|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Butcher in the Atlas, the following communities of the 1890's would have been found near the current location of Butcher. The following communities are listed based on their distance, with the one closest to Butcher listed first.
- Terry
(2 miles [3.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Terry have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Terry
- Terry is located in Saint Clair County
- Quincy
(3 miles [4.8 km] to the north)
- Note: The GPS coordinates that we are using for Quincy have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Quincy
- Quincy is located in Hickory County
- Wheatland
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Wheatland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wheatland
- Wheatland is located in Hickory County
- Population from the 2020 Census: 373 people
- Jump to TripAdvisor's Tourism page for Wheatland <3>
- Weaubleau
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Weaubleau have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Weaubleau
- Weaubleau is located in Hickory County
- Population from the 2020 Census: 410 people
- Jump to TripAdvisor's Tourism page for Weaubleau <3>
- Harper
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Harper have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harper
- Harper is located in Saint Clair County
- Collins
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Collins have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Collins
- Collins is located in Saint Clair County
- Population from the 2020 Census: 159 people
- Jump to TripAdvisor's Tourism page for Collins <3>
- Elkton
(8 miles [12.9 km] to the southeast)
- Jump to our Gazetteer entry for Elkton
- Elkton is located in Hickory County
- Galmey
(8 miles [12.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Galmey. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Galmey
- Galmey is located in Hickory County
- Hermitage
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Hermitage have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hermitage
- Hermitage is located in Hickory County
- Population from the 2020 Census: 461 people
- Jump to TripAdvisor's Tourism page for Hermitage <3>
- Bentonville
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Bentonville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bentonville
- Bentonville is located in Benton County
- Vista
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Vista have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vista
- Vista is located in Saint Clair County
- Population from the 2020 Census: 47 people
- Iconium
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Iconium have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Iconium
- Iconium is located in Saint Clair County
- Avery
(10 miles [16.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Avery. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Avery
- Avery is located in Hickory County
- Humansville
(12 miles [19.3 km] to the south)
- Osceola
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Osceola have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Osceola
- Osceola is located in Saint Clair County
- Population from the 2020 Census: 935 people
- Jump to TripAdvisor's Tourism page for Osceola <3>
- Rondo
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Rondo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rondo
- Rondo is located in Polk County
- Pittsburg
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Pittsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pittsburg
- Pittsburg is located in Hickory County
- Jump to TripAdvisor's Tourism page for Pittsburg <3>
- Cobb
(14 miles [22.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Cobb. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Cobb
- Cobb is located in Saint Clair County
- Cross Timbers
(14 miles [22.5 km] to the east)
- Jump to our Gazetteer entry for Cross Timbers
- Cross Timbers is located in Hickory County
- Population from the 2020 Census: 213 people
- Fairfield ‑ Historic
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Fairfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairfield
- Fairfield is located in Benton County
- Sentinel
(15 miles [24.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Sentinel. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Sentinel
- Sentinel is located in Polk County
- Former name for Sentinel:
- Sentinel Prairie
- Preston
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Preston have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Preston
- Preston is located in Hickory County
- Population from the 2020 Census: 220 people
- Jump to TripAdvisor's Tourism page for Preston <3>
- Rookins
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Rookins have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rookins
- Rookins is located in Saint Clair County
- Baker ‑ Historic
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Baker have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Baker
- Baker is located in Saint Clair County
- Lowry City
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Lowry City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lowry City
- Lowry City is located in Saint Clair County
- Population from the 2020 Census: 630 people
- Jump to TripAdvisor's Tourism page for Lowry City <3>
- Roscoe
(17 miles [27.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Roscoe. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Roscoe
- Roscoe is located in Saint Clair County
- Population from the 2020 Census: 121 people
- Jump to TripAdvisor's Tourism page for Roscoe <3>
Off-the-Road Links ...
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Butcher, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|