
(7 miles [11.3 km] to the northwest)
- Warsaw
(9 miles [14.5 km] to the southwest)
- Cole Camp
(9 miles [14.5 km] to the north)
- Tackner
(12 miles [19.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Tackner. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Tackner
- Tackner is located in Benton County
- Palo Pinto
(12 miles [19.3 km] to the west)
- Jump to our Gazetteer entry for Palo Pinto
- Palo Pinto is located in Benton County
- Edwards
(13 miles [20.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Edwards. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Edwards
- Edwards is located in Benton County
- Jump to TripAdvisor's Tourism page for Edwards <2>
- Ionia
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Ionia have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ionia
- Ionia is located in Benton County
- Population from the 2020 Census: 88 people
- Mora
(14 miles [22.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Mora. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Mora
- Mora is located in Benton County
- Racket
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Racket have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Racket
- Racket is located in Benton County
- Stover
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Stover have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stover
- Stover is located in Morgan County
- Population from the 2020 Census: 1,096 people
- Jump to TripAdvisor's Tourism page for Stover <2>
- Tightwad
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Tightwad have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tightwad
- Tightwad is located in Henry County
- Population from the 2020 Census: 61 people
- Spring Fork
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Spring Fork have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Fork
- Spring Fork is located in Pettis County
- Avery
(18 miles [29 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Avery. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Avery
- Avery is located in Hickory County
- Climax Springs
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Climax Springs have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Climax Springs
- Climax Springs is located in Camden County
- Estimated population in 2015: 120 people
- Jump to TripAdvisor's Tourism page for Climax Springs <2>
- Yolo
(18 miles [29 km] to the northwest)
- Jump to our Gazetteer entry for Yolo
- Yolo is located in Henry County
- Cross Timbers
(20 miles [32.2 km] to the south)
- Jump to our Gazetteer entry for Cross Timbers
- Cross Timbers is located in Hickory County
- Population from the 2020 Census: 213 people
- Barnumton
(21 miles [33.8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Barnumton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Barnumton
- Barnumton is located in Camden County
- Windsor
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Windsor have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Windsor
- Windsor is located in Henry County
- Population from the 2020 Census: 2,813 people
- Jump to TripAdvisor's Tourism page for Windsor <2>
- Green Ridge
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Green Ridge have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Green Ridge
- Green Ridge is located in Pettis County
- Population from the 2020 Census: 495 people
- Gravois Mills
(22 miles [35.4 km] to the east)
- Versailles
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for Versailles have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Versailles
- Versailles is located in Morgan County
- Population from the 2020 Census: 2,478 people
- Jump to TripAdvisor's Tourism page for Versailles <2>
- Laurie
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Laurie have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Laurie
- Laurie is located in Morgan County
- Population from the 2020 Census: 980 people
- Jump to TripAdvisor's Tourism page for Laurie <2>
- Florence
(23 miles [37 km] to the northeast)
- Jump to our Gazetteer entry for Florence
- Florence is located in Morgan County
- Calhoun
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Calhoun have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calhoun
- Calhoun is located in Henry County
- Population from the 2020 Census: 456 people
- Alberta
(23 miles [37 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Alberta. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Alberta
- Alberta is located in Henry County
Off-the-Road Links ...
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Edmonson Baptist Cemetery. The point we use is located at these GPS coordinates - Latitude: 38.3200, Longitude: -93.2350 In this case, the coordinates for the Edmonson Baptist Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|