|
Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Parksville (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Parksville. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors and hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Parksville is located in Boyle County.
To see how the shape of Kentucky's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Boyle County: Casey, Garrard, Jessamine, Lincoln, Mercer & Washington.
Below are the counties that are near Parksville. For each of these counties, we show a sample of those communities that are closest to Parksville:
- Boyle County (The home county of Parksville)
- The following are listed by their distance from Parksville, with the one closest to Parksville listed first.
- Wilsonville
(Less than 2 miles to the east)
- Alum Springs
(2 miles [3.2 km] to the east)
- Needmore
(3 miles [4.8 km] to the north)
- Note: The GPS coordinates that we are using for Needmore have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Needmore
- Needmore is located in Boyle County
- Atoka
(3 miles [4.8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Atoka. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Atoka
- Atoka is located in Boyle County
- Google driving directions:
- From your current location to Atoka
- From Parksville to Atoka
- Mitchellsburg
(3 miles [4.8 km] to the west)
- Davis Hill
(4 miles [6.4 km] to the northeast)
- Perryville
(4 miles [6.4 km] to the northwest)
- Brumfield
(4 miles [6.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Brumfield. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Brumfield
- Brumfield is located in Boyle County
- Google driving directions:
- From your current location to Brumfield
- From Parksville to Brumfield
- Junction City
(5 miles [8 km] to the east)
- Forkland
(5 miles [8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Forkland. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Forkland
- Forkland is located in Boyle County
- Google driving directions:
- From your current location to Forkland
- From Parksville to Forkland
- Shelby City
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Shelby City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shelby City
- Shelby City is located in Boyle County
- West Danville
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for West Danville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Danville
- West Danville is located in Boyle County
- Aliceton
(7 miles [11.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Aliceton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Aliceton
- Aliceton is located in Boyle County
- Google driving directions:
- From your current location to Aliceton
- From Parksville to Aliceton
- Adair County
- The following are listed by their distance from Parksville, with the one closest to Parksville listed first.
- Feathersburg
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Feathersburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Feathersburg
- Feathersburg is located in Adair County
- Speck
(25 miles [40.2 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Speck. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Speck
- Speck is located in Adair County
- Google driving directions:
- From your current location to Speck
- From Parksville to Speck
- Barnett Springs
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Barnett Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barnett Springs
- Barnett Springs is located in Adair County
- Casey Creek
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Casey Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Casey Creek
- Casey Creek is located in Adair County
- Pellyton
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Pellyton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pellyton
- Pellyton is located in Adair County
- Knifley
(29 miles [46.7 km] to the southwest)
- Dunbar Hill
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Dunbar Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunbar Hill
- Dunbar Hill is located in Adair County
- Neatsville
(30 miles [48.3 km] to the southwest)
- Anderson County
- The following are listed by their distance from Parksville, with the one closest to Parksville listed first.
- Ashbrook
(24 miles [38.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Ashbrook. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Ashbrook
- Ashbrook is located in Anderson County
- Google driving directions:
- From your current location to Ashbrook
- From Parksville to Ashbrook
- Sinai
(25 miles [40.2 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Sinai. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Sinai
- Sinai is located in Anderson County
- Google driving directions:
- From your current location to Sinai
- From Parksville to Sinai
- McBrayer
(26 miles [41.8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for McBrayer. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for McBrayer
- McBrayer is located in Anderson County
- Google driving directions:
- From your current location to McBrayer
- From Parksville to McBrayer
- Sparrow
(26 miles [41.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Sparrow. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Sparrow
- Sparrow is located in Anderson County
- Google driving directions:
- From your current location to Sparrow
- From Parksville to Sparrow
- Fox Creek
(27 miles [43.5 km] to the north)
- Anderson City
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Anderson City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Anderson City
- Anderson City is located in Anderson County
- Glensboro
(29 miles [46.7 km] to the north)
- Van Buren
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Buren
- Van Buren is located in Anderson County
- Lawrenceburg
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Lawrenceburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lawrenceburg
- Lawrenceburg is located in Anderson County
- Population from the 2020 Census: 11,529 people
- Jump to TripAdvisor's Tourism page for Lawrenceburg <3>
- Tyrone
(30 miles [48.3 km] to the north)
- Casey County
- The following are listed by their distance from Parksville, with the one closest to Parksville listed first.
- Butchertown
(6 miles [9.7 km] to the south)
- Middleburg
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Middleburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middleburg
- Middleburg is located in Casey County
- Yosemite
(17 miles [27.4 km] to the south)
- Liberty
(19 miles [30.6 km] to the south)
- Atterson
(20 miles [32.2 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Atterson. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Atterson
- Atterson is located in Casey County
- Google driving directions:
- From your current location to Atterson
- From Parksville to Atterson
- Cantown
(23 miles [37 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Cantown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Cantown
- Cantown is located in Casey County
- Google driving directions:
- From your current location to Cantown
- From Parksville to Cantown
- Gilpin
(23 miles [37 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Gilpin. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Gilpin
- Gilpin is located in Casey County
- Google driving directions:
- From your current location to Gilpin
- From Parksville to Gilpin
- Creston
(24 miles [38.6 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Creston. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Creston
- Creston is located in Casey County
- Google driving directions:
- From your current location to Creston
- From Parksville to Creston
- Rheber
(24 miles [38.6 km] to the south)
- Evans Ford
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Evans Ford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evans Ford
- Evans Ford is located in Casey County
- Labascus
(25 miles [40.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Labascus. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Labascus
- Labascus is located in Casey County
- Google driving directions:
- From your current location to Labascus
- From Parksville to Labascus
- Rubert Ford
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Rubert Ford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rubert Ford
- Rubert Ford is located in Casey County
- Argyle
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Argyle have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Argyle
- Argyle is located in Casey County
- Garrard County
- The following are listed by their distance from Parksville, with the one closest to Parksville listed first.
- Bryantsville
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Bryantsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bryantsville
- Bryantsville is located in Garrard County
- Jump to TripAdvisor's Tourism page for Bryantsville <3>
- Lancaster
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Lancaster have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lancaster
- Lancaster is located in Garrard County
- Population from the 2020 Census: 3,840 people
- Jump to TripAdvisor's Tourism page for Lancaster <3>
- Hyattsville
(20 miles [32.2 km] to the east)
- Stone
(20 miles [32.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Stone. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Stone
- Stone is located in Garrard County
- Google driving directions:
- From your current location to Stone
- From Parksville to Stone
- Nina
(23 miles [37 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Nina. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Nina
- Nina is located in Garrard County
- Google driving directions:
- From your current location to Nina
- From Parksville to Nina
- Lowell
(25 miles [40.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Lowell. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Lowell
- Lowell is located in Garrard County
- Google driving directions:
- From your current location to Lowell
- From Parksville to Lowell
- Cartersville
(26 miles [41.8 km] to the east)
- Paint Lick
(26 miles [41.8 km] to the east)
- Harlan County
- Rutherford
(26 miles [41.8 km] to the east)
- Jessamine County
- The following are listed by their distance from Parksville, with the one closest to Parksville listed first.
- High Bridge
(18 miles [29 km] to the northeast)
- Hall
(19 miles [30.6 km] to the northeast)
- Little Hickman
(21 miles [33.8 km] to the northeast)
- Wilmore
(22 miles [35.4 km] to the northeast)
- Hanly
(23 miles [37 km] to the northeast)
- Vineyard
(23 miles [37 km] to the northeast)
- Jessamine
(24 miles [38.6 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Jessamine. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Jessamine
- Jessamine is located in Jessamine County
- Google driving directions:
- From your current location to Jessamine
- From Parksville to Jessamine
- Troy
(24 miles [38.6 km] to the northeast)
- Pollard
(25 miles [40.2 km] to the northeast)
- Dixon Town ‑ Historic
(26 miles [41.8 km] to the northeast)
- Mount Lebanon
(26 miles [41.8 km] to the northeast)
- Nicholasville
(26 miles [41.8 km] to the northeast)
- Keene
(27 miles [43.5 km] to the northeast)
- Lincoln County
- The following are listed by their distance from Parksville, with the one closest to Parksville listed first.
- Milledgeville
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Milledgeville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milledgeville
- Milledgeville is located in Lincoln County
- Moreland
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Moreland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moreland
- Moreland is located in Lincoln County
- Hustonville
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Hustonville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hustonville
- Hustonville is located in Lincoln County
- Population from the 2020 Census: 368 people
- Jump to TripAdvisor's Tourism page for Hustonville <3>
- Chicken Bristle
(10 miles [16.1 km] to the southeast)
- Turnersville
(11 miles [17.7 km] to the southeast)
- Blue Lick
(12 miles [19.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Blue Lick. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Blue Lick
- Blue Lick is located in Lincoln County
- Google driving directions:
- From your current location to Blue Lick
- From Parksville to Blue Lick
- Boneyville
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Boneyville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boneyville
- Boneyville is located in Lincoln County
- McKinney
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for McKinney have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McKinney
- McKinney is located in Lincoln County
- Jump to TripAdvisor's Tourism page for McKinney <3>
- Hubble
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Hubble have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hubble
- Hubble is located in Lincoln County
- Stanford
(13 miles [20.9 km] to the east)
- Geneva
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Geneva have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Geneva
- Geneva is located in Lincoln County
- Mount Salem
(13 miles [20.9 km] to the southeast)
- Jumbo
(14 miles [22.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Jumbo. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Jumbo
- Jumbo is located in Lincoln County
- Google driving directions:
- From your current location to Jumbo
- From Parksville to Jumbo
- Madison County
- The following are listed by their distance from Parksville, with the one closest to Parksville listed first.
- Cottonburg
(25 miles [40.2 km] to the east)
- Edenton
(25 miles [40.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Edenton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Edenton
- Edenton is located in Madison County
- Google driving directions:
- From your current location to Edenton
- From Parksville to Edenton
- Kirksville
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Kirksville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kirksville
- Kirksville is located in Madison County
- Round Hill
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Round Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Round Hill
- Round Hill is located in Madison County
- Ruthton
(26 miles [41.8 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Ruthton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Ruthton
- Ruthton is located in Madison County
- Google driving directions:
- From your current location to Ruthton
- From Parksville to Ruthton
- Buggytown
(28 miles [45.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Buggytown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Buggytown
- Buggytown is located in Madison County
- Google driving directions:
- From your current location to Buggytown
- From Parksville to Buggytown
- Happy Landing
(28 miles [45.1 km] to the east)
- Baldwin
(28 miles [45.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Baldwin. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Baldwin
- Baldwin is located in Madison County
- Google driving directions:
- From your current location to Baldwin
- From Parksville to Baldwin
- Newby
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Newby have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newby
- Newby is located in Madison County
- Silver Creek
(29 miles [46.7 km] to the east)
- Wallaceton
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Wallaceton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wallaceton
- Wallaceton is located in Madison County
- Cuzick
(29 miles [46.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Cuzick. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Cuzick
- Cuzick is located in Madison County
- Google driving directions:
- From your current location to Cuzick
- From Parksville to Cuzick
- Duncanon
(30 miles [48.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Duncanon. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Duncanon
- Duncanon is located in Madison County
- Google driving directions:
- From your current location to Duncanon
- From Parksville to Duncanon
- Marion County
- The following are listed by their distance from Parksville, with the one closest to Parksville listed first.
- Gravel Switch
(8 miles [12.9 km] to the west)
- Riley
(11 miles [17.7 km] to the west)
- Penick
(14 miles [22.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Penick. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Penick
- Penick is located in Marion County
- Google driving directions:
- From your current location to Penick
- From Parksville to Penick
- Poplar Corner
(14 miles [22.5 km] to the west)
- Bradfordsville
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Bradfordsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bradfordsville
- Bradfordsville is located in Marion County
- Population from the 2020 Census: 299 people
- Jump to TripAdvisor's Tourism page for Bradfordsville <3>
- Simstown
(15 miles [24.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Simstown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Simstown
- Simstown is located in Marion County
- Google driving directions:
- From your current location to Simstown
- From Parksville to Simstown
- Greenbriar
(19 miles [30.6 km] to the west)
- Lebanon
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Lebanon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lebanon
- Lebanon is located in Marion County
- Population from the 2020 Census: 5,733 people
- Jump to TripAdvisor's Tourism page for Lebanon <3>
- Peck Ford
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Peck Ford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peck Ford
- Peck Ford is located in Marion County
- Salleetown
(20 miles [32.2 km] to the southwest)
- Calvary
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Calvary have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calvary
- Calvary is located in Marion County
- Phillipsburg
(22 miles [35.4 km] to the southwest)
- Belltown
(23 miles [37 km] to the west)
- Mercer County
- The following are listed by their distance from Parksville, with the one closest to Parksville listed first.
- Nevada
(6 miles [9.7 km] to the north)
- Dixville
(8 miles [12.9 km] to the northwest)
- Stewart
(9 miles [14.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Stewart. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Stewart
- Stewart is located in Mercer County
- Google driving directions:
- From your current location to Stewart
- From Parksville to Stewart
- Harrodsburg
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Harrodsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harrodsburg
- Harrodsburg is located in Mercer County
- Population from the 2020 Census: 8,544 people
- Jump to TripAdvisor's Tourism page for Harrodsburg <3>
- Burgin
(12 miles [19.3 km] to the northeast)
- Jackson
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Jackson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jackson
- Jackson is located in Mercer County
- Braxton
(17 miles [27.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Braxton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Braxton
- Braxton is located in Mercer County
- Google driving directions:
- From your current location to Braxton
- From Parksville to Braxton
- McAfee
(17 miles [27.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for McAfee. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for McAfee
- McAfee is located in Mercer County
- Google driving directions:
- From your current location to McAfee
- From Parksville to McAfee
- Duncan
(18 miles [29 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Duncan. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Duncan
- Duncan is located in Mercer County
- Google driving directions:
- From your current location to Duncan
- From Parksville to Duncan
- Mayo
(19 miles [30.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Mayo. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Mayo
- Mayo is located in Mercer County
- Google driving directions:
- From your current location to Mayo
- From Parksville to Mayo
- Tablow
(19 miles [30.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Tablow. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Tablow
- Tablow is located in Mercer County
- Google driving directions:
- From your current location to Tablow
- From Parksville to Tablow
- Vanarsdell
(20 miles [32.2 km] to the north)
- Salvisa
(22 miles [35.4 km] to the north)
- Montgomery County
- Hedgeville
(11 miles [17.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Hedgeville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Hedgeville
- Hedgeville is located in Montgomery County
- Hedgeville has also been known as:
- Hedges
- Google driving directions:
- From your current location to Hedgeville
- From Parksville to Hedgeville
- Nelson County
- The following are listed by their distance from Parksville, with the one closest to Parksville listed first.
- Chaplin
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Chaplin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chaplin
- Chaplin is located in Nelson County
- Jump to TripAdvisor's Tourism page for Chaplin <3>
- Botland
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Botland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Botland
- Botland is located in Nelson County
- Woodlawn
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Woodlawn have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodlawn
- Woodlawn is located in Nelson County
- Pulaski County
- The following are listed by their distance from Parksville, with the one closest to Parksville listed first.
- Eubank
(25 miles [40.2 km] to the southeast)
- Bee Lick
(28 miles [45.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Bee Lick. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Bee Lick
- Bee Lick is located in Pulaski County
- Google driving directions:
- From your current location to Bee Lick
- From Parksville to Bee Lick
- Ansel
(29 miles [46.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Ansel. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Ansel
- Ansel is located in Pulaski County
- Google driving directions:
- From your current location to Ansel
- From Parksville to Ansel
- Rockcastle County
- The following are listed by their distance from Parksville, with the one closest to Parksville listed first.
- Gum Sulphur
(26 miles [41.8 km] to the southeast)
- Ottawa
(28 miles [45.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Ottawa. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Ottawa
- Ottawa is located in Rockcastle County
- Google driving directions:
- From your current location to Ottawa
- From Parksville to Ottawa
- Brodhead
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Brodhead have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brodhead
- Brodhead is located in Rockcastle County
- Population from the 2020 Census: 1,185 people
- Jump to TripAdvisor's Tourism page for Brodhead <3>
- Taylor County
- The following are listed by their distance from Parksville, with the one closest to Parksville listed first.
- Mannsville
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Mannsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mannsville
- Mannsville is located in Taylor County
- Acton
(26 miles [41.8 km] to the southwest)
- Elk Horn
(29 miles [46.7 km] to the southwest)
- Campbellsville
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Campbellsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Campbellsville
- Campbellsville is located in Taylor County
- Population from the 2020 Census: 11,430 people
- Jump to TripAdvisor's Tourism page for Campbellsville <3>
- Saloma
(30 miles [48.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Saloma. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Saloma
- Saloma is located in Taylor County
- Google driving directions:
- From your current location to Saloma
- From Parksville to Saloma
- Washington County
- The following are listed by their distance from Parksville, with the one closest to Parksville listed first.
- Jenkinsville
(12 miles [19.3 km] to the northwest)
- Mackville
(13 miles [20.9 km] to the northwest)
- Thompsonville
(16 miles [25.7 km] to the northwest)
- Springfield
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Springfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springfield
- Springfield is located in Washington County
- Population from the 2020 Census: 2,987 people
- Jump to TripAdvisor's Tourism page for Springfield <3>
- Willisburg
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Willisburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willisburg
- Willisburg is located in Washington County
- Population from the 2020 Census: 282 people
- Jump to TripAdvisor's Tourism page for Willisburg <3>
- Litsey
(20 miles [32.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Litsey. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Litsey
- Litsey is located in Washington County
- Google driving directions:
- From your current location to Litsey
- From Parksville to Litsey
- Sharpsville
(20 miles [32.2 km] to the northwest)
- Seaville
(21 miles [33.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Seaville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Seaville
- Seaville is located in Washington County
- Google driving directions:
- From your current location to Seaville
- From Parksville to Seaville
- Saint Catharine
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Saint Catharine have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Catharine
- Saint Catharine is located in Washington County
- Pulliam
(22 miles [35.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Pulliam. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Pulliam
- Pulliam is located in Washington County
- Google driving directions:
- From your current location to Pulliam
- From Parksville to Pulliam
- Tatham Springs
(22 miles [35.4 km] to the northwest)
- Brush Grove
(23 miles [37 km] to the northwest)
- Mooresville
(24 miles [38.6 km] to the northwest)
- Woodford County
- The following are listed by their distance from Parksville, with the one closest to Parksville listed first.
- Mundys Landing
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for Mundys Landing have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mundys Landing
- Mundys Landing is located in Woodford County
- Nonesuch
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Nonesuch have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nonesuch
- Nonesuch is located in Woodford County
- Mortonsville
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Mortonsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mortonsville
- Mortonsville is located in Woodford County
- Pinckard
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Pinckard have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pinckard
- Pinckard is located in Woodford County
- Milner
(30 miles [48.3 km] to the north)
For an expanded list of the communities that are closest to Parksville, see our County-by-County Page for Parksville.
Cemeteries Near Parksville ...
Below are cemeteries that are in the vicinity of Parksville.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Parksville covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Parksville, with the one closest to Parksville listed first.
- McDonald Center Church Cemetery
(Less than 2 miles to the southeast)
- Wilson Cemetery
(2 miles [3.2 km] to the south)
- Jump to our Gazetteer entry for the Wilson Cemetery
- Note: The GPS coordinates that we are using for the Wilson Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Mitchell Cemetery
(2 miles [3.2 km] to the west)
- Jump to our Gazetteer entry for the Mitchell Cemetery
- Note: The GPS coordinates that we are using for the Mitchell Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Gray Cemetery
(3 miles [4.8 km] to the east)
- Jump to our Gazetteer entry for the Gray Cemetery
- Note: The GPS coordinates that we are using for the Gray Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Clarkson Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the Clarkson Cemetery
- Note: The GPS coordinates that we are using for the Clarkson Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Crews Cemetery
(4 miles [6.4 km] to the southwest)
- Russell Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the Russell Cemetery
- Note: The GPS coordinates that we are using for the Russell Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Roller Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the Roller Cemetery
- Note: The GPS coordinates that we are using for the Roller Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Purdom Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the Purdom Cemetery
- Note: The GPS coordinates that we are using for the Purdom Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Minor Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the Minor Cemetery
- Note: The GPS coordinates that we are using for the Minor Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Whitehouse Cemetery
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for the Whitehouse Cemetery
- Note: The GPS coordinates that we are using for the Whitehouse Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Germantown - St. Patrick Cemetery
(4 miles [6.4 km] to the southeast)
- Continue List (364 more) ...
- Hillcrest Cemetery
(4 miles [6.4 km] to the northwest)
- Jump to our Gazetteer entry for the Hillcrest Cemetery
- Note: The GPS coordinates that we are using for the Hillcrest Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Chambers Cemetery
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for the Chambers Cemetery
- Note: The GPS coordinates that we are using for the Chambers Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Elder Cemetery
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for the Elder Cemetery
- Note: The GPS coordinates that we are using for the Elder Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>
The Rand McNally Atlas shows that Parksville had a population of 160 people in 1895 with a post office and railroad service.
These communities are listed based on their distance from Parksville, with the one closest to Parksville listed first.
- Alum Springs
(2 miles [3.2 km] to the east)
- Atoka
(3 miles [4.8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Atoka. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Atoka
- Atoka is located in Boyle County
- Google driving directions:
- From your current location to Atoka
- From Parksville to Atoka
- Mitchellsburg
(3 miles [4.8 km] to the west)
- Perryville
(4 miles [6.4 km] to the northwest)
- Brumfield
(4 miles [6.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Brumfield. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Brumfield
- Brumfield is located in Boyle County
- Google driving directions:
- From your current location to Brumfield
- From Parksville to Brumfield
- Junction City
(5 miles [8 km] to the east)
- Milledgeville
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Milledgeville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milledgeville
- Milledgeville is located in Lincoln County
- Shelby City
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Shelby City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shelby City
- Shelby City is located in Boyle County
- Nevada
(6 miles [9.7 km] to the north)
- Moreland
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Moreland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moreland
- Moreland is located in Lincoln County
- Danville
(7 miles [11.3 km] to the northeast)
- Aliceton
(7 miles [11.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Aliceton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Aliceton
- Aliceton is located in Boyle County
- Google driving directions:
- From your current location to Aliceton
- From Parksville to Aliceton
- Continue List (17 more) ...
- Gravel Switch
(8 miles [12.9 km] to the west)
- Ellisburg
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Ellisburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ellisburg
- Ellisburg is located in Casey County
- Hustonville
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Hustonville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hustonville
- Hustonville is located in Lincoln County
- Population from the 2020 Census: 368 people
- Jump to TripAdvisor's Tourism page for Hustonville <3>
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Parksville. See our List of 1890's Communities around Parksville.
Newspapers Published in the Vicinity of Parksville ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 89 newspapers that have been published in the area around Parksville.
We have organized these newspapers into two lists:
- A Local Newspaper List - focusing on the papers published in the immediate area of Parksville. There are actually two parts to this list - papers printed in the immediate area of Parksville and those printed in the larger area surrounding Parksville.
- An Extended Newspaper List - a longer list, sorted by paper name and containing those papers published within 22 miles [35.4 km]<4> of Parksville.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Parksville:
- Websites specific to Kentucky
- Pages specific to Boyle County
- Genealogy information for nearby counties
- Adair County
- Anderson County
- Casey County
- Garrard County
- Harlan County
- Jessamine County
- Lincoln County
- Madison County
- Marion County
- Mercer County
- Montgomery County
- Nelson County
- Pulaski County
- Rockcastle County
- Taylor County
- Washington County
- Woodford County
- Cemetery Information and Directories for Kentucky
Off-the-Road Links ...
Unfortunately, we don't know of a website for Parksville. If you can help, please contact us through our Feedback Page. The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Parksville) to Point B.Our distance measurements begin at a specific point in Parksville. The point we use is located at these GPS coordinates - Latitude: 37.5976, Longitude: -84.8923 |
<5> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<6> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Parksville, please let us know so that we can improve our accuracy. |
|
|