Census Data for Bellaire
As far as we can tell, Bellaire has not been included in past Census counts, so there is no population information for this community.
While we don't have census information for Bellaire, you might be interested in some nearby communities where we do:
- Birchwood Village
(Less than 2 miles to the southeast)- Note: The GPS coordinates that we are using for Birchwood Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Birchwood Village
- Birchwood Village is located in Washington County
- Mahtomedi
(Less than 2 miles to the east)- Note: We haven't been able to verify our GPS coordinates for Mahtomedi. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Mahtomedi
- Mahtomedi is located in Washington County
- Jump to TripAdvisor's Tourism page for Mahtomedi <3>
- White Bear Lake
(Less than 2 miles to the northwest)- Jump to our Gazetteer entry for White Bear Lake
- White Bear Lake is located in Ramsey County
- Jump to TripAdvisor's Tourism page for White Bear Lake <3>
- Dellwood
(2 miles [3.2 km] to the northeast) - Gem Lake
(2 miles [3.2 km] to the west) - Willernie
(2 miles [3.2 km] to the southeast)- Note: The GPS coordinates that we are using for Willernie have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willernie
- Willernie is located in Washington County
- Jump to TripAdvisor's Tourism page for Willernie <3>
- Maplewood
(3 miles [4.8 km] to the south)- Jump to our Gazetteer entry for Maplewood
- Maplewood is located in Ramsey County
- Jump to TripAdvisor's Tourism page for Maplewood <3>
- North Saint Paul
(3 miles [4.8 km] to the south)- Note: The GPS coordinates that we are using for North Saint Paul have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Saint Paul
- North Saint Paul is located in Ramsey County
- Jump to TripAdvisor's Tourism page for North Saint Paul <3>
- Pine Springs
(3 miles [4.8 km] to the southeast)- Note: The GPS coordinates that we are using for Pine Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pine Springs
- Pine Springs is located in Washington County
- Grant
(4 miles [6.4 km] to the east) - North Oaks
(4 miles [6.4 km] to the west)- Jump to our Gazetteer entry for North Oaks
- North Oaks is located in Ramsey County
- Jump to TripAdvisor's Tourism page for North Oaks <3>
- Vadnais Heights
(4 miles [6.4 km] to the west)- Note: The GPS coordinates that we are using for Vadnais Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vadnais Heights
- Vadnais Heights is located in Ramsey County
- Jump to TripAdvisor's Tourism page for Vadnais Heights <3>
- Continue List (231 more) ...
- Little Canada
(5 miles [8 km] to the southwest)- Note: The GPS coordinates that we are using for Little Canada have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little Canada
- Little Canada is located in Ramsey County
- Jump to TripAdvisor's Tourism page for Little Canada <3>
- Oakdale
(5 miles [8 km] to the south)- Note: The GPS coordinates that we are using for Oakdale have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oakdale
- Oakdale is located in Washington County
- Jump to TripAdvisor's Tourism page for Oakdale <3>
- Hugo
(6 miles [9.7 km] to the north)- Jump to our Gazetteer entry for Hugo
- Hugo is located in Washington County
- Jump to TripAdvisor's Tourism page for Hugo <3>
- Little Canada
Ramsey County ...
Bellaire is located in Ramsey County<4>.
For more information, please visit our Census Page for Ramsey County.
Miscellaneous Information for Bellaire ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Ramsey County or the community of Bellaire:
- The GNIS Codes ...
- The FIPS Codes ...
- An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
- State Code: 27 (Minnesota)
- County Code: 123 (Ramsey County)
- Place Code: 04780 (Bellaire)
- State & County Code: 27/123 (Minnesota / Ramsey County)
- State & Place Code: 27/04780 (Minnesota / Bellaire)
- Misc. Census Codes ...
- Bellaire is located in Census Region #2 (the Midwest Region) and Division #4 (the West North-Central Division).
For more information about the various Federal identification codes, please visit our Misc Page for Bellaire.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Bellaire. If you can help, please contact us through our Feedback Page.
The official website for Ramsey County: www.co.ramsey.mn.us/
The official website for State of Minnesota: https://mn.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Footnotes ...
| <1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | If you're interested in how the shape of Minnesota's counties, including Ramsey, have changed over time, we recommend the Atlas of Historical County Boundaries. |