RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Maine >> Franklin County >> Weld >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
Maine

The Commemorative Quarter for Maine





Nearest Communities to Weld,
Listed County-By-County

The purpose of this page is to identify those communities that are closest to Weld, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Weld:

We have great-grandparents who lived in a small community in the southeast corner of their home county. During their lives, most hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.

Keep in mind that when we give a distance, it's a 'straight-line' distance from Weld.<1>

If you're researching your genealogy, we hope that the following information helps.

Weld is located in Franklin County.

The following 4 counties adjoin and form the boundaries of Franklin County: Androscoggin, Kennebec, Oxford & Somerset.

Our Gazetteer shows that there are 198 communities within 40 miles [64.4 km]<1> of Weld. Of these communities, 121 are located in counties other than Franklin County.

We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.

After starting with the home county for Weld (which is Franklin County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Weld

For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.

  • Franklin County   (where Weld resides)
    • County Seat for Franklin:   Farmington
    • Note: The Canadian Province of Quebec lies to the north
    • Genealogy Websites   ...
    • Nearest Communities to Weld   ...
      • These communities are listed by their distance from Weld.
      • Weld Corner
        (2 miles [3.2 km] to the northwest)
        • Note: The GPS coordinates that we are using for Weld Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Weld Corner
        • Weld Corner is located in Franklin County
      • Chase Corner
        (3 miles [4.8 km] to the north)
        • Note: The GPS coordinates that we are using for Chase Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Chase Corner
        • Chase Corner is located in Franklin County
      • Hildreths Mill
        (3 miles [4.8 km] to the southeast)
        • Note: The GPS coordinates that we are using for Hildreths Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Hildreths Mill
        • Hildreths Mill is located in Franklin County
      • Perkin's Plantation ‑ Historic
        (3 miles [4.8 km] to the southeast)
      • Berry Mills
        (4 miles [6.4 km] to the south)
      • Carthage
        (5 miles [8 km] to the southwest)
        • Note: The GPS coordinates that we are using for Carthage have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Carthage
        • Carthage is located in Franklin County
        • Population from the 2020 Census: 536 people
      • Wilton Intervale
        (7 miles [11.3 km] to the southeast)
        • Note: The GPS coordinates that we are using for Wilton Intervale have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Wilton Intervale
        • Wilton Intervale is located in Franklin County
      • Temple Intervale
        (8 miles [12.9 km] to the east)
        • Note: The GPS coordinates that we are using for Temple Intervale have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Temple Intervale
        • Temple Intervale is located in Franklin County
      • Tainter Corner
        (8 miles [12.9 km] to the south)
        • Note: The GPS coordinates that we are using for Tainter Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Tainter Corner
        • Tainter Corner is located in Franklin County
      • Temple
        (9 miles [14.5 km] to the east)
        • Note: The GPS coordinates that we are using for Temple have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Temple
        • Temple is located in Franklin County
        • Population from the 2020 Census: 518 people
      • Butterfield ‑ Historic
        (9 miles [14.5 km] to the north)
        • Note: The GPS coordinates that we are using for Butterfield have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Butterfield
        • Butterfield is located in Franklin County
      • Phillips
        (9 miles [14.5 km] to the northeast)
      • Continue List   (65 more) ...
        • Avon Corner
          (10 miles [16.1 km] to the northeast)
          • Note: The GPS coordinates that we are using for Avon Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Avon Corner
          • Avon Corner is located in Franklin County
        • Avon
          (10 miles [16.1 km] to the northeast)
          • Note: The GPS coordinates that we are using for Avon have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Avon
          • Avon is located in Franklin County
          • Population from the 2020 Census: 438 people
        • East Dixfield
          (10 miles [16.1 km] to the southeast)
          • Note: The GPS coordinates that we are using for East Dixfield have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for East Dixfield
          • East Dixfield is located in Franklin County
        • Madrid Junction
          (11 miles [17.7 km] to the north)
          • Note: The GPS coordinates that we are using for Madrid Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Madrid Junction
          • Madrid Junction is located in Franklin County
        • Madrid
          (11 miles [17.7 km] to the north)
        • South Strong
          (11 miles [17.7 km] to the northeast)
          • Note: We haven't been able to verify our GPS coordinates for South Strong. Although the coordinates have been estimated, they should be in the vicinity.<4>
          • Jump to our Gazetteer entry for South Strong
          • South Strong is located in Franklin County
          • Google driving directions:
          • From your current location to South Strong
          • From Weld to South Strong
        • Wilton
          (11 miles [17.7 km] to the southeast)
          • Note: The GPS coordinates that we are using for Wilton have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Wilton
          • Wilton is located in Franklin County
          • Population from the 2020 Census: 3,929 people
          • Jump to TripAdvisor's Tourism page for Wilton <5>
        • Fairbanks
          (12 miles [19.3 km] to the east)
        • Strong
          (12 miles [19.3 km] to the northeast)
        • Dryden
          (12 miles [19.3 km] to the southeast)
        • East Wilton
          (12 miles [19.3 km] to the southeast)
          • Note: The GPS coordinates that we are using for East Wilton have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for East Wilton
          • East Wilton is located in Franklin County
        • Farmington
          (13 miles [20.9 km] to the east)
        • West Farmington
          (13 miles [20.9 km] to the east)
          • Note: The GPS coordinates that we are using for West Farmington have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for West Farmington
          • West Farmington is located in Franklin County
        • Reeds
          (13 miles [20.9 km] to the north)
          • Note: The GPS coordinates that we are using for Reeds have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Reeds
          • Reeds is located in Franklin County
        • North Jay
          (13 miles [20.9 km] to the southeast)
          • Note: The GPS coordinates that we are using for North Jay have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Jay
          • North Jay is located in Franklin County
        • East Madrid
          (14 miles [22.5 km] to the north)
          • Note: We haven't been able to verify our GPS coordinates for East Madrid. Although the coordinates have been estimated, they should be in the vicinity.<4>
          • Jump to our Gazetteer entry for East Madrid
          • East Madrid is located in Franklin County
          • Google driving directions:
          • From your current location to East Madrid
          • From Weld to East Madrid
        • Beans Corner
          (14 miles [22.5 km] to the southeast)
          • Note: The GPS coordinates that we are using for Beans Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Beans Corner
          • Beans Corner is located in Franklin County
        • MacQuillis Corner
          (14 miles [22.5 km] to the southeast)
          • Note: The GPS coordinates that we are using for MacQuillis Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for MacQuillis Corner
          • MacQuillis Corner is located in Franklin County
        • Knowltons Corner
          (15 miles [24.1 km] to the east)
          • Note: The GPS coordinates that we are using for Knowltons Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Knowltons Corner
          • Knowltons Corner is located in Franklin County
        • Perham Junction
          (15 miles [24.1 km] to the north)
          • Note: The GPS coordinates that we are using for Perham Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Perham Junction
          • Perham Junction is located in Franklin County
        • Salem
          (15 miles [24.1 km] to the northeast)
          • Note: The GPS coordinates that we are using for Salem have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Salem
          • Salem is located in Franklin County
        • Sandy River Plantation
          (15 miles [24.1 km] to the northwest)
          • Note: The GPS coordinates that we are using for Sandy River Plantation have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Sandy River Plantation
          • Sandy River Plantation is located in Franklin County
          • Population from the 2020 Census: 127 people
        • Ten Degree
          (15 miles [24.1 km] to the northwest)
          • Note: The GPS coordinates that we are using for Ten Degree have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Ten Degree
          • Ten Degree is located in Franklin County
        • Riley
          (15 miles [24.1 km] to the southeast)
          • Note: The GPS coordinates that we are using for Riley have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Riley
          • Riley is located in Franklin County
        • Allens Mills
          (16 miles [25.7 km] to the east)
          • Note: The GPS coordinates that we are using for Allens Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Allens Mills
          • Allens Mills is located in Franklin County
        • Overlake
          (16 miles [25.7 km] to the east)
          • Note: The GPS coordinates that we are using for Overlake have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Overlake
          • Overlake is located in Franklin County
        • Barnjum
          (16 miles [25.7 km] to the north)
          • Note: The GPS coordinates that we are using for Barnjum have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Barnjum
          • Barnjum is located in Franklin County
        • New Vineyard
          (16 miles [25.7 km] to the northeast)
        • Jay
          (16 miles [25.7 km] to the southeast)
        • North Chesterville
          (16 miles [25.7 km] to the southeast)
        • Bullen Mills
          (17 miles [27.4 km] to the east)
          • Note: The GPS coordinates that we are using for Bullen Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Bullen Mills
          • Bullen Mills is located in Franklin County
        • Farmington Falls
          (17 miles [27.4 km] to the east)
        • Goodrich Corner
          (17 miles [27.4 km] to the east)
          • Note: The GPS coordinates that we are using for Goodrich Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Goodrich Corner
          • Goodrich Corner is located in Franklin County
        • Industry
          (18 miles [29 km] to the east)
          • Note: The GPS coordinates that we are using for Industry have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Industry
          • Industry is located in Franklin County
          • Population from the 2020 Census: 927 people
        • Weeks Mills
          (18 miles [29 km] to the east)
          • Note: The GPS coordinates that we are using for Weeks Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Weeks Mills
          • Weeks Mills is located in Franklin County
        • Bemis
          (18 miles [29 km] to the northwest)
        • Chisholm
          (18 miles [29 km] to the southeast)
          • Note: The GPS coordinates that we are using for Chisholm have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Chisholm
          • Chisholm is located in Franklin County
        • Stones Corner
          (18 miles [29 km] to the southeast)
          • Note: The GPS coordinates that we are using for Stones Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Stones Corner
          • Stones Corner is located in Franklin County
        • Redington
          (19 miles [30.6 km] to the north)
          • Note: The GPS coordinates that we are using for Redington have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Redington
          • Redington is located in Franklin County
        • Soule Mill
          (19 miles [30.6 km] to the northeast)
          • Note: The GPS coordinates that we are using for Soule Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Soule Mill
          • Soule Mill is located in Franklin County
        • Chesterville
          (19 miles [30.6 km] to the southeast)
          • Note: The GPS coordinates that we are using for Chesterville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Chesterville
          • Chesterville is located in Franklin County
          • Population from the 2020 Census: 1,348 people
        • New Sharon
          (20 miles [32.2 km] to the east)
          • Note: The GPS coordinates that we are using for New Sharon have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for New Sharon
          • New Sharon is located in Franklin County
          • Population from the 2020 Census: 1,424 people
          • Jump to TripAdvisor's Tourism page for New Sharon <5>
        • West Mills
          (20 miles [32.2 km] to the east)
          • Note: The GPS coordinates that we are using for West Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for West Mills
          • West Mills is located in Franklin County
        • Dallas
          (21 miles [33.8 km] to the north)
          • Note: The GPS coordinates that we are using for Dallas have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Dallas
          • Dallas is located in Franklin County
        • Rangeley
          (21 miles [33.8 km] to the northwest)
        • Dallas Plantation
          (22 miles [35.4 km] to the north)
          • Note: The GPS coordinates that we are using for Dallas Plantation have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Dallas Plantation
          • Dallas Plantation is located in Franklin County
          • Population from the 2020 Census: 294 people
        • Dead River ‑ Historic
          (22 miles [35.4 km] to the north)
          • Note: The GPS coordinates that we are using for Dead River have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Dead River
          • Dead River is located in Franklin County
        • Kingfield
          (22 miles [35.4 km] to the northeast)
        • Macy
          (22 miles [35.4 km] to the northwest)
          • Note: The GPS coordinates that we are using for Macy have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Macy
          • Macy is located in Franklin County
        • Mingo Springs
          (22 miles [35.4 km] to the northwest)
          • Note: The GPS coordinates that we are using for Mingo Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Mingo Springs
          • Mingo Springs is located in Franklin County
        • Loon Lake
          (23 miles [37 km] to the northwest)
          • Note: The GPS coordinates that we are using for Loon Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Loon Lake
          • Loon Lake is located in Franklin County
        • South Rangeley
          (23 miles [37 km] to the northwest)
          • Note: The GPS coordinates that we are using for South Rangeley have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for South Rangeley
          • South Rangeley is located in Franklin County
        • Mountainview
          (24 miles [38.6 km] to the northwest)
        • Mooselookmeguntic
          (25 miles [40.2 km] to the northwest)
          • Note: The GPS coordinates that we are using for Mooselookmeguntic have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Mooselookmeguntic
          • Mooselookmeguntic is located in Franklin County
        • Oquossoc
          (25 miles [40.2 km] to the northwest)
          • Note: The GPS coordinates that we are using for Oquossoc have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Oquossoc
          • Oquossoc is located in Franklin County
          • Jump to TripAdvisor's Tourism page for Oquossoc <5>
        • Bigelow
          (26 miles [41.8 km] to the north)
        • Carrabassett Valley
          (26 miles [41.8 km] to the north)
          • Note: The GPS coordinates that we are using for Carrabassett Valley have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Carrabassett Valley
          • Carrabassett Valley is located in Franklin County
          • Population from the 2020 Census: 788 people
          • Jump to TripAdvisor's Tourism page for Carrabassett Valley <5>
        • Coplin Plantation
          (26 miles [41.8 km] to the north)
          • Note: The GPS coordinates that we are using for Coplin Plantation have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Coplin Plantation
          • Coplin Plantation is located in Franklin County
          • Population from the 2020 Census: 158 people
        • Langtown Mill
          (26 miles [41.8 km] to the north)
          • Note: The GPS coordinates that we are using for Langtown Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Langtown Mill
          • Langtown Mill is located in Franklin County
        • The Landing
          (27 miles [43.5 km] to the north)
          • Note: The GPS coordinates that we are using for The Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for The Landing
          • The Landing is located in Franklin County
        • Carrabassett
          (28 miles [45.1 km] to the north)
          • Note: The GPS coordinates that we are using for Carrabassett have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Carrabassett
          • Carrabassett is located in Franklin County
        • Kennebago Settlement
          (28 miles [45.1 km] to the north)
          • Note: The GPS coordinates that we are using for Kennebago Settlement have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Kennebago Settlement
          • Kennebago Settlement is located in Franklin County
        • Kamankeag ‑ Historic
          (28 miles [45.1 km] to the northwest)
          • Note: The GPS coordinates that we are using for Kamankeag have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Kamankeag
          • Kamankeag is located in Franklin County
        • Eustis
          (30 miles [48.3 km] to the north)
        • Stratton
          (30 miles [48.3 km] to the north)
          • Note: The GPS coordinates that we are using for Stratton have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Stratton
          • Stratton is located in Franklin County
          • Jump to TripAdvisor's Tourism page for Stratton <5>
  • Androscoggin County
    • County Seat for Androscoggin:   Auburn
    • Genealogy Websites   ...
    • Nearest Communities to Weld   ...
      • These communities are listed by their distance from Weld.
      • Livermore Falls
        (19 miles [30.6 km] to the southeast)
      • North Livermore
        (20 miles [32.2 km] to the southeast)
      • Shy Corner
        (20 miles [32.2 km] to the southeast)
      • Livermore
        (23 miles [37 km] to the south)
        • Note: The GPS coordinates that we are using for Livermore have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Livermore
        • Livermore is located in Androscoggin County
        • Population from the 2020 Census: 2,131 people
        • Jump to TripAdvisor's Tourism page for Livermore <5>
      • East Livermore
        (23 miles [37 km] to the southeast)
        • Note: The GPS coordinates that we are using for East Livermore have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for East Livermore
        • East Livermore is located in Androscoggin County
      • Haines Corner
        (23 miles [37 km] to the southeast)
        • Note: The GPS coordinates that we are using for Haines Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Haines Corner
        • Haines Corner is located in Androscoggin County
      • Livermore Center
        (23 miles [37 km] to the southeast)
        • Note: The GPS coordinates that we are using for Livermore Center have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Livermore Center
        • Livermore Center is located in Androscoggin County
      • North Turner
        (25 miles [40.2 km] to the south)
        • Note: The GPS coordinates that we are using for North Turner have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for North Turner
        • North Turner is located in Androscoggin County
      • South Livermore
        (25 miles [40.2 km] to the southeast)
      • Stricklands
        (26 miles [41.8 km] to the southeast)
        • Note: The GPS coordinates that we are using for Stricklands have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Stricklands
        • Stricklands is located in Androscoggin County
      • Howes Corner
        (27 miles [43.5 km] to the south)
        • Note: We haven't been able to verify our GPS coordinates for Howes Corner. Although the coordinates have been estimated, they should be in the vicinity.<4>
        • Jump to our Gazetteer entry for Howes Corner
        • Howes Corner is located in Androscoggin County
        • Google driving directions:
        • From your current location to Howes Corner
        • From Weld to Howes Corner
      • North Leeds
        (28 miles [45.1 km] to the southeast)
        • Note: We haven't been able to verify our GPS coordinates for North Leeds. Although the coordinates have been estimated, they should be in the vicinity.<4>
        • Jump to our Gazetteer entry for North Leeds
        • North Leeds is located in Androscoggin County
        • Google driving directions:
        • From your current location to North Leeds
        • From Weld to North Leeds
      • Chase Mills
        (30 miles [48.3 km] to the south)
        • Note: We haven't been able to verify our GPS coordinates for Chase Mills. Although the coordinates have been estimated, they should be in the vicinity.<4>
        • Jump to our Gazetteer entry for Chase Mills
        • Chase Mills is located in Androscoggin County
        • Google driving directions:
        • From your current location to Chase Mills
        • From Weld to Chase Mills
      • West Leeds
        (30 miles [48.3 km] to the southeast)
        • Note: The GPS coordinates that we are using for West Leeds have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for West Leeds
        • West Leeds is located in Androscoggin County
  • Kennebec County
    • County Website:   www.kennebeccounty.org/
    • County Seat for Kennebec:   Augusta
    • Genealogy Websites   ...
    • Nearest Communities to Weld   ...
      • These communities are listed by their distance from Weld.
      • Seaveys Corner
        (22 miles [35.4 km] to the southeast)
        • Note: The GPS coordinates that we are using for Seaveys Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Seaveys Corner
        • Seaveys Corner is located in Kennebec County
      • Twelve Corners
        (22 miles [35.4 km] to the southeast)
        • Note: The GPS coordinates that we are using for Twelve Corners have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Twelve Corners
        • Twelve Corners is located in Kennebec County
      • North Fayette
        (24 miles [38.6 km] to the southeast)
      • Vienna
        (24 miles [38.6 km] to the southeast)
      • Fayette Corner
        (25 miles [40.2 km] to the southeast)
        • Note: The GPS coordinates that we are using for Fayette Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Fayette Corner
        • Fayette Corner is located in Kennebec County
      • Mount Vernon
        (25 miles [40.2 km] to the southeast)
      • Sanderson Corners
        (25 miles [40.2 km] to the southeast)
        • Note: The GPS coordinates that we are using for Sanderson Corners have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Sanderson Corners
        • Sanderson Corners is located in Kennebec County
      • Rome Corner
        (26 miles [41.8 km] to the east)
        • Note: The GPS coordinates that we are using for Rome Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Rome Corner
        • Rome Corner is located in Kennebec County
      • West Mount Vernon
        (26 miles [41.8 km] to the southeast)
        • Note: The GPS coordinates that we are using for West Mount Vernon have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for West Mount Vernon
        • West Mount Vernon is located in Kennebec County
      • Fayette
        (27 miles [43.5 km] to the southeast)
      • Richmond Mill
        (27 miles [43.5 km] to the southeast)
        • Note: The GPS coordinates that we are using for Richmond Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Richmond Mill
        • Richmond Mill is located in Kennebec County
      • Rome
        (28 miles [45.1 km] to the east)
        • Note: The GPS coordinates that we are using for Rome have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Rome
        • Rome is located in Kennebec County
        • Population from the 2020 Census: 1,013 people
        • Jump to TripAdvisor's Tourism page for Rome <5>
      • Continue List   (6 more) ...
        • Belgrade Lakes
          (28 miles [45.1 km] to the southeast)
        • Kents Hill
          (28 miles [45.1 km] to the southeast)
          • Note: The GPS coordinates that we are using for Kents Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Kents Hill
          • Kents Hill is located in Kennebec County
          • Jump to TripAdvisor's Tourism page for Kents Hill <5>
        • Locks Corner
          (28 miles [45.1 km] to the southeast)
        • North Wayne
          (29 miles [46.7 km] to the southeast)
          • Note: We haven't been able to verify our GPS coordinates for North Wayne. Although the coordinates have been estimated, they should be in the vicinity.<4>
          • Jump to our Gazetteer entry for North Wayne
          • North Wayne is located in Kennebec County
          • Google driving directions:
          • From your current location to North Wayne
          • From Weld to North Wayne
        • Wayne
          (29 miles [46.7 km] to the southeast)
          • Note: The GPS coordinates that we are using for Wayne have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Wayne
          • Wayne is located in Kennebec County
          • Population from the 2020 Census: 1,161 people
          • Jump to TripAdvisor's Tourism page for Wayne <5>
        • Readfield
          (30 miles [48.3 km] to the southeast)
          • Note: The GPS coordinates that we are using for Readfield have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Readfield
          • Readfield is located in Kennebec County
          • Population from the 2020 Census: 2,586 people
          • Jump to TripAdvisor's Tourism page for Readfield <5>
  • Oxford County
    • County Website:   www.oxfordcounty.org/
    • County Seat for Oxford:   South Paris
    • Note: The Canadian Province of Quebec lies to the north
    • Genealogy Websites   ...
    • Nearest Communities to Weld   ...
      • These communities are listed by their distance from Weld.
      • Roxbury
        (8 miles [12.9 km] to the west)
      • Frye
        (9 miles [14.5 km] to the southwest)
        • Note: The GPS coordinates that we are using for Frye have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Frye
        • Frye is located in Oxford County
      • Hale
        (10 miles [16.1 km] to the southwest)
        • Note: The GPS coordinates that we are using for Hale have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Hale
        • Hale is located in Oxford County
      • Byron
        (10 miles [16.1 km] to the west)
      • Coos Canyon
        (10 miles [16.1 km] to the west)
        • Note: The GPS coordinates that we are using for Coos Canyon have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Coos Canyon
        • Coos Canyon is located in Oxford County
      • Dixfield Center
        (11 miles [17.7 km] to the south)
        • Note: The GPS coordinates that we are using for Dixfield Center have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Dixfield Center
        • Dixfield Center is located in Oxford County
      • Dixfield
        (11 miles [17.7 km] to the south)
      • Mexico
        (11 miles [17.7 km] to the southwest)
        • Note: The GPS coordinates that we are using for Mexico have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Mexico
        • Mexico is located in Oxford County
        • Population from the 2020 Census: 2,635 people
        • Jump to TripAdvisor's Tourism page for Mexico <5>
      • Ridlonville
        (11 miles [17.7 km] to the southwest)
        • Note: The GPS coordinates that we are using for Ridlonville have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Ridlonville
        • Ridlonville is located in Oxford County
      • Rumford
        (11 miles [17.7 km] to the southwest)
      • West Peru
        (12 miles [19.3 km] to the south)
      • Smith Crossing
        (12 miles [19.3 km] to the southwest)
        • Note: The GPS coordinates that we are using for Smith Crossing have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Smith Crossing
        • Smith Crossing is located in Oxford County
      • Continue List   (58 more) ...
        • Houghton
          (12 miles [19.3 km] to the west)
          • Note: The GPS coordinates that we are using for Houghton have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Houghton
          • Houghton is located in Oxford County
        • Peru
          (13 miles [20.9 km] to the south)
          • Note: We haven't been able to verify our GPS coordinates for Peru. Although the coordinates have been estimated, they should be in the vicinity.<4>
          • Jump to our Gazetteer entry for Peru
          • Peru is located in Oxford County
          • Population from the 2020 Census: 1,509 people
          • Jump to TripAdvisor's Tourism page for Peru <5>
          • Google driving directions:
          • From your current location to Peru
          • From Weld to Peru
        • South Rumford
          (13 miles [20.9 km] to the southwest)
        • Virginia
          (13 miles [20.9 km] to the southwest)
          • Note: The GPS coordinates that we are using for Virginia have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Virginia
          • Virginia is located in Oxford County
        • East Peru
          (14 miles [22.5 km] to the south)
          • Note: The GPS coordinates that we are using for East Peru have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for East Peru
          • East Peru is located in Oxford County
        • Dickvale
          (15 miles [24.1 km] to the south)
          • Note: We haven't been able to verify our GPS coordinates for Dickvale. Although the coordinates have been estimated, they should be in the vicinity.<4>
          • Jump to our Gazetteer entry for Dickvale
          • Dickvale is located in Oxford County
          • Google driving directions:
          • From your current location to Dickvale
          • From Weld to Dickvale
        • Worthley Pond
          (15 miles [24.1 km] to the south)
          • Note: The GPS coordinates that we are using for Worthley Pond have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Worthley Pond
          • Worthley Pond is located in Oxford County
        • East Andover
          (15 miles [24.1 km] to the west)
          • Note: The GPS coordinates that we are using for East Andover have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for East Andover
          • East Andover is located in Oxford County
        • Canton Point
          (16 miles [25.7 km] to the south)
          • Note: We haven't been able to verify our GPS coordinates for Canton Point. Although the coordinates have been estimated, they should be in the vicinity.<4>
          • Jump to our Gazetteer entry for Canton Point
          • Canton Point is located in Oxford County
          • Google driving directions:
          • From your current location to Canton Point
          • From Weld to Canton Point
        • Rumford Center
          (16 miles [25.7 km] to the southwest)
        • Andover
          (16 miles [25.7 km] to the west)
          • Note: The GPS coordinates that we are using for Andover have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Andover
          • Andover is located in Oxford County
          • Population from the 2020 Census: 838 people
          • Jump to TripAdvisor's Tourism page for Andover <5>
        • Gilbertville
          (17 miles [27.4 km] to the south)
          • Note: We haven't been able to verify our GPS coordinates for Gilbertville. Although the coordinates have been estimated, they should be in the vicinity.<4>
          • Jump to our Gazetteer entry for Gilbertville
          • Gilbertville is located in Oxford County
          • Google driving directions:
          • From your current location to Gilbertville
          • From Weld to Gilbertville
        • Meadowview
          (17 miles [27.4 km] to the southeast)
          • Note: The GPS coordinates that we are using for Meadowview have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Meadowview
          • Meadowview is located in Oxford County
        • South Andover
          (17 miles [27.4 km] to the southwest)
          • Note: The GPS coordinates that we are using for South Andover have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for South Andover
          • South Andover is located in Oxford County
        • Canton
          (18 miles [29 km] to the south)
          • Note: The GPS coordinates that we are using for Canton have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Canton
          • Canton is located in Oxford County
          • Population from the 2020 Census: 1,097 people
        • Abbotts Mill
          (18 miles [29 km] to the southwest)
          • Note: The GPS coordinates that we are using for Abbotts Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Abbotts Mill
          • Abbotts Mill is located in Oxford County
        • Rumford Corner
          (18 miles [29 km] to the southwest)
          • Note: The GPS coordinates that we are using for Rumford Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Rumford Corner
          • Rumford Corner is located in Oxford County
        • Rumford Point
          (18 miles [29 km] to the southwest)
          • Note: The GPS coordinates that we are using for Rumford Point have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Rumford Point
          • Rumford Point is located in Oxford County
          • Jump to TripAdvisor's Tourism page for Rumford Point <5>
        • East Milton
          (19 miles [30.6 km] to the southwest)
          • Note: The GPS coordinates that we are using for East Milton have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for East Milton
          • East Milton is located in Oxford County
        • Hanover
          (19 miles [30.6 km] to the southwest)
          • Note: The GPS coordinates that we are using for Hanover have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Hanover
          • Hanover is located in Oxford County
          • Population from the 2020 Census: 261 people
          • Jump to TripAdvisor's Tourism page for Hanover <5>
        • Redding
          (20 miles [32.2 km] to the south)
          • Note: The GPS coordinates that we are using for Redding have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Redding
          • Redding is located in Oxford County
        • Milton
          (20 miles [32.2 km] to the southwest)
          • Note: The GPS coordinates that we are using for Milton have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Milton
          • Milton is located in Oxford County
        • Sumner
          (21 miles [33.8 km] to the south)
          • Note: We haven't been able to verify our GPS coordinates for Sumner. Although the coordinates have been estimated, they should be in the vicinity.<4>
          • Jump to our Gazetteer entry for Sumner
          • Sumner is located in Oxford County
          • Population from the 2020 Census: 920 people
          • Jump to TripAdvisor's Tourism page for Sumner <5>
          • Google driving directions:
          • From your current location to Sumner
          • From Weld to Sumner
        • East Bethel
          (21 miles [33.8 km] to the southwest)
          • Note: The GPS coordinates that we are using for East Bethel have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for East Bethel
          • East Bethel is located in Oxford County
        • South Arm
          (21 miles [33.8 km] to the west)
          • Note: The GPS coordinates that we are using for South Arm have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for South Arm
          • South Arm is located in Oxford County
        • Hartford
          (22 miles [35.4 km] to the south)
          • Note: The GPS coordinates that we are using for Hartford have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Hartford
          • Hartford is located in Oxford County
          • Population from the 2020 Census: 1,229 people
        • Woodstock
          (22 miles [35.4 km] to the south)
          • Note: The GPS coordinates that we are using for Woodstock have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Woodstock
          • Woodstock is located in Oxford County
          • Population from the 2020 Census: 1,308 people
          • Jump to TripAdvisor's Tourism page for Woodstock <5>
        • North Newry
          (22 miles [35.4 km] to the southwest)
          • Note: We haven't been able to verify our GPS coordinates for North Newry. Although the coordinates have been estimated, they should be in the vicinity.<4>
          • Jump to our Gazetteer entry for North Newry
          • North Newry is located in Oxford County
          • Google driving directions:
          • From your current location to North Newry
          • From Weld to North Newry
        • North Woodstock
          (22 miles [35.4 km] to the southwest)
        • East Sumner
          (23 miles [37 km] to the south)
        • West Sumner
          (23 miles [37 km] to the south)
          • Note: The GPS coordinates that we are using for West Sumner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for West Sumner
          • West Sumner is located in Oxford County
        • Newry
          (23 miles [37 km] to the southwest)
        • South Woodstock
          (24 miles [38.6 km] to the south)
          • Note: The GPS coordinates that we are using for South Woodstock have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for South Woodstock
          • South Woodstock is located in Oxford County
        • Bryant Pond
          (24 miles [38.6 km] to the southwest)
        • Locke Mills
          (24 miles [38.6 km] to the southwest)
          • Note: The GPS coordinates that we are using for Locke Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Locke Mills
          • Locke Mills is located in Oxford County
          • Jump to TripAdvisor's Tourism page for Locke Mills <5>
        • Middle Intervale
          (24 miles [38.6 km] to the southwest)
          • Note: The GPS coordinates that we are using for Middle Intervale have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Middle Intervale
          • Middle Intervale is located in Oxford County
        • Bald Mountain
          (25 miles [40.2 km] to the northwest)
          • Note: The GPS coordinates that we are using for Bald Mountain have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Bald Mountain
          • Bald Mountain is located in Oxford County
        • Upper Dam
          (25 miles [40.2 km] to the northwest)
        • North Paris
          (25 miles [40.2 km] to the south)
          • Note: The GPS coordinates that we are using for North Paris have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Paris
          • North Paris is located in Oxford County
        • Middle Dam
          (25 miles [40.2 km] to the west)
          • Note: We haven't been able to verify our GPS coordinates for Middle Dam. Although the coordinates have been estimated, they should be in the vicinity.<4>
          • Jump to our Gazetteer entry for Middle Dam
          • Middle Dam is located in Oxford County
          • Google driving directions:
          • From your current location to Middle Dam
          • From Weld to Middle Dam
        • North Buckfield
          (26 miles [41.8 km] to the south)
          • Note: The GPS coordinates that we are using for North Buckfield have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Buckfield
          • North Buckfield is located in Oxford County
        • Trap Corner
          (26 miles [41.8 km] to the south)
          • Note: The GPS coordinates that we are using for Trap Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Trap Corner
          • Trap Corner is located in Oxford County
        • West Paris
          (26 miles [41.8 km] to the south)
        • Greenville
          (26 miles [41.8 km] to the southwest)
        • Mayville
          (26 miles [41.8 km] to the southwest)
        • North Bethel
          (26 miles [41.8 km] to the southwest)
          • Note: The GPS coordinates that we are using for North Bethel have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Bethel
          • North Bethel is located in Oxford County
        • Bethel
          (27 miles [43.5 km] to the southwest)
        • Ketchum
          (27 miles [43.5 km] to the southwest)
          • Note: The GPS coordinates that we are using for Ketchum have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Ketchum
          • Ketchum is located in Oxford County
        • Buckfield
          (28 miles [45.1 km] to the south)
        • East Buckfield
          (28 miles [45.1 km] to the south)
          • Note: The GPS coordinates that we are using for East Buckfield have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for East Buckfield
          • East Buckfield is located in Oxford County
        • Greenwood
          (28 miles [45.1 km] to the southwest)
        • Northwest Bethel
          (28 miles [45.1 km] to the southwest)
          • Note: The GPS coordinates that we are using for Northwest Bethel have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Northwest Bethel
          • Northwest Bethel is located in Oxford County
        • Magalloway Plantation
          (28 miles [45.1 km] to the west)
          • Note: The GPS coordinates that we are using for Magalloway Plantation have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Magalloway Plantation
          • Magalloway Plantation is located in Oxford County
          • Population from the 2020 Census: 45 people
        • Upton
          (28 miles [45.1 km] to the west)
          • Note: The GPS coordinates that we are using for Upton have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Upton
          • Upton is located in Oxford County
          • Population from the 2020 Census: 110 people
          • Jump to TripAdvisor's Tourism page for Upton <5>
        • Pleasant Island
          (29 miles [46.7 km] to the northwest)
          • Note: The GPS coordinates that we are using for Pleasant Island have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Pleasant Island
          • Pleasant Island is located in Oxford County
        • West Bethel
          (29 miles [46.7 km] to the southwest)
          • Note: The GPS coordinates that we are using for West Bethel have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for West Bethel
          • West Bethel is located in Oxford County
        • Willis Mill
          (29 miles [46.7 km] to the southwest)
          • Note: The GPS coordinates that we are using for Willis Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Willis Mill
          • Willis Mill is located in Oxford County
        • Paris
          (30 miles [48.3 km] to the south)
          • Note: The GPS coordinates that we are using for Paris have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Paris
          • Paris is located in Oxford County
          • Population from the 2020 Census: 5,162 people
  • Somerset County
    • County Seat for Somerset:   Skowhegan
    • Note: The Canadian Province of Quebec lies to the north
    • Genealogy Websites   ...
    • Nearest Communities to Weld   ...
      • These communities are listed by their distance from Weld.
      • New Portland
        (20 miles [32.2 km] to the northeast)
      • Starks
        (22 miles [35.4 km] to the east)
        • Note: The GPS coordinates that we are using for Starks have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Starks
        • Starks is located in Somerset County
        • Population from the 2020 Census: 638 people
      • Dane Corner
        (23 miles [37 km] to the east)
        • Note: The GPS coordinates that we are using for Dane Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Dane Corner
        • Dane Corner is located in Somerset County
      • Mercer
        (23 miles [37 km] to the east)
      • Pease Corner
        (23 miles [37 km] to the east)
        • Note: The GPS coordinates that we are using for Pease Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Pease Corner
        • Pease Corner is located in Somerset County
      • Witham Corner
        (23 miles [37 km] to the east)
        • Note: The GPS coordinates that we are using for Witham Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Witham Corner
        • Witham Corner is located in Somerset County
      • East New Portland
        (23 miles [37 km] to the northeast)
      • North New Portland
        (24 miles [38.6 km] to the northeast)
        • Note: The GPS coordinates that we are using for North New Portland have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for North New Portland
        • North New Portland is located in Somerset County
        • Jump to TripAdvisor's Tourism page for North New Portland <5>
      • East Mercer
        (25 miles [40.2 km] to the east)
        • Note: The GPS coordinates that we are using for East Mercer have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for East Mercer
        • East Mercer is located in Somerset County
      • Anson
        (26 miles [41.8 km] to the east)
      • Sandy River
        (26 miles [41.8 km] to the east)
        • Note: The GPS coordinates that we are using for Sandy River have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Sandy River
        • Sandy River is located in Somerset County
      • Madison
        (27 miles [43.5 km] to the east)
        • Note: The GPS coordinates that we are using for Madison have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Madison
        • Madison is located in Somerset County
        • Population from the 2020 Census: 4,696 people
        • Jump to TripAdvisor's Tourism page for Madison <5>
      • Continue List   (7 more) ...
        • Lexington
          (27 miles [43.5 km] to the northeast)
          • Note: The GPS coordinates that we are using for Lexington have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Lexington
          • Lexington is located in Somerset County
        • North Anson
          (27 miles [43.5 km] to the northeast)
          • Note: The GPS coordinates that we are using for North Anson have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Anson
          • North Anson is located in Somerset County
          • Jump to TripAdvisor's Tourism page for North Anson <5>
        • Barron Corner
          (29 miles [46.7 km] to the east)
        • Ellis Corner
          (29 miles [46.7 km] to the east)
          • Note: The GPS coordinates that we are using for Ellis Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Ellis Corner
          • Ellis Corner is located in Somerset County
        • Smithfield
          (29 miles [46.7 km] to the east)
          • Note: The GPS coordinates that we are using for Smithfield have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Smithfield
          • Smithfield is located in Somerset County
          • Population from the 2020 Census: 1,008 people
          • Jump to TripAdvisor's Tourism page for Smithfield <5>
        • Martin Corner
          (30 miles [48.3 km] to the east)
          • Note: The GPS coordinates that we are using for Martin Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Martin Corner
          • Martin Corner is located in Somerset County
        • Norridgewock
          (30 miles [48.3 km] to the east)
          • Note: The GPS coordinates that we are using for Norridgewock have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Norridgewock
          • Norridgewock is located in Somerset County
          • Population from the 2020 Census: 3,227 people
          • Jump to TripAdvisor's Tourism page for Norridgewock <5>

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Weld) to Point B.Our distance measurements begin at a specific point in Weld. The point we use is located at these GPS coordinates - Latitude: 44.6985, Longitude: -70.4202    
<2>Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.

We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.

Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<5>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 20 Mar 2025