|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Youngtown in the Atlas, the following communities of the 1890's would have been found near the current location of Youngtown. The following communities are listed based on their distance, with the one closest to Youngtown listed first.
- Hope
(3 miles [4.8 km] to the west)
- Camden
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Camden have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Camden
- Camden is located in Knox County
- Population from the 2020 Census: 4,806 people
- Jump to TripAdvisor's Tourism page for Camden <2>
- Lincolnville
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Lincolnville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lincolnville
- Lincolnville is located in Waldo County
- Population from the 2020 Census: 2,252 people
- Jump to TripAdvisor's Tourism page for Lincolnville <2>
- South Hope
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for South Hope have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Hope
- South Hope is located in Knox County
- Rockport
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Rockport have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockport
- Rockport is located in Knox County
- Population from the 2020 Census: 3,389 people
- Jump to TripAdvisor's Tourism page for Rockport <2>
- North Appleton
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for North Appleton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Appleton
- North Appleton is located in Knox County
- East Union
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for East Union have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Union
- East Union is located in Knox County
- Rockville
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Rockville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockville
- Rockville is located in Knox County
- Appleton
(7 miles [11.3 km] to the west)
- Belmont
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Belmont have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belmont
- Belmont is located in Waldo County
- Population from the 2020 Census: 911 people
- Center Belmont
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Center Belmont have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Center Belmont
- Center Belmont is located in Waldo County
- Northport
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Northport have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Northport
- Northport is located in Waldo County
- Population from the 2020 Census: 1,593 people
- Jump to TripAdvisor's Tourism page for Northport <2>
- Searsmont
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Searsmont have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Searsmont
- Searsmont is located in Waldo County
- Population from the 2020 Census: 1,424 people
- Jump to TripAdvisor's Tourism page for Searsmont <2>
- Union
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Union have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union
- Union is located in Knox County
- Population from the 2020 Census: 2,275 people
- Jump to TripAdvisor's Tourism page for Union <2>
- South Union
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for South Union have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Union
- South Union is located in Knox County
- East Northport
(9 miles [14.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for East Northport. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for East Northport
- East Northport is located in Waldo County
- West Appleton
(9 miles [14.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for West Appleton. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for West Appleton
- West Appleton is located in Knox County
- North Islesboro
(10 miles [16.1 km] to the northeast)
- Jump to our Gazetteer entry for North Islesboro
- North Islesboro is located in Waldo County
- North Union
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for North Union have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Union
- North Union is located in Knox County
- Rockland
(11 miles [17.7 km] to the south)
- North Searsmont
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for North Searsmont have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Searsmont
- North Searsmont is located in Waldo County
- Belfast
(11 miles [17.7 km] to the north)
- West Searsmont
(11 miles [17.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for West Searsmont. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for West Searsmont
- West Searsmont is located in Waldo County
- South Montville
(11 miles [17.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for South Montville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for South Montville
- South Montville is located in Waldo County
- Burkettville
(11 miles [17.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Burkettville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Burkettville
- Burkettville is located in Knox County
Off-the-Road Links ...
The official website for State of Maine: https://www.maine.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Youngtown, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|