RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Kentucky >> Muhlenberg County >> Hillside >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Kentucky

The Commemorative Quarter for Kentucky





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Hillside (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Hillside. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Hillside is located in Muhlenberg County.

To see how the shape of Kentucky's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Muhlenberg County: Butler, Christian, Hopkins, Logan, McLean, Ohio & Todd.

Below are the counties that are near Hillside. For each of these counties, we show a sample of those communities that are closest to Hillside:

  • Muhlenberg County     (The home county of Hillside)
    • The following are listed by their distance from Hillside, with the one closest to Hillside listed first.
    • Powderly
      (Less than 2 miles to the south)
      • Note: The GPS coordinates that we are using for Powderly have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Powderly
      • Powderly is located in Muhlenberg County
      • Population from the 2020 Census: 736 people
      • Jump to TripAdvisor's Tourism page for Powderly <2>
    • Nebo
      (Less than 2 miles to the west)
      • Note: The GPS coordinates that we are using for Nebo have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nebo
      • Nebo is located in Muhlenberg County
    • Central City
      (3 miles [4.8 km] to the northeast)
    • Greenville
      (3 miles [4.8 km] to the south)
    • Luzerne
      (3 miles [4.8 km] to the southwest)
      • Jump to our Gazetteer entry for Luzerne
      • Luzerne is located in Muhlenberg County
    • Cleaton
      (4 miles [6.4 km] to the east)
      • Note: The GPS coordinates that we are using for Cleaton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cleaton
      • Cleaton is located in Muhlenberg County
    • Depoy
      (4 miles [6.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Depoy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Depoy
      • Depoy is located in Muhlenberg County
    • Nonnell
      (5 miles [8 km] to the east)
      • Jump to our Gazetteer entry for Nonnell
      • Nonnell is located in Muhlenberg County
      • Former name for Nonnell:
      • Tarma
    • Drakesboro
      (6 miles [9.7 km] to the east)
    • South Carrollton
      (6 miles [9.7 km] to the north)
      • Note: The GPS coordinates that we are using for South Carrollton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for South Carrollton
      • South Carrollton is located in Muhlenberg County
      • Population from the 2020 Census: 181 people
    • Graham
      (6 miles [9.7 km] to the west)
      • Note: The GPS coordinates that we are using for Graham have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Graham
      • Graham is located in Muhlenberg County
    • Beech Creek
      (7 miles [11.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Beech Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beech Creek
      • Beech Creek is located in Muhlenberg County
    • Bancroft
      (7 miles [11.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Bancroft have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bancroft
      • Bancroft is located in Muhlenberg County
  • Butler County
    • The following are listed by their distance from Hillside, with the one closest to Hillside listed first.
    • Rochester
      (15 miles [24.1 km] to the east)
      • Note: The GPS coordinates that we are using for Rochester have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rochester
      • Rochester is located in Butler County
      • Population from the 2020 Census: 149 people
    • Huntsville
      (16 miles [25.7 km] to the east)
      • Note: The GPS coordinates that we are using for Huntsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Huntsville
      • Huntsville is located in Butler County
    • Provo
      (18 miles [29 km] to the east)
      • Jump to our Gazetteer entry for Provo
      • Provo is located in Butler County
    • Silver City
      (19 miles [30.6 km] to the east)
      • Jump to our Gazetteer entry for Silver City
      • Silver City is located in Butler County
    • Harreldsville
      (19 miles [30.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Harreldsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harreldsville
      • Harreldsville is located in Butler County
    • Mining City
      (21 miles [33.8 km] to the east)
      • Note: The GPS coordinates that we are using for Mining City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mining City
      • Mining City is located in Butler County
    • Quality
      (21 miles [33.8 km] to the southeast)
      • Jump to our Gazetteer entry for Quality
      • Quality is located in Butler County
    • Dunbar
      (22 miles [35.4 km] to the east)
      • Note: The GPS coordinates that we are using for Dunbar have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dunbar
      • Dunbar is located in Butler County
    • Aberdeen
      (26 miles [41.8 km] to the east)
      • Note: The GPS coordinates that we are using for Aberdeen have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Aberdeen
      • Aberdeen is located in Butler County
      • Jump to TripAdvisor's Tourism page for Aberdeen <2>
    • Morgantown
      (26 miles [41.8 km] to the east)
    • Woodbury
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for Woodbury have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Woodbury
      • Woodbury is located in Butler County
      • Population from the 2020 Census: 88 people
    • Richelieu
      (30 miles [48.3 km] to the southeast)
      • Jump to our Gazetteer entry for Richelieu
      • Richelieu is located in Butler County
  • Christian County
    • The following are listed by their distance from Hillside, with the one closest to Hillside listed first.
    • Bluff Spring
      (18 miles [29 km] to the southwest)
      • Jump to our Gazetteer entry for Bluff Spring
      • Bluff Spring is located in Christian County
    • Empire
      (21 miles [33.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Empire have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Empire
      • Empire is located in Christian County
    • Fearsville
      (21 miles [33.8 km] to the southwest)
      • Jump to our Gazetteer entry for Fearsville
      • Fearsville is located in Christian County
    • Crofton
      (22 miles [35.4 km] to the southwest)
    • Fairview
      (28 miles [45.1 km] to the south)
  • Daviess County
    • The following are listed by their distance from Hillside, with the one closest to Hillside listed first.
    • Utica
      (24 miles [38.6 km] to the north)
      • Note: The GPS coordinates that we are using for Utica have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Utica
      • Utica is located in Daviess County
      • Jump to TripAdvisor's Tourism page for Utica <2>
    • Moseleyville
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for Moseleyville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Moseleyville
      • Moseleyville is located in Daviess County
    • Masonville
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Masonville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Masonville
      • Masonville is located in Daviess County
  • Hopkins County
    • The following are listed by their distance from Hillside, with the one closest to Hillside listed first.
    • White Plains
      (12 miles [19.3 km] to the west)
      • Note: The GPS coordinates that we are using for White Plains have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for White Plains
      • White Plains is located in Hopkins County
      • Population from the 2020 Census: 900 people
      • Jump to TripAdvisor's Tourism page for White Plains <2>
    • Nortonville
      (16 miles [25.7 km] to the west)
    • Oak Hill
      (16 miles [25.7 km] to the west)
      • Jump to our Gazetteer entry for Oak Hill
      • Oak Hill is located in Hopkins County
    • Mortons Gap
      (17 miles [27.4 km] to the west)
    • Earlington
      (19 miles [30.6 km] to the west)
      • Note: The GPS coordinates that we are using for Earlington have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Earlington
      • Earlington is located in Hopkins County
      • Population from the 2020 Census: 1,321 people
      • Jump to TripAdvisor's Tourism page for Earlington <2>
    • Madisonville
      (19 miles [30.6 km] to the west)
      • Note: The GPS coordinates that we are using for Madisonville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Madisonville
      • Madisonville is located in Hopkins County
      • Population from the 2020 Census: 18,656 people
      • Jump to TripAdvisor's Tourism page for Madisonville <2>
    • Hanson
      (20 miles [32.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Hanson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hanson
      • Hanson is located in Hopkins County
      • Population from the 2020 Census: 709 people
      • Jump to TripAdvisor's Tourism page for Hanson <2>
    • Vandetta
      (20 miles [32.2 km] to the northwest)
      • Jump to our Gazetteer entry for Vandetta
      • Vandetta is located in Hopkins County
    • Jewel City
      (21 miles [33.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Jewel City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jewel City
      • Jewel City is located in Hopkins County
    • Saint Charles
      (21 miles [33.8 km] to the west)
      • Jump to our Gazetteer entry for Saint Charles
      • Saint Charles is located in Hopkins County
      • Population from the 2020 Census: 269 people
    • Richland
      (23 miles [37 km] to the west)
      • Jump to our Gazetteer entry for Richland
      • Richland is located in Hopkins County
    • Manitou
      (24 miles [38.6 km] to the west)
      • Note: The GPS coordinates that we are using for Manitou have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Manitou
      • Manitou is located in Hopkins County
    • Charleston
      (27 miles [43.5 km] to the west)
      • Jump to our Gazetteer entry for Charleston
      • Charleston is located in Hopkins County
  • Logan County
    • The following are listed by their distance from Hillside, with the one closest to Hillside listed first.
    • Agnes
      (15 miles [24.1 km] to the southeast)
      • Jump to our Gazetteer entry for Agnes
      • Agnes is located in Logan County
    • Lewisburg
      (21 miles [33.8 km] to the southeast)
    • Lost City
      (23 miles [37 km] to the southeast)
      • Note: The GPS coordinates that we are using for Lost City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lost City
      • Lost City is located in Logan County
    • Gordonsville
      (29 miles [46.7 km] to the south)
      • Jump to our Gazetteer entry for Gordonsville
      • Gordonsville is located in Logan County
  • McLean County
    • The following are listed by their distance from Hillside, with the one closest to Hillside listed first.
    • Sacramento
      (12 miles [19.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Sacramento have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sacramento
      • Sacramento is located in McLean County
      • Population from the 2020 Census: 438 people
      • Jump to TripAdvisor's Tourism page for Sacramento <2>
    • Island
      (13 miles [20.9 km] to the north)
    • Livermore
      (16 miles [25.7 km] to the north)
      • Note: The GPS coordinates that we are using for Livermore have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Livermore
      • Livermore is located in McLean County
      • Population from the 2020 Census: 1,270 people
      • Jump to TripAdvisor's Tourism page for Livermore <2>
    • Buel
      (20 miles [32.2 km] to the north)
      • Jump to our Gazetteer entry for Buel
      • Buel is located in McLean County
    • Calhoun
      (20 miles [32.2 km] to the north)
      • Jump to our Gazetteer entry for Calhoun
      • Calhoun is located in McLean County
      • Population from the 2020 Census: 723 people
      • Former names for Calhoun:
      • Calhoon
      • Fort Vienna
      • Vienna Station
      • Jump to TripAdvisor's Tourism page for Calhoun <2>
    • Rumsey
      (20 miles [32.2 km] to the north)
      • Jump to our Gazetteer entry for Rumsey
      • Rumsey is located in McLean County
    • Glenville
      (23 miles [37 km] to the north)
      • Note: The GPS coordinates that we are using for Glenville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Glenville
      • Glenville is located in McLean County
    • Lemon
      (25 miles [40.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Lemon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lemon
      • Lemon is located in McLean County
    • Beech Grove
      (28 miles [45.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Beech Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beech Grove
      • Beech Grove is located in McLean County
      • Jump to TripAdvisor's Tourism page for Beech Grove <2>
    • Elba
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Elba have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elba
      • Elba is located in McLean County
  • Ohio County
    • The following are listed by their distance from Hillside, with the one closest to Hillside listed first.
    • Ceralvo
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Ceralvo have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ceralvo
      • Ceralvo is located in Ohio County
    • Rockport
      (11 miles [17.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Rockport have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rockport
      • Rockport is located in Ohio County
      • Population from the 2020 Census: 263 people
    • Echols
      (12 miles [19.3 km] to the northeast)
      • Jump to our Gazetteer entry for Echols
      • Echols is located in Ohio County
    • Centertown
      (14 miles [22.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Centertown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Centertown
      • Centertown is located in Ohio County
      • Population from the 2020 Census: 430 people
    • McHenry
      (16 miles [25.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for McHenry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McHenry
      • McHenry is located in Ohio County
      • Population from the 2020 Census: 380 people
    • Beaver Dam
      (19 miles [30.6 km] to the northeast)
    • Hartford
      (20 miles [32.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Hartford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hartford
      • Hartford is located in Ohio County
      • Population from the 2020 Census: 2,715 people
      • Jump to TripAdvisor's Tourism page for Hartford <2>
    • Cromwell
      (21 miles [33.8 km] to the east)
      • Jump to our Gazetteer entry for Cromwell
      • Cromwell is located in Ohio County
    • Beda
      (21 miles [33.8 km] to the northeast)
      • Jump to our Gazetteer entry for Beda
      • Beda is located in Ohio County
    • Buford
      (23 miles [37 km] to the northeast)
      • Jump to our Gazetteer entry for Buford
      • Buford is located in Ohio County
    • Select
      (24 miles [38.6 km] to the east)
      • Jump to our Gazetteer entry for Select
      • Select is located in Ohio County
      • Former name for Select:
      • Stweartsville
    • Mount Pleasant
      (25 miles [40.2 km] to the northeast)
      • Jump to our Gazetteer entry for Mount Pleasant
      • Mount Pleasant is located in Ohio County
    • Rosine
      (27 miles [43.5 km] to the northeast)
  • Todd County
    • The following are listed by their distance from Hillside, with the one closest to Hillside listed first.
    • Clifty
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Clifty have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clifty
      • Clifty is located in Todd County
    • Kirkmansville
      (17 miles [27.4 km] to the south)
      • Jump to our Gazetteer entry for Kirkmansville
      • Kirkmansville is located in Todd County
    • Allegre
      (22 miles [35.4 km] to the south)
      • Note: The GPS coordinates that we are using for Allegre have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Allegre
      • Allegre is located in Todd County
    • Sharon Grove
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for Sharon Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sharon Grove
      • Sharon Grove is located in Todd County
    • Elkton
      (30 miles [48.3 km] to the south)
      • Note: The GPS coordinates that we are using for Elkton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elkton
      • Elkton is located in Todd County
      • Population from the 2020 Census: 2,157 people
      • Jump to TripAdvisor's Tourism page for Elkton <2>
  • Webster County
    • The following are listed by their distance from Hillside, with the one closest to Hillside listed first.
    • Slaughters
      (24 miles [38.6 km] to the northwest)
      • Jump to our Gazetteer entry for Slaughters
      • Slaughters is located in Webster County
      • Population from the 2020 Census: 206 people
    • Onton
      (25 miles [40.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Onton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Onton
      • Onton is located in Webster County

For an expanded list of the communities that are closest to Hillside, see our County-by-County Page for Hillside.

Newspapers Published in Hillside ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 54 newspapers that have been published in the area around Hillside.

Although we're unaware of any newspapers that were published in the immediate area of Hillside, there are papers which were published within 22 miles [35.4 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Hillside.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Hillside:

Cemeteries Near Hillside ...

Below are cemeteries that are in the vicinity of Hillside.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Hillside covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Hillside, with the one closest to Hillside listed first.

  • Cessna Cemetery
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for the Cessna Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Cessna Cemetery
  • Nebo Cemetery
    (Less than 2 miles to the west)
    • Note: The GPS coordinates that we are using for the Nebo Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Nebo Cemetery
  • Jago Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the Jago Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Jago Cemetery
  • Coleman Cemetery
    (2 miles [3.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Coleman Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Coleman Cemetery
  • Wilcox Cemetery
    (2 miles [3.2 km] to the east)
    • Note: The GPS coordinates that we are using for the Wilcox Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Wilcox Cemetery
  • Fortney Cemetery
    (2 miles [3.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Fortney Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Fortney Cemetery
  • Evergreen Cemetery
    (3 miles [4.8 km] to the south)
    • Note: The GPS coordinates that we are using for the Evergreen Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Evergreen Cemetery
  • Stewart Cemetery
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Stewart Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Stewart Cemetery
  • Cypress Cemetery
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for the Cypress Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Cypress Cemetery
  • Luckett Cemetery
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for the Luckett Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Luckett Cemetery
  • West End Cemetery
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for the West End Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the West End Cemetery
  • Miller Cemetery
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for the Miller Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Miller Cemetery
  • Continue List   (316 more) ...
    • Rose Hill Cemetery
      (4 miles [6.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for the Rose Hill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Rose Hill Cemetery
    • Fairmont Cemetery
      (4 miles [6.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for the Fairmont Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Fairmont Cemetery
    • Coleman Cemetery
      (4 miles [6.4 km] to the north)
      • Note: The GPS coordinates that we are using for the Coleman Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Coleman Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

While we didn't find Hillside in the Atlas, the following 1895 communities would have been found near the current location of Hillside.

These communities are listed based on their distance from Hillside, with the one closest to Hillside listed first.

  • Powderly
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for Powderly have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Powderly
    • Powderly is located in Muhlenberg County
    • Population from the 2020 Census: 736 people
    • Jump to TripAdvisor's Tourism page for Powderly <2>
  • Greenville
    (3 miles [4.8 km] to the south)
  • Central City
    (3 miles [4.8 km] to the northeast)
  • Depoy
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Depoy have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Depoy
    • Depoy is located in Muhlenberg County
  • Bevier
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for Bevier have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bevier
    • Bevier is located in Muhlenberg County
  • Drakesboro
    (6 miles [9.7 km] to the east)
  • Gishton
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Gishton have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gishton
    • Gishton is located in Muhlenberg County
  • South Carrollton
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for South Carrollton have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for South Carrollton
    • South Carrollton is located in Muhlenberg County
    • Population from the 2020 Census: 181 people
  • Bremen
    (8 miles [12.9 km] to the north)
    • Note: The GPS coordinates that we are using for Bremen have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bremen
    • Bremen is located in Muhlenberg County
    • Population from the 2020 Census: 188 people
    • Jump to TripAdvisor's Tourism page for Bremen <2>
  • Nelson
    (8 miles [12.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Nelson have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Nelson
    • Nelson is located in Muhlenberg County
  • Earles
    (8 miles [12.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Earles have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Earles
    • Earles is located in Muhlenberg County
  • McNary
    (9 miles [14.5 km] to the west)
    • Note: The GPS coordinates that we are using for McNary have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for McNary
    • McNary is located in Muhlenberg County
  • Continue List   (14 more) ...
    • Belton
      (9 miles [14.5 km] to the southeast)
      • Jump to our Gazetteer entry for Belton
      • Belton is located in Muhlenberg County
      • Former name for Belton:
      • Yost
    • Paradise ‑ Historic
      (9 miles [14.5 km] to the east)
      • Note: The GPS coordinates that we are using for Paradise have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Paradise
      • Paradise is located in Muhlenberg County
    • Smallhous
      (9 miles [14.5 km] to the north)
      • Note: The GPS coordinates that we are using for Smallhous have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Smallhous
      • Smallhous is located in Ohio County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Hillside. See our List of 1890's Communities around Hillside.

Unfortunately, we don't know of a website for Hillside. If you can help, please contact us through our Feedback Page.

The official website for State of Kentucky: https://kentucky.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Hillside) to Point B.Our distance measurements begin at a specific point in Hillside. The point we use is located at these GPS coordinates - Latitude: 37.2484, Longitude: -87.1633       In this case, the coordinates for Hillside have been provided by the Geographic Names Information System (GNIS).
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Hillside, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024