|
Nearest Communities to Parksville, Listed County-By-County
The purpose of this page is to identify those communities that are closest to Parksville, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Parksville:
We have great-grandparents who lived in a small community in the northeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.
When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.
Keep in mind that when we give a distance, it's a 'straight-line' distance.<1>
If you're researching your genealogy, we hope that the following information helps.
Parksville is located in Boyle County.
The following 6 counties adjoin and form the boundaries of Boyle County: Casey, Garrard, Jessamine, Lincoln, Mercer & Washington.
Our Gazetteer shows that there are 301 communities within 40 miles [64.4 km]<1> of Parksville. Of these communities, 278 are located in counties other than Boyle County.
We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.
After starting with the home county for Parksville (which is Boyle County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Parksville
For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.
- Boyle County (where Parksville resides)
- County Seat for Boyle: Danville
- Genealogy Websites ...
- Nearest Communities to Parksville ...
- These communities are listed by their distance from Parksville.
- Wilsonville
(Less than 2 miles to the east)
- Alum Springs
(2 miles [3.2 km] to the east)
- Needmore
(3 miles [4.8 km] to the north)
- Note: The GPS coordinates that we are using for Needmore have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Needmore
- Needmore is located in Boyle County
- Atoka
(3 miles [4.8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Atoka. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Atoka
- Atoka is located in Boyle County
- Google driving directions:
- From your current location to Atoka
- From Parksville to Atoka
- Mitchellsburg
(3 miles [4.8 km] to the west)
- Davis Hill
(4 miles [6.4 km] to the northeast)
- Perryville
(4 miles [6.4 km] to the northwest)
- Brumfield
(4 miles [6.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Brumfield. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Brumfield
- Brumfield is located in Boyle County
- Google driving directions:
- From your current location to Brumfield
- From Parksville to Brumfield
- Junction City
(5 miles [8 km] to the east)
- Forkland
(5 miles [8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Forkland. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Forkland
- Forkland is located in Boyle County
- Google driving directions:
- From your current location to Forkland
- From Parksville to Forkland
- Baughman Heights
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Baughman Heights have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Baughman Heights
- Baughman Heights is located in Boyle County
- Shelby City
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Shelby City have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shelby City
- Shelby City is located in Boyle County
- Continue List (11 more) ...
- West Danville
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for West Danville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Danville
- West Danville is located in Boyle County
- Beverly Hills
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Beverly Hills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beverly Hills
- Beverly Hills is located in Boyle County
- Caldwell Manor
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Caldwell Manor have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Caldwell Manor
- Caldwell Manor is located in Boyle County
- Danville
(7 miles [11.3 km] to the northeast)
- Aliceton
(7 miles [11.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Aliceton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Aliceton
- Aliceton is located in Boyle County
- Google driving directions:
- From your current location to Aliceton
- From Parksville to Aliceton
- Craintown
(7 miles [11.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Craintown. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Craintown
- Craintown is located in Boyle County
- Google driving directions:
- From your current location to Craintown
- From Parksville to Craintown
- Green Acres
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Green Acres have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Green Acres
- Green Acres is located in Boyle County
- Faulconer
(9 miles [14.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Faulconer. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Faulconer
- Faulconer is located in Boyle County
- Google driving directions:
- From your current location to Faulconer
- From Parksville to Faulconer
- Little Needmore
(9 miles [14.5 km] to the northeast)
- Clifton
(11 miles [17.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Clifton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Clifton
- Clifton is located in Boyle County
- Google driving directions:
- From your current location to Clifton
- From Parksville to Clifton
- Hedgeville
(11 miles [17.7 km] to the east)
- Adair County
- County Seat for Adair: Columbia
- Genealogy Websites ...
- Nearest Communities to Parksville ...
- These communities are listed by their distance from Parksville.
- Feathersburg
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Feathersburg have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Feathersburg
- Feathersburg is located in Adair County
- Speck
(25 miles [40.2 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Speck. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Speck
- Speck is located in Adair County
- Google driving directions:
- From your current location to Speck
- From Parksville to Speck
- Barnett Springs
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Barnett Springs have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barnett Springs
- Barnett Springs is located in Adair County
- Casey Creek
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Casey Creek have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Casey Creek
- Casey Creek is located in Adair County
- Pellyton
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Pellyton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pellyton
- Pellyton is located in Adair County
- Knifley
(29 miles [46.7 km] to the southwest)
- Dunbar Hill
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Dunbar Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunbar Hill
- Dunbar Hill is located in Adair County
- Neatsville
(30 miles [48.3 km] to the southwest)
- Anderson County
- County Seat for Anderson: Lawrenceburg
- Genealogy Websites ...
- Nearest Communities to Parksville ...
- These communities are listed by their distance from Parksville.
- Ballard
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Ballard have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ballard
- Ballard is located in Anderson County
- Ashbrook
(24 miles [38.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Ashbrook. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ashbrook
- Ashbrook is located in Anderson County
- Google driving directions:
- From your current location to Ashbrook
- From Parksville to Ashbrook
- Nevin
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Nevin have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nevin
- Nevin is located in Anderson County
- Fairview
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairview
- Fairview is located in Anderson County
- Sinai
(25 miles [40.2 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Sinai. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sinai
- Sinai is located in Anderson County
- Google driving directions:
- From your current location to Sinai
- From Parksville to Sinai
- Hickory Grove
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Hickory Grove have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hickory Grove
- Hickory Grove is located in Anderson County
- McBrayer
(26 miles [41.8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for McBrayer. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for McBrayer
- McBrayer is located in Anderson County
- Google driving directions:
- From your current location to McBrayer
- From Parksville to McBrayer
- Johnsonville
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Johnsonville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Johnsonville
- Johnsonville is located in Anderson County
- Klondyke
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Klondyke have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Klondyke
- Klondyke is located in Anderson County
- Sparrow
(26 miles [41.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Sparrow. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sparrow
- Sparrow is located in Anderson County
- Google driving directions:
- From your current location to Sparrow
- From Parksville to Sparrow
- Drydock
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Drydock have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Drydock
- Drydock is located in Anderson County
- Fox Creek
(27 miles [43.5 km] to the north)
- Continue List (7 more) ...
- Stringtown
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Stringtown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stringtown
- Stringtown is located in Anderson County
- Anderson City
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Anderson City have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Anderson City
- Anderson City is located in Anderson County
- Glensboro
(29 miles [46.7 km] to the north)
- Gudgel
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Gudgel have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gudgel
- Gudgel is located in Anderson County
- Van Buren
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Buren
- Van Buren is located in Anderson County
- Lawrenceburg
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Lawrenceburg have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lawrenceburg
- Lawrenceburg is located in Anderson County
- Population from the 2020 Census: 11,529 people
- Jump to TripAdvisor's Tourism page for Lawrenceburg <5>
- Tyrone
(30 miles [48.3 km] to the north)
- Casey County
- County Seat for Casey: Liberty
- Genealogy Websites ...
- Nearest Communities to Parksville ...
- These communities are listed by their distance from Parksville.
- Butchertown
(6 miles [9.7 km] to the south)
- Ellisburg
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Ellisburg have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ellisburg
- Ellisburg is located in Casey County
- Peytons Store
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Peytons Store have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peytons Store
- Peytons Store is located in Casey County
- Chilton
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Chilton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chilton
- Chilton is located in Casey County
- Jacktown
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Jacktown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jacktown
- Jacktown is located in Casey County
- Beech Bottom
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Beech Bottom have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beech Bottom
- Beech Bottom is located in Casey County
- Middleburg
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Middleburg have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middleburg
- Middleburg is located in Casey County
- Yosemite
(17 miles [27.4 km] to the south)
- Lanhamtown
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Lanhamtown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lanhamtown
- Lanhamtown is located in Casey County
- Moore
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Moore have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moore
- Moore is located in Casey County
- Duncan
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Duncan have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Duncan
- Duncan is located in Casey County
- Liberty
(19 miles [30.6 km] to the south)
- Continue List (22 more) ...
- Lawhorn Hill
(20 miles [32.2 km] to the south)
- Note: The GPS coordinates that we are using for Lawhorn Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lawhorn Hill
- Lawhorn Hill is located in Casey County
- Walltown
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Walltown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walltown
- Walltown is located in Casey County
- Atterson
(20 miles [32.2 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Atterson. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Atterson
- Atterson is located in Casey County
- Google driving directions:
- From your current location to Atterson
- From Parksville to Atterson
- Pricetown
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Pricetown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pricetown
- Pricetown is located in Casey County
- Bass
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Bass have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bass
- Bass is located in Casey County
- Cantown
(23 miles [37 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Cantown. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Cantown
- Cantown is located in Casey County
- Google driving directions:
- From your current location to Cantown
- From Parksville to Cantown
- Gilpin
(23 miles [37 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Gilpin. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Gilpin
- Gilpin is located in Casey County
- Google driving directions:
- From your current location to Gilpin
- From Parksville to Gilpin
- Mount Olive
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Mount Olive have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Olive
- Mount Olive is located in Casey County
- Clementsville
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Clementsville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clementsville
- Clementsville is located in Casey County
- Creston
(24 miles [38.6 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Creston. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Creston
- Creston is located in Casey County
- Google driving directions:
- From your current location to Creston
- From Parksville to Creston
- Rheber
(24 miles [38.6 km] to the south)
- Evans Ford
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Evans Ford have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evans Ford
- Evans Ford is located in Casey County
- Labascus
(25 miles [40.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Labascus. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Labascus
- Labascus is located in Casey County
- Google driving directions:
- From your current location to Labascus
- From Parksville to Labascus
- Rubert Ford
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Rubert Ford have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rubert Ford
- Rubert Ford is located in Casey County
- Argyle
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Argyle have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Argyle
- Argyle is located in Casey County
- Bethelridge
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Bethelridge have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bethelridge
- Bethelridge is located in Casey County
- Phil
(26 miles [41.8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Phil. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Phil
- Phil is located in Casey County
- Google driving directions:
- From your current location to Phil
- From Parksville to Phil
- Evona
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Evona have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evona
- Evona is located in Casey County
- Ware
(27 miles [43.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Ware. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ware
- Ware is located in Casey County
- Google driving directions:
- From your current location to Ware
- From Parksville to Ware
- Dunnville
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Dunnville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunnville
- Dunnville is located in Casey County
- Teddy
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Teddy have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Teddy
- Teddy is located in Casey County
- Mintonville
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Mintonville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mintonville
- Mintonville is located in Casey County
- Garrard County
- County Seat for Garrard: Lancaster
- Genealogy Websites ...
- Nearest Communities to Parksville ...
- These communities are listed by their distance from Parksville.
- Davistown
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Davistown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Davistown
- Davistown is located in Garrard County
- Marcellus
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Marcellus have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marcellus
- Marcellus is located in Garrard County
- Marksbury
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Marksbury have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marksbury
- Marksbury is located in Garrard County
- Bryantsville
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Bryantsville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bryantsville
- Bryantsville is located in Garrard County
- Jump to TripAdvisor's Tourism page for Bryantsville <5>
- Buena Vista
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Buena Vista have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buena Vista
- Buena Vista is located in Garrard County
- Toddville
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Toddville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Toddville
- Toddville is located in Garrard County
- White Oak
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for White Oak have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Oak
- White Oak is located in Garrard County
- Lancaster
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Lancaster have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lancaster
- Lancaster is located in Garrard County
- Population from the 2020 Census: 3,840 people
- Jump to TripAdvisor's Tourism page for Lancaster <5>
- Bourne
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Bourne have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bourne
- Bourne is located in Garrard County
- Judson
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Judson have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Judson
- Judson is located in Garrard County
- Three Forks
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Three Forks have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Three Forks
- Three Forks is located in Garrard County
- Hyattsville
(20 miles [32.2 km] to the east)
- Continue List (11 more) ...
- Stone
(20 miles [32.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Stone. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Stone
- Stone is located in Garrard County
- Google driving directions:
- From your current location to Stone
- From Parksville to Stone
- McCreary
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for McCreary have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McCreary
- McCreary is located in Garrard County
- Point Leavell
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Point Leavell have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Point Leavell
- Point Leavell is located in Garrard County
- Teatersville
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Teatersville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Teatersville
- Teatersville is located in Garrard County
- Buckeye
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for Buckeye have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buckeye
- Buckeye is located in Garrard County
- Hackley
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Hackley have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hackley
- Hackley is located in Garrard County
- Nina
(23 miles [37 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Nina. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Nina
- Nina is located in Garrard County
- Google driving directions:
- From your current location to Nina
- From Parksville to Nina
- Manse
(24 miles [38.6 km] to the east)
- Note: The GPS coordinates that we are using for Manse have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manse
- Manse is located in Garrard County
- Lowell
(25 miles [40.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Lowell. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Lowell
- Lowell is located in Garrard County
- Google driving directions:
- From your current location to Lowell
- From Parksville to Lowell
- Cartersville
(26 miles [41.8 km] to the east)
- Paint Lick
(26 miles [41.8 km] to the east)
- Harlan County
- County Seat for Harlan: Harlan
- Genealogy Websites ...
- Nearest Communities to Parksville ...
- Rutherford
(26 miles [41.8 km] to the east)
- Jessamine County
- County Seat for Jessamine: Nicholasville
- Genealogy Websites ...
- Nearest Communities to Parksville ...
- These communities are listed by their distance from Parksville.
- High Bridge
(18 miles [29 km] to the northeast)
- Hall
(19 miles [30.6 km] to the northeast)
- Little Hickman
(21 miles [33.8 km] to the northeast)
- Pink
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Pink have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pink
- Pink is located in Jessamine County
- Wilmore
(22 miles [35.4 km] to the northeast)
- Hanly
(23 miles [37 km] to the northeast)
- Vineyard
(23 miles [37 km] to the northeast)
- Jessamine
(24 miles [38.6 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Jessamine. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Jessamine
- Jessamine is located in Jessamine County
- Google driving directions:
- From your current location to Jessamine
- From Parksville to Jessamine
- Troy
(24 miles [38.6 km] to the northeast)
- Pollard
(25 miles [40.2 km] to the northeast)
- Dixon Town ‑ Historic
(26 miles [41.8 km] to the northeast)
- Mount Lebanon
(26 miles [41.8 km] to the northeast)
- Continue List (6 more) ...
- Nicholasville
(26 miles [41.8 km] to the northeast)
- Keene
(27 miles [43.5 km] to the northeast)
- Logana
(28 miles [45.1 km] to the northeast)
- Nealton
(28 miles [45.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Nealton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Nealton
- Nealton is located in Jessamine County
- Google driving directions:
- From your current location to Nealton
- From Parksville to Nealton
- Catnip ‑ Historic
(29 miles [46.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Catnip. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Catnip
- Catnip is located in Jessamine County
- Google driving directions:
- From your current location to Catnip
- From Parksville to Catnip
- Union Mills
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Union Mills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union Mills
- Union Mills is located in Jessamine County
- Lincoln County
- County Seat for Lincoln: Stanford
- Genealogy Websites ...
- Nearest Communities to Parksville ...
- These communities are listed by their distance from Parksville.
- Milledgeville
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Milledgeville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milledgeville
- Milledgeville is located in Lincoln County
- Moreland
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Moreland have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moreland
- Moreland is located in Lincoln County
- Hustonville
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Hustonville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hustonville
- Hustonville is located in Lincoln County
- Population from the 2020 Census: 368 people
- Jump to TripAdvisor's Tourism page for Hustonville <5>
- Chicken Bristle
(10 miles [16.1 km] to the southeast)
- Turnersville
(11 miles [17.7 km] to the southeast)
- Blue Lick
(12 miles [19.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Blue Lick. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Blue Lick
- Blue Lick is located in Lincoln County
- Google driving directions:
- From your current location to Blue Lick
- From Parksville to Blue Lick
- Boneyville
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Boneyville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boneyville
- Boneyville is located in Lincoln County
- McKinney
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for McKinney have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McKinney
- McKinney is located in Lincoln County
- Jump to TripAdvisor's Tourism page for McKinney <5>
- Hubble
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Hubble have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hubble
- Hubble is located in Lincoln County
- Stanford
(13 miles [20.9 km] to the east)
- Geneva
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Geneva have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Geneva
- Geneva is located in Lincoln County
- Mount Salem
(13 miles [20.9 km] to the southeast)
- Continue List (20 more) ...
- Logantown
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Logantown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Logantown
- Logantown is located in Lincoln County
- Jumbo
(14 miles [22.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Jumbo. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Jumbo
- Jumbo is located in Lincoln County
- Google driving directions:
- From your current location to Jumbo
- From Parksville to Jumbo
- Miracle
(14 miles [22.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Miracle. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Miracle
- Miracle is located in Lincoln County
- Google driving directions:
- From your current location to Miracle
- From Parksville to Miracle
- New Salem
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for New Salem have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Salem
- New Salem is located in Lincoln County
- Rowland
(15 miles [24.1 km] to the east)
- South Fork
(15 miles [24.1 km] to the southeast)
- Gilbert
(16 miles [25.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Gilbert. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Gilbert
- Gilbert is located in Lincoln County
- Google driving directions:
- From your current location to Gilbert
- From Parksville to Gilbert
- Halls Gap
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Halls Gap have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Halls Gap
- Halls Gap is located in Lincoln County
- Highland
(17 miles [27.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Highland. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Highland
- Highland is located in Lincoln County
- Google driving directions:
- From your current location to Highland
- From Parksville to Highland
- Maywood
(17 miles [27.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Maywood. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Maywood
- Maywood is located in Lincoln County
- Google driving directions:
- From your current location to Maywood
- From Parksville to Maywood
- Walnut Flat
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Walnut Flat have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walnut Flat
- Walnut Flat is located in Lincoln County
- Kings Mountain
(19 miles [30.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Kings Mountain have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kings Mountain
- Kings Mountain is located in Lincoln County
- Preachersville
(20 miles [32.2 km] to the east)
- Ottenheim
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Ottenheim have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ottenheim
- Ottenheim is located in Lincoln County
- Sugar Grove
(20 miles [32.2 km] to the southeast)
- Waynesburg
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Waynesburg have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waynesburg
- Waynesburg is located in Lincoln County
- Crab Orchard
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Crab Orchard have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crab Orchard
- Crab Orchard is located in Lincoln County
- Population from the 2020 Census: 822 people
- Jump to TripAdvisor's Tourism page for Crab Orchard <5>
- Broughtentown
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Broughtentown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Broughtentown
- Broughtentown is located in Lincoln County
- Turkeytown
(25 miles [40.2 km] to the southeast)
- Dog Walk
(26 miles [41.8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Dog Walk. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Dog Walk
- Dog Walk is located in Lincoln County
- Google driving directions:
- From your current location to Dog Walk
- From Parksville to Dog Walk
- Madison County
- County Seat for Madison: Richmond
- Genealogy Websites ...
- Nearest Communities to Parksville ...
- These communities are listed by their distance from Parksville.
- Cottonburg
(25 miles [40.2 km] to the east)
- Edenton
(25 miles [40.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Edenton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Edenton
- Edenton is located in Madison County
- Google driving directions:
- From your current location to Edenton
- From Parksville to Edenton
- Kirksville
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Kirksville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kirksville
- Kirksville is located in Madison County
- Round Hill
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Round Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Round Hill
- Round Hill is located in Madison County
- Ruthton
(26 miles [41.8 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Ruthton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ruthton
- Ruthton is located in Madison County
- Google driving directions:
- From your current location to Ruthton
- From Parksville to Ruthton
- Crow Valley
(27 miles [43.5 km] to the east)
- Note: The GPS coordinates that we are using for Crow Valley have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crow Valley
- Crow Valley is located in Madison County
- Buggytown
(28 miles [45.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Buggytown. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Buggytown
- Buggytown is located in Madison County
- Google driving directions:
- From your current location to Buggytown
- From Parksville to Buggytown
- Happy Landing
(28 miles [45.1 km] to the east)
- Baldwin
(28 miles [45.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Baldwin. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Baldwin
- Baldwin is located in Madison County
- Google driving directions:
- From your current location to Baldwin
- From Parksville to Baldwin
- Newby
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Newby have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newby
- Newby is located in Madison County
- Silver Creek
(29 miles [46.7 km] to the east)
- Wallaceton
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Wallaceton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wallaceton
- Wallaceton is located in Madison County
- Continue List (5 more) ...
- Cuzick
(29 miles [46.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Cuzick. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Cuzick
- Cuzick is located in Madison County
- Google driving directions:
- From your current location to Cuzick
- From Parksville to Cuzick
- Duncanon
(30 miles [48.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Duncanon. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Duncanon
- Duncanon is located in Madison County
- Google driving directions:
- From your current location to Duncanon
- From Parksville to Duncanon
- Million
(30 miles [48.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Million. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Million
- Million is located in Madison County
- Google driving directions:
- From your current location to Million
- From Parksville to Million
- Stringtown
(30 miles [48.3 km] to the northeast)
- Valley View
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Valley View have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Valley View
- Valley View is located in Madison County
- Marion County
- County Seat for Marion: Lebanon
- Genealogy Websites ...
- Nearest Communities to Parksville ...
- These communities are listed by their distance from Parksville.
- Gravel Switch
(8 miles [12.9 km] to the west)
- Riley
(11 miles [17.7 km] to the west)
- Penick
(14 miles [22.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Penick. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Penick
- Penick is located in Marion County
- Google driving directions:
- From your current location to Penick
- From Parksville to Penick
- Poplar Corner
(14 miles [22.5 km] to the west)
- Bradfordsville
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Bradfordsville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bradfordsville
- Bradfordsville is located in Marion County
- Population from the 2020 Census: 299 people
- Jump to TripAdvisor's Tourism page for Bradfordsville <5>
- Simstown
(15 miles [24.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Simstown. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Simstown
- Simstown is located in Marion County
- Google driving directions:
- From your current location to Simstown
- From Parksville to Simstown
- Greenbriar
(19 miles [30.6 km] to the west)
- Lebanon
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Lebanon have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lebanon
- Lebanon is located in Marion County
- Population from the 2020 Census: 5,733 people
- Jump to TripAdvisor's Tourism page for Lebanon <5>
- Peck Ford
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Peck Ford have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peck Ford
- Peck Ford is located in Marion County
- Salleetown
(20 miles [32.2 km] to the southwest)
- Calvary
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Calvary have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calvary
- Calvary is located in Marion County
- Phillipsburg
(22 miles [35.4 km] to the southwest)
- Continue List (14 more) ...
- Belltown
(23 miles [37 km] to the west)
- New Market
(23 miles [37 km] to the west)
- Saint Mary
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for Saint Mary have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Mary
- Saint Mary is located in Marion County
- Jump to TripAdvisor's Tourism page for Saint Mary <5>
- Burkes Spring
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Burkes Spring have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burkes Spring
- Burkes Spring is located in Marion County
- Jessietown
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Jessietown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jessietown
- Jessietown is located in Marion County
- Frogtown
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Frogtown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Frogtown
- Frogtown is located in Marion County
- Gandertown
(27 miles [43.5 km] to the west)
- Loretto
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Loretto have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loretto
- Loretto is located in Marion County
- Population from the 2020 Census: 692 people
- Jump to TripAdvisor's Tourism page for Loretto <5>
- Saint Joseph
(27 miles [43.5 km] to the west)
- Nerinx
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Nerinx have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nerinx
- Nerinx is located in Marion County
- Raywick
(29 miles [46.7 km] to the west)
- Saint Francis
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Saint Francis have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Francis
- Saint Francis is located in Marion County
- Dant
(30 miles [48.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Dant. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Dant
- Dant is located in Marion County
- Google driving directions:
- From your current location to Dant
- From Parksville to Dant
- Holy Cross
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Holy Cross have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holy Cross
- Holy Cross is located in Marion County
- Mercer County
- County Seat for Mercer: Harrodsburg
- Genealogy Websites ...
- Nearest Communities to Parksville ...
- These communities are listed by their distance from Parksville.
- Nevada
(6 miles [9.7 km] to the north)
- Dixville
(8 miles [12.9 km] to the northwest)
- Deep Creek
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Deep Creek have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Deep Creek
- Deep Creek is located in Mercer County
- Stewart
(9 miles [14.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Stewart. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Stewart
- Stewart is located in Mercer County
- Google driving directions:
- From your current location to Stewart
- From Parksville to Stewart
- Harrodsburg
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Harrodsburg have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harrodsburg
- Harrodsburg is located in Mercer County
- Population from the 2020 Census: 8,544 people
- Jump to TripAdvisor's Tourism page for Harrodsburg <5>
- Riverview Estates
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Riverview Estates have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riverview Estates
- Riverview Estates is located in Mercer County
- Stringtown
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Stringtown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stringtown
- Stringtown is located in Mercer County
- Burgin
(12 miles [19.3 km] to the northeast)
- Bushtown
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Bushtown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bushtown
- Bushtown is located in Mercer County
- Bohon
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Bohon have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bohon
- Bohon is located in Mercer County
- Cornishville
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Cornishville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cornishville
- Cornishville is located in Mercer County
- Jackson
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Jackson have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jackson
- Jackson is located in Mercer County
- Continue List (16 more) ...
- Braxton
(17 miles [27.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Braxton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Braxton
- Braxton is located in Mercer County
- Google driving directions:
- From your current location to Braxton
- From Parksville to Braxton
- McAfee
(17 miles [27.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for McAfee. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for McAfee
- McAfee is located in Mercer County
- Google driving directions:
- From your current location to McAfee
- From Parksville to McAfee
- Talmage
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Talmage have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Talmage
- Talmage is located in Mercer County
- Shakertown
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Shakertown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shakertown
- Shakertown is located in Mercer County
- Duncan
(18 miles [29 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Duncan. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Duncan
- Duncan is located in Mercer County
- Google driving directions:
- From your current location to Duncan
- From Parksville to Duncan
- Ebenezer
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Ebenezer have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ebenezer
- Ebenezer is located in Mercer County
- Mavo
(19 miles [30.6 km] to the north)
- Jump to our Gazetteer entry for Mavo
- Mavo is located in Mercer County
- Mayo
(19 miles [30.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Mayo. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Mayo
- Mayo is located in Mercer County
- Google driving directions:
- From your current location to Mayo
- From Parksville to Mayo
- Tablow
(19 miles [30.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Tablow. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Tablow
- Tablow is located in Mercer County
- Google driving directions:
- From your current location to Tablow
- From Parksville to Tablow
- Terrapin
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Terrapin have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Terrapin
- Terrapin is located in Mercer County
- Dugansville
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Dugansville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dugansville
- Dugansville is located in Mercer County
- Vanarsdell
(20 miles [32.2 km] to the north)
- Bondville
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Bondville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bondville
- Bondville is located in Mercer County
- Kirkwood
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Kirkwood have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kirkwood
- Kirkwood is located in Mercer County
- Oregon
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Oregon have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oregon
- Oregon is located in Mercer County
- Salvisa
(22 miles [35.4 km] to the north)
- Montgomery County
- County Seat for Montgomery: Mount Sterling
- Genealogy Websites ...
- Nearest Communities to Parksville ...
- Hedgeville
(11 miles [17.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Hedgeville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hedgeville
- Hedgeville is located in Montgomery County
- Hedgeville has also been known as:
- Hedges
- Google driving directions:
- From your current location to Hedgeville
- From Parksville to Hedgeville
- Nelson County
- County Website: www.nelsoncountyky.com
- County Seat for Nelson: Bardstown
- Genealogy Websites ...
- Nearest Communities to Parksville ...
- These communities are listed by their distance from Parksville.
- Chaplin
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Chaplin have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chaplin
- Chaplin is located in Nelson County
- Jump to TripAdvisor's Tourism page for Chaplin <5>
- Botland
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Botland have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Botland
- Botland is located in Nelson County
- Woodlawn
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Woodlawn have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodlawn
- Woodlawn is located in Nelson County
- Pulaski County
- County Website: www.pulaskicountygovt.org/
- County Seat for Pulaski: Somerset
- Genealogy Websites ...
- Nearest Communities to Parksville ...
- These communities are listed by their distance from Parksville.
- Eubank
(25 miles [40.2 km] to the southeast)
- Goochtown
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Goochtown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Goochtown
- Goochtown is located in Pulaski County
- Albia
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Albia have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Albia
- Albia is located in Pulaski County
- Clarence
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Clarence have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarence
- Clarence is located in Pulaski County
- Floyd
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Floyd have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Floyd
- Floyd is located in Pulaski County
- Bee Lick
(28 miles [45.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Bee Lick. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bee Lick
- Bee Lick is located in Pulaski County
- Google driving directions:
- From your current location to Bee Lick
- From Parksville to Bee Lick
- Estesburg
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Estesburg have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Estesburg
- Estesburg is located in Pulaski County
- Ansel
(29 miles [46.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Ansel. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ansel
- Ansel is located in Pulaski County
- Google driving directions:
- From your current location to Ansel
- From Parksville to Ansel
- Randy
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Randy have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Randy
- Randy is located in Pulaski County
- Mangum
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Mangum have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mangum
- Mangum is located in Pulaski County
- Etna
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Etna have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Etna
- Etna is located in Pulaski County
- Mount Zion
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Mount Zion have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Zion
- Mount Zion is located in Pulaski County
- Pulaski
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Pulaski have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pulaski
- Pulaski is located in Pulaski County
- Rockcastle County
- County Seat for Rockcastle: Mount Vernon
- Genealogy Websites ...
- Nearest Communities to Parksville ...
- These communities are listed by their distance from Parksville.
- Gum Sulphur
(26 miles [41.8 km] to the southeast)
- Ottawa
(28 miles [45.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Ottawa. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ottawa
- Ottawa is located in Rockcastle County
- Google driving directions:
- From your current location to Ottawa
- From Parksville to Ottawa
- Brodhead
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Brodhead have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brodhead
- Brodhead is located in Rockcastle County
- Population from the 2020 Census: 1,185 people
- Jump to TripAdvisor's Tourism page for Brodhead <5>
- Quail
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Quail have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Quail
- Quail is located in Rockcastle County
- Taylor County
- County Seat for Taylor: Campbellsville
- Genealogy Websites ...
- Nearest Communities to Parksville ...
- These communities are listed by their distance from Parksville.
- Merrimac
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Merrimac have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Merrimac
- Merrimac is located in Taylor County
- Mannsville
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Mannsville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mannsville
- Mannsville is located in Taylor County
- Spurlington
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Spurlington have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spurlington
- Spurlington is located in Taylor County
- Wooleyville
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Wooleyville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wooleyville
- Wooleyville is located in Taylor County
- Acton
(26 miles [41.8 km] to the southwest)
- Finley
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Finley have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Finley
- Finley is located in Taylor County
- Arista
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Arista have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arista
- Arista is located in Taylor County
- Hobson
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Hobson have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hobson
- Hobson is located in Taylor County
- Elk Horn
(29 miles [46.7 km] to the southwest)
- Continue List (6 more) ...
- South Campbellsville
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for South Campbellsville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Campbellsville
- South Campbellsville is located in Taylor County
- Yuma
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Yuma have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Yuma
- Yuma is located in Taylor County
- Atchison
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Atchison have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Atchison
- Atchison is located in Taylor County
- Campbellsville
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Campbellsville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Campbellsville
- Campbellsville is located in Taylor County
- Population from the 2020 Census: 11,430 people
- Jump to TripAdvisor's Tourism page for Campbellsville <5>
- Saloma
(30 miles [48.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Saloma. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Saloma
- Saloma is located in Taylor County
- Google driving directions:
- From your current location to Saloma
- From Parksville to Saloma
- Willowtown
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Willowtown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willowtown
- Willowtown is located in Taylor County
- Washington County
- County Seat for Washington: Springfield
- Genealogy Websites ...
- Nearest Communities to Parksville ...
- These communities are listed by their distance from Parksville.
- Pottsville
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Pottsville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pottsville
- Pottsville is located in Washington County
- Jenkinsville
(12 miles [19.3 km] to the northwest)
- Texas
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Texas have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Texas
- Texas is located in Washington County
- Mackville
(13 miles [20.9 km] to the northwest)
- Battle
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Battle have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Battle
- Battle is located in Washington County
- Rineltown
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Rineltown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rineltown
- Rineltown is located in Washington County
- Thompsonville
(16 miles [25.7 km] to the northwest)
- Cardwell
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Cardwell have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cardwell
- Cardwell is located in Washington County
- Pleasant Grove
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Pleasant Grove have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Grove
- Pleasant Grove is located in Washington County
- Jimtown
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Jimtown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jimtown
- Jimtown is located in Washington County
- Springfield
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Springfield have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springfield
- Springfield is located in Washington County
- Population from the 2020 Census: 2,987 people
- Jump to TripAdvisor's Tourism page for Springfield <5>
- Willisburg
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Willisburg have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willisburg
- Willisburg is located in Washington County
- Population from the 2020 Census: 282 people
- Jump to TripAdvisor's Tourism page for Willisburg <5>
- Continue List (19 more) ...
- Litsey
(20 miles [32.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Litsey. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Litsey
- Litsey is located in Washington County
- Google driving directions:
- From your current location to Litsey
- From Parksville to Litsey
- Sharpsville
(20 miles [32.2 km] to the northwest)
- Briartown
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Briartown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Briartown
- Briartown is located in Washington County
- Seaville
(21 miles [33.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Seaville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Seaville
- Seaville is located in Washington County
- Google driving directions:
- From your current location to Seaville
- From Parksville to Seaville
- Saint Catharine
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Saint Catharine have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Catharine
- Saint Catharine is located in Washington County
- Hardesty
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Hardesty have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hardesty
- Hardesty is located in Washington County
- Pulliam
(22 miles [35.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Pulliam. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Pulliam
- Pulliam is located in Washington County
- Google driving directions:
- From your current location to Pulliam
- From Parksville to Pulliam
- Tatham Springs
(22 miles [35.4 km] to the northwest)
- Valley Hill
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Valley Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Valley Hill
- Valley Hill is located in Washington County
- Cisselville
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Cisselville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cisselville
- Cisselville is located in Washington County
- Brush Grove
(23 miles [37 km] to the northwest)
- Polin
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Polin have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Polin
- Polin is located in Washington County
- Mooresville
(24 miles [38.6 km] to the northwest)
- Bearwallow
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for Bearwallow have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bearwallow
- Bearwallow is located in Washington County
- Booker
(25 miles [40.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Booker. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Booker
- Booker is located in Washington County
- Google driving directions:
- From your current location to Booker
- From Parksville to Booker
- Fredericktown
(26 miles [41.8 km] to the northwest)
- Maud
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Maud have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maud
- Maud is located in Washington County
- Croakes
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Croakes have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Croakes
- Croakes is located in Washington County
- Manton
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Manton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manton
- Manton is located in Washington County
- Woodford County
- County Seat for Woodford: Versailles
- Genealogy Websites ...
- Nearest Communities to Parksville ...
- These communities are listed by their distance from Parksville.
- Mundys Landing
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for Mundys Landing have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mundys Landing
- Mundys Landing is located in Woodford County
- Nonesuch
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Nonesuch have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nonesuch
- Nonesuch is located in Woodford County
- Mortonsville
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Mortonsville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mortonsville
- Mortonsville is located in Woodford County
- Pinckard
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Pinckard have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pinckard
- Pinckard is located in Woodford County
- Milner
(30 miles [48.3 km] to the north)
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Parksville) to Point B.Our distance measurements begin at a specific point in Parksville. The point we use is located at these GPS coordinates - Latitude: 37.5976, Longitude: -84.8923 |
<2> | Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.
We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.
Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<5> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|