RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Maine >> Penobscot County >> Milford >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Maine

The Commemorative Quarter for Maine





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Milford (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Milford. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Milford is located in Penobscot County.

To see how the shape of Maine's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Penobscot County: Aroostook, Hancock, Piscataquis, Somerset, Waldo & Washington.

Below are the counties that are near Milford. For each of these counties, we show a sample of those communities that are closest to Milford:

  • Penobscot County     (The home county of Milford)
    • The following are listed by their distance from Milford, with the one closest to Milford listed first.
    • Old Town
      (Less than 2 miles to the south)
      • Note: The GPS coordinates that we are using for Old Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Old Town
      • Old Town is located in Penobscot County
      • Population from the 2020 Census: 7,404 people
      • Jump to TripAdvisor's Tourism page for Old Town <2>
    • Bradley
      (2 miles [3.2 km] to the south)
    • Stillwater
      (3 miles [4.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Stillwater have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stillwater
      • Stillwater is located in Penobscot County
    • Costigan
      (4 miles [6.4 km] to the north)
      • Note: The GPS coordinates that we are using for Costigan have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Costigan
      • Costigan is located in Penobscot County
    • Orono
      (4 miles [6.4 km] to the south)
      • Note: The GPS coordinates that we are using for Orono have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Orono
      • Orono is located in Penobscot County
      • Population from the 2020 Census: 10,636 people
      • Jump to TripAdvisor's Tourism page for Orono <2>
    • Webster
      (4 miles [6.4 km] to the south)
      • Note: The GPS coordinates that we are using for Webster have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Webster
      • Webster is located in Penobscot County
      • Population from the 2020 Census: 82 people
    • Alton
      (7 miles [11.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Alton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Alton
      • Alton is located in Penobscot County
      • Population from the 2020 Census: 858 people
      • Jump to TripAdvisor's Tourism page for Alton <2>
    • Old Town Landing
      (7 miles [11.3 km] to the west)
      • Note: The GPS coordinates that we are using for Old Town Landing have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Old Town Landing
      • Old Town Landing is located in Penobscot County
    • West Old Town
      (7 miles [11.3 km] to the west)
      • Jump to our Gazetteer entry for West Old Town
      • West Old Town is located in Penobscot County
    • Eddington
      (8 miles [12.9 km] to the south)
    • Veazie
      (8 miles [12.9 km] to the south)
      • Note: The GPS coordinates that we are using for Veazie have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Veazie
      • Veazie is located in Penobscot County
      • Population from the 2020 Census: 1,824 people
      • Jump to TripAdvisor's Tourism page for Veazie <2>
    • Lucky Landing
      (8 miles [12.9 km] to the west)
      • Jump to our Gazetteer entry for Lucky Landing
      • Lucky Landing is located in Penobscot County
  • Hancock County
    • The following are listed by their distance from Milford, with the one closest to Milford listed first.
    • Amherst
      (15 miles [24.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Amherst have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Amherst
      • Amherst is located in Hancock County
      • Population from the 2020 Census: 256 people
    • Aurora
      (16 miles [25.7 km] to the east)
      • Note: The GPS coordinates that we are using for Aurora have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Aurora
      • Aurora is located in Hancock County
      • Population from the 2020 Census: 112 people
      • Jump to TripAdvisor's Tourism page for Aurora <2>
    • Great Pond
      (17 miles [27.4 km] to the east)
      • Note: The GPS coordinates that we are using for Great Pond have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Great Pond
      • Great Pond is located in Hancock County
      • Population from the 2020 Census: 56 people
    • Dedham
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Dedham have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dedham
      • Dedham is located in Hancock County
      • Population from the 2020 Census: 1,666 people
      • Jump to TripAdvisor's Tourism page for Dedham <2>
    • Otis
      (18 miles [29 km] to the southeast)
      • Note: The GPS coordinates that we are using for Otis have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Otis
      • Otis is located in Hancock County
      • Population from the 2020 Census: 659 people
    • Mariaville
      (19 miles [30.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Mariaville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mariaville
      • Mariaville is located in Hancock County
      • Population from the 2020 Census: 540 people
    • Waltham
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Waltham have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Waltham
      • Waltham is located in Hancock County
      • Population from the 2020 Census: 340 people
    • Osborn
      (23 miles [37 km] to the southeast)
      • Note: The GPS coordinates that we are using for Osborn have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Osborn
      • Osborn is located in Hancock County
      • Population from the 2020 Census: 66 people
    • Bucksport Center
      (23 miles [37 km] to the southwest)
      • Jump to our Gazetteer entry for Bucksport Center
      • Bucksport Center is located in Hancock County
    • Bucksport
      (26 miles [41.8 km] to the south)
      • Note: The GPS coordinates that we are using for Bucksport have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bucksport
      • Bucksport is located in Hancock County
      • Population from the 2020 Census: 4,916 people
      • Jump to TripAdvisor's Tourism page for Bucksport <2>
    • East Orland
      (26 miles [41.8 km] to the south)
      • Note: The GPS coordinates that we are using for East Orland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for East Orland
      • East Orland is located in Hancock County
      • Jump to TripAdvisor's Tourism page for East Orland <2>
    • Eastbrook
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Eastbrook have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Eastbrook
      • Eastbrook is located in Hancock County
      • Population from the 2020 Census: 416 people
      • Jump to TripAdvisor's Tourism page for Eastbrook <2>
  • Piscataquis County
    • The following are listed by their distance from Milford, with the one closest to Milford listed first.
    • Medford Center
      (22 miles [35.4 km] to the northwest)
      • Jump to our Gazetteer entry for Medford Center
      • Medford Center is located in Piscataquis County
    • Atkinson
      (24 miles [38.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Atkinson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Atkinson
      • Atkinson is located in Piscataquis County
      • Population from the 2020 Census: 311 people
    • Atkinson Mills
      (25 miles [40.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Atkinson Mills have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Atkinson Mills
      • Atkinson Mills is located in Piscataquis County
    • Medford
      (25 miles [40.2 km] to the northwest)
      • Jump to our Gazetteer entry for Medford
      • Medford is located in Piscataquis County
      • Population from the 2020 Census: 245 people
    • Milo
      (26 miles [41.8 km] to the northwest)
      • Jump to our Gazetteer entry for Milo
      • Milo is located in Piscataquis County
      • Population from the 2020 Census: 2,314 people
      • Jump to TripAdvisor's Tourism page for Milo <2>
    • South Dover
      (27 miles [43.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for South Dover have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for South Dover
      • South Dover is located in Piscataquis County
    • Dover South Mills
      (28 miles [45.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Dover South Mills have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dover South Mills
      • Dover South Mills is located in Piscataquis County
    • Adams
      (29 miles [46.7 km] to the northwest)
      • Jump to our Gazetteer entry for Adams
      • Adams is located in Piscataquis County
  • Waldo County
    • The following are listed by their distance from Milford, with the one closest to Milford listed first.
    • North Winterport
      (21 miles [33.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for North Winterport have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for North Winterport
      • North Winterport is located in Waldo County
    • Winterport
      (23 miles [37 km] to the southwest)
      • Note: The GPS coordinates that we are using for Winterport have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Winterport
      • Winterport is located in Waldo County
      • Population from the 2020 Census: 4,028 people
      • Jump to TripAdvisor's Tourism page for Winterport <2>
    • Frankfort
      (25 miles [40.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Frankfort have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Frankfort
      • Frankfort is located in Waldo County
      • Population from the 2020 Census: 1,196 people
      • Jump to TripAdvisor's Tourism page for Frankfort <2>
    • Prospect Ferry
      (27 miles [43.5 km] to the south)
      • Jump to our Gazetteer entry for Prospect Ferry
      • Prospect Ferry is located in Waldo County
    • Prospect
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Prospect have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Prospect
      • Prospect is located in Waldo County
      • Population from the 2020 Census: 750 people
      • Jump to TripAdvisor's Tourism page for Prospect <2>
    • Monroe
      (29 miles [46.7 km] to the southwest)
      • Jump to our Gazetteer entry for Monroe
      • Monroe is located in Waldo County
      • Population from the 2020 Census: 948 people
    • Sandy Point
      (30 miles [48.3 km] to the south)
      • Note: The GPS coordinates that we are using for Sandy Point have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sandy Point
      • Sandy Point is located in Waldo County
      • Jump to TripAdvisor's Tourism page for Sandy Point <2>
    • Monroe Center
      (30 miles [48.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Monroe Center have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Monroe Center
      • Monroe Center is located in Waldo County
  • Washington County
    • Beddington
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for Beddington have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beddington
      • Beddington is located in Washington County
      • Population from the 2020 Census: 48 people
      • Jump to TripAdvisor's Tourism page for Beddington <2>

For an expanded list of the communities that are closest to Milford, see our County-by-County Page for Milford.

Newspapers Published in Milford ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 101 newspapers that have been published in the area around Milford.

Although we're unaware of any newspapers that were published in the immediate area of Milford, there are papers which were published within 23 miles [37 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Milford.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Milford:

Cemeteries Near Milford ...

Below are cemeteries that are in the vicinity of Milford.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Milford covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Milford, with the one closest to Milford listed first.

  • Tribal Cemetery
    (Less than 2 miles to the north)
  • Milford Cemetery
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for the Milford Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Milford Cemetery
  • Forest Hill Cemetery
    (Less than 2 miles to the south)
  • Lawndale Cemetery
    (2 miles [3.2 km] to the southwest)
  • Woodlawn Cemetery
    (2 miles [3.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Woodlawn Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Woodlawn Cemetery
  • St. Joseph Cemetery
    (2 miles [3.2 km] to the south)
  • Riverside Cemetery
    (3 miles [4.8 km] to the southwest)
  • RNOP Cemetery
    (3 miles [4.8 km] to the south)
    • Note: The GPS coordinates that we are using for the RNOP Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the RNOP Cemetery
  • Cedarvale Cemetery
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for the Cedarvale Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Cedarvale Cemetery
  • North Eddington Cemetery
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for the North Eddington Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the North Eddington Cemetery
  • Cardville Cemetery
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Cardville Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Cardville Cemetery
  • Alton Cemetery
    (7 miles [11.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Alton Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Alton Cemetery
  • Continue List   (157 more) ...
    • Fairview Cemetery
      (8 miles [12.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for the Fairview Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Fairview Cemetery
    • Meadowbrook Cemetery
      (8 miles [12.9 km] to the south)
      • Note: The GPS coordinates that we are using for the Meadowbrook Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Meadowbrook Cemetery
    • Lakeview Cemetery
      (9 miles [14.5 km] to the west)

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that Milford had a population of 276 people in 1895 with a post office and railroad service. In 2020, Milford had a population of 2,973 people.

These communities are listed based on their distance from Milford, with the one closest to Milford listed first.

  • Old Town
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for Old Town have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Old Town
    • Old Town is located in Penobscot County
    • Population from the 2020 Census: 7,404 people
    • Jump to TripAdvisor's Tourism page for Old Town <2>
  • Great Works
    (2 miles [3.2 km] to the south)
    • Note: The GPS coordinates that we are using for Great Works have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Great Works
    • Great Works is located in Penobscot County
  • Bradley
    (2 miles [3.2 km] to the south)
  • Pea Cove
    (3 miles [4.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Pea Cove have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pea Cove
    • Pea Cove is located in Penobscot County
  • Orono
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for Orono have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Orono
    • Orono is located in Penobscot County
    • Population from the 2020 Census: 10,636 people
    • Jump to TripAdvisor's Tourism page for Orono <2>
  • Webster
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for Webster have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Webster
    • Webster is located in Penobscot County
    • Population from the 2020 Census: 82 people
  • Costigan
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for Costigan have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Costigan
    • Costigan is located in Penobscot County
  • Basin Mills
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Basin Mills have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Basin Mills
    • Basin Mills is located in Penobscot County
  • Argyle
    (7 miles [11.3 km] to the north)
    • Note: The GPS coordinates that we are using for Argyle have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Argyle
    • Argyle is located in Penobscot County
  • Cardville
    (7 miles [11.3 km] to the north)
    • Note: The GPS coordinates that we are using for Cardville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cardville
    • Cardville is located in Penobscot County
  • Alton
    (7 miles [11.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Alton have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Alton
    • Alton is located in Penobscot County
    • Population from the 2020 Census: 858 people
    • Jump to TripAdvisor's Tourism page for Alton <2>
  • West Old Town
    (7 miles [11.3 km] to the west)
    • Jump to our Gazetteer entry for West Old Town
    • West Old Town is located in Penobscot County
  • Continue List   (15 more) ...
    • Veazie
      (8 miles [12.9 km] to the south)
      • Note: The GPS coordinates that we are using for Veazie have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Veazie
      • Veazie is located in Penobscot County
      • Population from the 2020 Census: 1,824 people
      • Jump to TripAdvisor's Tourism page for Veazie <2>
    • Eddington
      (8 miles [12.9 km] to the south)
    • Greenbush
      (9 miles [14.5 km] to the north)
      • Note: The GPS coordinates that we are using for Greenbush have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Greenbush
      • Greenbush is located in Penobscot County
      • Population from the 2020 Census: 1,519 people

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Milford. See our List of 1890's Communities around Milford.

Unfortunately, we don't know of a website for Milford. If you can help, please contact us through our Feedback Page.

The official website for State of Maine: https://www.maine.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Milford) to Point B.Our distance measurements begin at a specific point in Milford. The point we use is located at these GPS coordinates - Latitude: 44.9462, Longitude: -68.6439       In this case, the coordinates for Milford have been provided by the Geographic Names Information System (GNIS).
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Milford, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024