Nearest Communities to Lamb Place,
Listed County-By-County
The purpose of this page is to identify those communities that are closest to Lamb Place, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Lamb Place:
We have great-grandparents who lived in a small community in the southeast corner of their home county. During their lives, most doctors and hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.
When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.
Keep in mind that when we give a distance, it's a 'straight-line' distance.<1>
If you're researching your genealogy, we hope that the following information helps.
Lamb Place is located in Washington County.
The following 3 counties adjoin and form the boundaries of Washington County: Aroostook, Hancock & Penobscot.
Our Gazetteer shows that there are 68 communities within 40 miles [64.4 km]<1> of Lamb Place. Of these communities, 4 are located in counties other than Washington County.
We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.
After starting with the home county for Lamb Place (which is Washington County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Lamb Place
For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.
- Washington County (where Lamb Place resides)
- County Seat for Washington: Machias
- Note: The Atlantic Ocean lies to the south
- Genealogy Websites ...
- From Cyndi's List:
- State of Maine
- Washington County
- From Family Search:
- State of Maine
- Washington County
- From Genealogy Trails:
- State of Maine
- Washington County
- Nearest Communities to Lamb Place ...
- These communities are listed by their distance from Lamb Place.
- Kelleyland
(2 miles [3.2 km] to the northeast)- Note: The GPS coordinates that we are using for Kelleyland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kelleyland
- Kelleyland is located in Washington County
- Princeton
(3 miles [4.8 km] to the southwest)- Note: The GPS coordinates that we are using for Princeton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Princeton
- Princeton is located in Washington County
- Population from the 2020 Census: 799 people
- Jump to TripAdvisor's Tourism page for Princeton <4>
- Peter Dana Point
(5 miles [8 km] to the southwest)- Note: The GPS coordinates that we are using for Peter Dana Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peter Dana Point
- Peter Dana Point is located in Washington County
- West Princeton
(5 miles [8 km] to the southwest)- Note: The GPS coordinates that we are using for West Princeton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Princeton
- West Princeton is located in Washington County
- Baileyville
(6 miles [9.7 km] to the southeast)- Note: The GPS coordinates that we are using for Baileyville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Baileyville
- Baileyville is located in Washington County
- Population from the 2020 Census: 1,456 people
- Jump to TripAdvisor's Tourism page for Baileyville <4>
- South Princeton
(7 miles [11.3 km] to the south)- Note: The GPS coordinates that we are using for South Princeton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Princeton
- South Princeton is located in Washington County
- Woodland Junction
(7 miles [11.3 km] to the southeast)- Note: The GPS coordinates that we are using for Woodland Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodland Junction
- Woodland Junction is located in Washington County
- Woodland
(8 miles [12.9 km] to the southeast) - Waite
(9 miles [14.5 km] to the northwest)- Jump to our Gazetteer entry for Waite
- Waite is located in Washington County
- Population from the 2020 Census: 96 people
- Bingo
(10 miles [16.1 km] to the northwest) - Grand Lake Stream Plantation
(10 miles [16.1 km] to the west)- Note: The GPS coordinates that we are using for Grand Lake Stream Plantation have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grand Lake Stream Plantation
- Grand Lake Stream Plantation is located in Washington County
- Population from the 2020 Census: 105 people
- Alexander
(11 miles [17.7 km] to the south)- Note: The GPS coordinates that we are using for Alexander have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alexander
- Alexander is located in Washington County
- Population from the 2020 Census: 486 people
- Jump to TripAdvisor's Tourism page for Alexander <4>
- Continue List (52 more) ...
- Greenlaw Chopping Landing
(11 miles [17.7 km] to the southwest)- Note: The GPS coordinates that we are using for Greenlaw Chopping Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenlaw Chopping Landing
- Greenlaw Chopping Landing is located in Washington County
- Red Beach Landing
(11 miles [17.7 km] to the southwest)- Note: The GPS coordinates that we are using for Red Beach Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Beach Landing
- Red Beach Landing is located in Washington County
- Milltown
(12 miles [19.3 km] to the southeast) - Gould Landing
(12 miles [19.3 km] to the southwest)- Note: The GPS coordinates that we are using for Gould Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gould Landing
- Gould Landing is located in Washington County
- Talmadge
(13 miles [20.9 km] to the northwest) - Cedar
(13 miles [20.9 km] to the south) - Crawford
(13 miles [20.9 km] to the south) - Baring
(13 miles [20.9 km] to the southeast)- Jump to our Gazetteer entry for Baring
- Baring is located in Washington County
- Population from the 2020 Census: 239 people
- Baring has also been known as:
- Baring Plantation
- Saint Croix Junction
(13 miles [20.9 km] to the southeast)- Note: The GPS coordinates that we are using for Saint Croix Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Croix Junction
- Saint Croix Junction is located in Washington County
- Bear Trap Landing
(13 miles [20.9 km] to the west)- Note: The GPS coordinates that we are using for Bear Trap Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bear Trap Landing
- Bear Trap Landing is located in Washington County
- Grand Lake Stream
(13 miles [20.9 km] to the west)- Note: The GPS coordinates that we are using for Grand Lake Stream have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grand Lake Stream
- Grand Lake Stream is located in Washington County
- Jump to TripAdvisor's Tourism page for Grand Lake Stream <4>
- Topsfield
(15 miles [24.1 km] to the northwest)- Jump to our Gazetteer entry for Topsfield
- Topsfield is located in Washington County
- Population from the 2020 Census: 227 people
- Whitlocks Mill
(15 miles [24.1 km] to the southeast)- Note: The GPS coordinates that we are using for Whitlocks Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whitlocks Mill
- Whitlocks Mill is located in Washington County
- Codyville
(16 miles [25.7 km] to the northwest)- Note: The GPS coordinates that we are using for Codyville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Codyville
- Codyville is located in Washington County
- Population from the 2020 Census: 23 people
- Codyville has also been known as:
- Codyville Plantation
- Calais
(16 miles [25.7 km] to the southeast)- Note: The GPS coordinates that we are using for Calais have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calais
- Calais is located in Washington County
- Population from the 2020 Census: 3,026 people
- Jump to TripAdvisor's Tourism page for Calais <4>
- Meddybemps
(16 miles [25.7 km] to the southeast)- Jump to our Gazetteer entry for Meddybemps
- Meddybemps is located in Washington County
- Population from the 2020 Census: 149 people
- Jump to TripAdvisor's Tourism page for Meddybemps <4>
- Grove
(17 miles [27.4 km] to the south) - Indian Landing
(17 miles [27.4 km] to the west)- Note: The GPS coordinates that we are using for Indian Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Indian Landing
- Indian Landing is located in Washington County
- Jumbo Landing
(17 miles [27.4 km] to the west)- Note: The GPS coordinates that we are using for Jumbo Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jumbo Landing
- Jumbo Landing is located in Washington County
- Elsemore Landing
(18 miles [29 km] to the west)- Note: The GPS coordinates that we are using for Elsemore Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elsemore Landing
- Elsemore Landing is located in Washington County
- Lambert Lake
(20 miles [32.2 km] to the north)- Note: The GPS coordinates that we are using for Lambert Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lambert Lake
- Lambert Lake is located in Washington County
- Cooper
(20 miles [32.2 km] to the south) - Blanchard Corner
(20 miles [32.2 km] to the southeast)- Note: The GPS coordinates that we are using for Blanchard Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blanchard Corner
- Blanchard Corner is located in Washington County
- Charlotte
(20 miles [32.2 km] to the southeast) - Pine Corner
(20 miles [32.2 km] to the southeast)- Note: The GPS coordinates that we are using for Pine Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pine Corner
- Pine Corner is located in Washington County
- Red Beach
(20 miles [32.2 km] to the southeast)- Jump to our Gazetteer entry for Red Beach
- Red Beach is located in Washington County
- Tomah
(21 miles [33.8 km] to the north) - Wesley
(21 miles [33.8 km] to the south)- Note: The GPS coordinates that we are using for Wesley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wesley
- Wesley is located in Washington County
- Population from the 2020 Census: 94 people
- Jump to TripAdvisor's Tourism page for Wesley <4>
- Vanceboro
(22 miles [35.4 km] to the north)- Jump to our Gazetteer entry for Vanceboro
- Vanceboro is located in Washington County
- Population from the 2020 Census: 134 people
- Brookton
(22 miles [35.4 km] to the northwest)- Jump to our Gazetteer entry for Brookton
- Brookton is located in Washington County
- Jump to TripAdvisor's Tourism page for Brookton <4>
- Ayers
(23 miles [37 km] to the southeast) - Robbinston
(23 miles [37 km] to the southeast)- Jump to our Gazetteer entry for Robbinston
- Robbinston is located in Washington County
- Population from the 2020 Census: 571 people
- Jump to TripAdvisor's Tourism page for Robbinston <4>
- South Robbinston
(23 miles [37 km] to the southeast)- Note: The GPS coordinates that we are using for South Robbinston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Robbinston
- South Robbinston is located in Washington County
- Fletcher Field
(23 miles [37 km] to the southwest)- Note: The GPS coordinates that we are using for Fletcher Field have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fletcher Field
- Fletcher Field is located in Washington County
- The Pines
(23 miles [37 km] to the west) - Forest
(24 miles [38.6 km] to the northwest) - North Perry
(25 miles [40.2 km] to the southeast)- Jump to our Gazetteer entry for North Perry
- North Perry is located in Washington County
- Imnarkuan ‑ Historic
(26 miles [41.8 km] to the southeast) - Lower Dennysville
(26 miles [41.8 km] to the southeast)- Jump to our Gazetteer entry for Lower Dennysville
- Lower Dennysville is located in Washington County
- Pembroke
(26 miles [41.8 km] to the southeast)- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Washington County
- Population from the 2020 Census: 796 people
- Jump to TripAdvisor's Tourism page for Pembroke <4>
- West Pembroke
(26 miles [41.8 km] to the southeast)- Jump to our Gazetteer entry for West Pembroke
- West Pembroke is located in Washington County
- Marion
(27 miles [43.5 km] to the south) - Mud Landing
(27 miles [43.5 km] to the south)- Note: The GPS coordinates that we are using for Mud Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mud Landing
- Mud Landing is located in Washington County
- Dennysville
(27 miles [43.5 km] to the southeast)- Note: The GPS coordinates that we are using for Dennysville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dennysville
- Dennysville is located in Washington County
- Population from the 2020 Census: 331 people
- Jump to TripAdvisor's Tourism page for Dennysville <4>
- Eaton
(28 miles [45.1 km] to the northwest) - Perry
(28 miles [45.1 km] to the southeast) - Forest City Landing
(29 miles [46.7 km] to the north)- Note: The GPS coordinates that we are using for Forest City Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forest City Landing
- Forest City Landing is located in Washington County
- Northfield
(29 miles [46.7 km] to the south)- Note: The GPS coordinates that we are using for Northfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Northfield
- Northfield is located in Washington County
- Population from the 2020 Census: 142 people
- Forest City
(30 miles [48.3 km] to the north)- Note: The GPS coordinates that we are using for Forest City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forest City
- Forest City is located in Washington County
- Mattimo Place
(30 miles [48.3 km] to the south)- Note: The GPS coordinates that we are using for Mattimo Place have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mattimo Place
- Mattimo Place is located in Washington County
- Rivers End
(30 miles [48.3 km] to the south)- Note: The GPS coordinates that we are using for Rivers End have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rivers End
- Rivers End is located in Washington County
- Pleasant Point
(30 miles [48.3 km] to the southeast)- Note: The GPS coordinates that we are using for Pleasant Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Point
- Pleasant Point is located in Washington County
- Greenlaw Chopping Landing
- Penobscot County
- County Seat for Penobscot: Bangor
- Genealogy Websites ...
- From Cyndi's List:
- State of Maine
- Penobscot County
- From Family Search:
- State of Maine
- Penobscot County
- From Genealogy Trails:
- State of Maine
- Penobscot County
- Nearest Communities to Lamb Place ...
- These communities are listed by their distance from Lamb Place.
- Carroll
(27 miles [43.5 km] to the northwest)- Jump to our Gazetteer entry for Carroll
- Carroll is located in Penobscot County
- Population from the 2020 Census: 145 people
- Carroll has also been known as:
- Carroll Plantation
- Lakeville
(28 miles [45.1 km] to the west) - South Springfield
(28 miles [45.1 km] to the west)- Note: The GPS coordinates that we are using for South Springfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Springfield
- South Springfield is located in Penobscot County
- Drake Place ‑ Historic
(30 miles [48.3 km] to the west)- Note: The GPS coordinates that we are using for Drake Place have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Drake Place
- Drake Place is located in Penobscot County
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Lamb Place) to Point B.Our distance measurements begin at a specific point in Lamb Place. The point we use is located at these GPS coordinates - Latitude: 45.2503, Longitude: -67.5228 In this case, the coordinates for Lamb Place have been provided by the Geographic Names Information System (GNIS). |
| <2> | Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking. We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now. Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |