Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Arnett in the Atlas, the following communities of the 1890's would have been found near the current location of Arnett. The following communities are listed based on their distance, with the one closest to Arnett listed first.
- Jane
(4 miles [6.4 km] to the west)- Jump to our Gazetteer entry for Jane
- Jane is located in McDonald County
- Population from the 2020 Census: 311 people
- Jump to TripAdvisor's Tourism page for Jane <2>
- Cyclone
(4 miles [6.4 km] to the northwest) - Powell
(4 miles [6.4 km] to the northeast) - Caverna
(5 miles [8 km] to the southwest) - Bethpage
(8 miles [12.9 km] to the north) - Pea Ridge
(9 miles [14.5 km] to the southeast)- Note: The GPS coordinates that we are using for Pea Ridge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pea Ridge
- Pea Ridge is located in Benton County (AR)
- Population from the 2020 Census: 6,452 people
- Jump to TripAdvisor's Tourism page for Pea Ridge <2>
- Pineville
(9 miles [14.5 km] to the west)- Note: The GPS coordinates that we are using for Pineville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pineville
- Pineville is located in McDonald County
- Population from the 2020 Census: 810 people
- Jump to TripAdvisor's Tourism page for Pineville <2>
- Mayflower
(10 miles [16.1 km] to the east) - Buttry ‑ Historic
(11 miles [17.7 km] to the southeast) - Seba
(13 miles [20.9 km] to the south) - Bentonville
(13 miles [20.9 km] to the south)- Jump to our Gazetteer entry for Bentonville
- Bentonville is located in Benton County (AR)
- Population from the 2020 Census: 57,537 people
- Jump to TripAdvisor's Tourism page for Bentonville <2>
- Avoca
(13 miles [20.9 km] to the southeast)- Jump to our Gazetteer entry for Avoca
- Avoca is located in Benton County (AR)
- Population from the 2020 Census: 522 people
- Brightwater
(13 miles [20.9 km] to the southeast)- Note: The GPS coordinates that we are using for Brightwater have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brightwater
- Brightwater is located in Benton County (AR)
- Erie
(13 miles [20.9 km] to the northwest) - Stella
(13 miles [20.9 km] to the north)- Note: The GPS coordinates that we are using for Stella have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stella
- Stella is located in Newton County
- Population from the 2020 Census: 153 people
- Jump to TripAdvisor's Tourism page for Stella <2>
- Anderson
(13 miles [20.9 km] to the northwest)- Jump to our Gazetteer entry for Anderson
- Anderson is located in McDonald County
- Population from the 2020 Census: 1,915 people
- Jump to TripAdvisor's Tourism page for Anderson <2>
- Sulphur Springs
(14 miles [22.5 km] to the southwest)- Note: The GPS coordinates that we are using for Sulphur Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sulphur Springs
- Sulphur Springs is located in Benton County (AR)
- Population from the 2020 Census: 531 people
- Jump to TripAdvisor's Tourism page for Sulphur Springs <2>
- Washburn
(14 miles [22.5 km] to the east)- Jump to our Gazetteer entry for Washburn
- Washburn is located in Barry County
- Population from the 2020 Census: 432 people
- Jump to TripAdvisor's Tourism page for Washburn <2>
- Rocky Comfort
(14 miles [22.5 km] to the northeast)- Note: The GPS coordinates that we are using for Rocky Comfort have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rocky Comfort
- Rocky Comfort is located in McDonald County
- Noel
(14 miles [22.5 km] to the west)- Note: The GPS coordinates that we are using for Noel have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Noel
- Noel is located in McDonald County
- Population from the 2020 Census: 1,808 people
- Jump to TripAdvisor's Tourism page for Noel <2>
- Round Top ‑ Historic
(15 miles [24.1 km] to the west) - Nebo
(15 miles [24.1 km] to the southwest) - Pond ‑ Historic
(15 miles [24.1 km] to the southwest) - Garfield
(15 miles [24.1 km] to the southeast)- Note: The GPS coordinates that we are using for Garfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Garfield
- Garfield is located in Benton County (AR)
- Population from the 2020 Census: 597 people
- Jump to TripAdvisor's Tourism page for Garfield <2>
- Seligman
(15 miles [24.1 km] to the east)
Off-the-Road Links ...
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Arnett, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |