|
Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Glencoe (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Glencoe. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Glencoe is located in Gallatin County.
To see how the shape of Kentucky's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Gallatin County: Switzerland (IN), Boone, Carroll, Grant & Owen.
Below are the counties that are near Glencoe. For each of these counties, we show a sample of those communities that are closest to Glencoe:
- Gallatin County (The home county of Glencoe)
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Sparta
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Sparta have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sparta
- Sparta is located in Gallatin County
- Population from the 2020 Census: 273 people
- Jump to TripAdvisor's Tourism page for Sparta <2>
- Warsaw
(6 miles [9.7 km] to the northwest)
- Ryle
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Ryle have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ryle
- Ryle is located in Gallatin County
- Boone County
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Hume
(10 miles [16.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Hume. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hume
- Hume is located in Boone County
- Google driving directions:
- From your current location to Hume
- From Glencoe to Hume
- Hamilton
(11 miles [17.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Hamilton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hamilton
- Hamilton is located in Boone County
- Google driving directions:
- From your current location to Hamilton
- From Glencoe to Hamilton
- Verona
(11 miles [17.7 km] to the northeast)
- Big Bone
(12 miles [19.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Big Bone. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Big Bone
- Big Bone is located in Boone County
- Google driving directions:
- From your current location to Big Bone
- From Glencoe to Big Bone
- Beaverlick
(13 miles [20.9 km] to the northeast)
- Rabbit Hash
(15 miles [24.1 km] to the north)
- Walton
(15 miles [24.1 km] to the northeast)
- Hueys Corners
(16 miles [25.7 km] to the north)
- Kensington
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Kensington have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kensington
- Kensington is located in Boone County
- Richwood
(17 miles [27.4 km] to the northeast)
- Union
(17 miles [27.4 km] to the northeast)
- Belleview
(18 miles [29 km] to the north)
- McVille
(18 miles [29 km] to the north)
- Boyd County
- Rockdale
(22 miles [35.4 km] to the south)
- Campbell County
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Grants Lick
(25 miles [40.2 km] to the northeast)
- Claryville
(26 miles [41.8 km] to the northeast)
- Alexandria
(28 miles [45.1 km] to the northeast)
- Kohler
(28 miles [45.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Kohler. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Kohler
- Kohler is located in Campbell County
- Google driving directions:
- From your current location to Kohler
- From Glencoe to Kohler
- Cold Spring
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Cold Spring have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cold Spring
- Cold Spring is located in Campbell County
- Population from the 2020 Census: 6,628 people
- Jump to TripAdvisor's Tourism page for Cold Spring <2>
- Highland Heights
(29 miles [46.7 km] to the northeast)
- Wilder
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Wilder have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilder
- Wilder is located in Campbell County
- Population from the 2020 Census: 3,061 people
- Jump to TripAdvisor's Tourism page for Wilder <2>
- Crestview
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Crestview have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crestview
- Crestview is located in Campbell County
- Population from the 2020 Census: 498 people
- Gubser Mill
(30 miles [48.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Gubser Mill. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Gubser Mill
- Gubser Mill is located in Campbell County
- Google driving directions:
- From your current location to Gubser Mill
- From Glencoe to Gubser Mill
- Carroll County
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Sanders
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Sanders have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sanders
- Sanders is located in Carroll County
- Population from the 2020 Census: 236 people
- Jump to TripAdvisor's Tourism page for Sanders <2>
- Carson
(7 miles [11.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Carson. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Carson
- Carson is located in Carroll County
- Google driving directions:
- From your current location to Carson
- From Glencoe to Carson
- Ghent
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Ghent have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ghent
- Ghent is located in Carroll County
- Population from the 2020 Census: 307 people
- Jump to TripAdvisor's Tourism page for Ghent <2>
- Easterday
(13 miles [20.9 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Easterday. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Easterday
- Easterday is located in Carroll County
- Google driving directions:
- From your current location to Easterday
- From Glencoe to Easterday
- Worthville
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Worthville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Worthville
- Worthville is located in Carroll County
- Population from the 2020 Census: 195 people
- Langstaff
(16 miles [25.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Langstaff. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Langstaff
- Langstaff is located in Carroll County
- Google driving directions:
- From your current location to Langstaff
- From Glencoe to Langstaff
- English
(17 miles [27.4 km] to the west)
- Carrollton
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Carrollton have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carrollton
- Carrollton is located in Carroll County
- Population from the 2020 Census: 3,806 people
- Jump to TripAdvisor's Tourism page for Carrollton <2>
- Prestonville
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Prestonville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Prestonville
- Prestonville is located in Carroll County
- Population from the 2020 Census: 160 people
- Locust
(23 miles [37 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Locust. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Locust
- Locust is located in Carroll County
- Google driving directions:
- From your current location to Locust
- From Glencoe to Locust
- Franklin County
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Elmville
(25 miles [40.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Elmville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Elmville
- Elmville is located in Franklin County
- Google driving directions:
- From your current location to Elmville
- From Glencoe to Elmville
- Swallowfield
(25 miles [40.2 km] to the south)
- Grant County
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Elliston
(4 miles [6.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Elliston. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Elliston
- Elliston is located in Grant County
- Google driving directions:
- From your current location to Elliston
- From Glencoe to Elliston
- Jonesville
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Jonesville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jonesville
- Jonesville is located in Grant County
- Zion Station
(6 miles [9.7 km] to the northeast)
- Jericho
(8 miles [12.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Jericho. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Jericho
- Jericho is located in Grant County
- Google driving directions:
- From your current location to Jericho
- From Glencoe to Jericho
- Mount Zion
(9 miles [14.5 km] to the east)
- Stewartsville
(10 miles [16.1 km] to the southeast)
- Dry Ridge
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Dry Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dry Ridge
- Dry Ridge is located in Grant County
- Population from the 2020 Census: 2,207 people
- Jump to TripAdvisor's Tourism page for Dry Ridge <2>
- Sherman
(12 miles [19.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Sherman. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sherman
- Sherman is located in Grant County
- Google driving directions:
- From your current location to Sherman
- From Glencoe to Sherman
- Crittenden
(12 miles [19.3 km] to the northeast)
- Heekin
(13 miles [20.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Heekin. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Heekin
- Heekin is located in Grant County
- Google driving directions:
- From your current location to Heekin
- From Glencoe to Heekin
- Lawrenceville
(13 miles [20.9 km] to the southeast)
- Williamstown
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Williamstown have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamstown
- Williamstown is located in Grant County
- Population from the 2020 Census: 3,939 people
- Jump to TripAdvisor's Tourism page for Williamstown <2>
- Cherry Grove
(15 miles [24.1 km] to the southeast)
- Harrison County
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Boyd
(25 miles [40.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Boyd. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Boyd
- Boyd is located in Harrison County
- Google driving directions:
- From your current location to Boyd
- From Glencoe to Boyd
- Berry
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Berry have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Berry
- Berry is located in Harrison County
- Population from the 2020 Census: 250 people
- Renaker
(27 miles [43.5 km] to the southeast)
- Rutland
(27 miles [43.5 km] to the southeast)
- Henry County
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Port Royal
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Port Royal have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Port Royal
- Port Royal is located in Henry County
- Lockport
(20 miles [32.2 km] to the south)
- Turners Station
(21 miles [33.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Turners Station have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Turners Station
- Turners Station is located in Henry County
- Franklinton
(22 miles [35.4 km] to the southwest)
- Campbellsburg
(24 miles [38.6 km] to the southwest)
- Bethlehem
(25 miles [40.2 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Bethlehem. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bethlehem
- Bethlehem is located in Henry County
- Google driving directions:
- From your current location to Bethlehem
- From Glencoe to Bethlehem
- New Castle
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for New Castle have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Castle
- New Castle is located in Henry County
- Population from the 2020 Census: 930 people
- Jump to TripAdvisor's Tourism page for New Castle <2>
- Sulphur
(28 miles [45.1 km] to the southwest)
- Pleasureville
(29 miles [46.7 km] to the southwest)
- Eminence
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Eminence have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eminence
- Eminence is located in Henry County
- Population from the 2020 Census: 2,566 people
- Jump to TripAdvisor's Tourism page for Eminence <2>
- Jefferson County
- Portland
(20 miles [32.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Portland. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Portland
- Portland is located in Jefferson County
- Google driving directions:
- From your current location to Portland
- From Glencoe to Portland
- Kenton County
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Bracht
(14 miles [22.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Bracht. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bracht
- Bracht is located in Kenton County
- Google driving directions:
- From your current location to Bracht
- From Glencoe to Bracht
- Piner
(17 miles [27.4 km] to the northeast)
- Fiskburg
(18 miles [29 km] to the east)
- Nicholson
(20 miles [32.2 km] to the northeast)
- Morning View
(21 miles [33.8 km] to the northeast)
- Elsmere
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Elsmere have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elsmere
- Elsmere is located in Kenton County
- Population from the 2020 Census: 8,646 people
- Independence
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Independence have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Independence
- Independence is located in Kenton County
- Population from the 2020 Census: 28,903 people
- Jump to TripAdvisor's Tourism page for Independence <2>
- Kenton
(22 miles [35.4 km] to the northeast)
- White Villa
(23 miles [37 km] to the northeast)
- Edgewood
(24 miles [38.6 km] to the northeast)
- Erlanger
(24 miles [38.6 km] to the northeast)
- Ryland
(24 miles [38.6 km] to the northeast)
- Visalia
(24 miles [38.6 km] to the northeast)
- Owen County
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Eagle Hill
(2 miles [3.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Eagle Hill. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Eagle Hill
- Eagle Hill is located in Owen County
- Google driving directions:
- From your current location to Eagle Hill
- From Glencoe to Eagle Hill
- Poplar Grove
(3 miles [4.8 km] to the south)
- Bromley
(5 miles [8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Bromley. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bromley
- Bromley is located in Owen County
- Google driving directions:
- From your current location to Bromley
- From Glencoe to Bromley
- Long Ridge
(8 miles [12.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Long Ridge. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Long Ridge
- Long Ridge is located in Owen County
- Google driving directions:
- From your current location to Long Ridge
- From Glencoe to Long Ridge
- New Liberty
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for New Liberty have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Liberty
- New Liberty is located in Owen County
- Needmore
(10 miles [16.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Needmore. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Needmore
- Needmore is located in Owen County
- Google driving directions:
- From your current location to Needmore
- From Glencoe to Needmore
- Cull
(10 miles [16.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Cull. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Cull
- Cull is located in Owen County
- Google driving directions:
- From your current location to Cull
- From Glencoe to Cull
- Wheatley
(10 miles [16.1 km] to the southwest)
- Sweet Owen
(11 miles [17.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Sweet Owen. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sweet Owen
- Sweet Owen is located in Owen County
- Google driving directions:
- From your current location to Sweet Owen
- From Glencoe to Sweet Owen
- Hensley Ford
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Hensley Ford have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hensley Ford
- Hensley Ford is located in Owen County
- Holiday Ford
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Holiday Ford have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holiday Ford
- Holiday Ford is located in Owen County
- Owenton
(12 miles [19.3 km] to the south)
- Squiresville
(13 miles [20.9 km] to the southwest)
- Pendleton County
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Gardnersville
(17 miles [27.4 km] to the east)
- Knoxville
(17 miles [27.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Knoxville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Knoxville
- Knoxville is located in Pendleton County
- Google driving directions:
- From your current location to Knoxville
- From Glencoe to Knoxville
- Doughton
(18 miles [29 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Doughton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Doughton
- Doughton is located in Pendleton County
- Google driving directions:
- From your current location to Doughton
- From Glencoe to Doughton
- Locust Grove
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Locust Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Locust Grove
- Locust Grove is located in Pendleton County
- Goforth
(20 miles [32.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Goforth. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Goforth
- Goforth is located in Pendleton County
- Google driving directions:
- From your current location to Goforth
- From Glencoe to Goforth
- Portland
(20 miles [32.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Portland. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Portland
- Portland is located in Pendleton County
- Google driving directions:
- From your current location to Portland
- From Glencoe to Portland
- Marcus
(21 miles [33.8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Marcus. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Marcus
- Marcus is located in Pendleton County
- Google driving directions:
- From your current location to Marcus
- From Glencoe to Marcus
- DeMossville
(22 miles [35.4 km] to the east)
- Caldwell
(23 miles [37 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Caldwell. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Caldwell
- Caldwell is located in Pendleton County
- Google driving directions:
- From your current location to Caldwell
- From Glencoe to Caldwell
- Greenwood
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Greenwood have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenwood
- Greenwood is located in Pendleton County
- Butler
(24 miles [38.6 km] to the east)
- Morgan
(24 miles [38.6 km] to the east)
- Note: The GPS coordinates that we are using for Morgan have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morgan
- Morgan is located in Pendleton County
- Boston
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Boston have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boston
- Boston is located in Pendleton County
- Scott County
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Josephine
(23 miles [37 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Josephine. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Josephine
- Josephine is located in Scott County
- Google driving directions:
- From your current location to Josephine
- From Glencoe to Josephine
- Stonewall
(23 miles [37 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Stonewall. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Stonewall
- Stonewall is located in Scott County
- Google driving directions:
- From your current location to Stonewall
- From Glencoe to Stonewall
- Suterville
(24 miles [38.6 km] to the south)
- Porter
(25 miles [40.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Porter. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Porter
- Porter is located in Scott County
- Google driving directions:
- From your current location to Porter
- From Glencoe to Porter
- Longlick
(27 miles [43.5 km] to the south)
- Minorsville
(27 miles [43.5 km] to the south)
- Biddle
(27 miles [43.5 km] to the southeast)
- Sadieville
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Sadieville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sadieville
- Sadieville is located in Scott County
- Population from the 2020 Census: 371 people
- Double Culvert
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Double Culvert have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Double Culvert
- Double Culvert is located in Scott County
- Skinnersburg
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Skinnersburg have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Skinnersburg
- Skinnersburg is located in Scott County
- Davis
(30 miles [48.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Davis. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Davis
- Davis is located in Scott County
- Google driving directions:
- From your current location to Davis
- From Glencoe to Davis
- Mallard Point
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Mallard Point have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mallard Point
- Mallard Point is located in Scott County
- Turkey Foot
(30 miles [48.3 km] to the southeast)
- Trimble County
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Bedford
(27 miles [43.5 km] to the west)
- Milton
(29 miles [46.7 km] to the west)
- Dearborn County (IN)
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Aurora
(23 miles [37 km] to the north)
- Dillsboro
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Dillsboro have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dillsboro
- Dillsboro is located in Dearborn County (IN)
- Population from the 2020 Census: 1,423 people
- Jump to TripAdvisor's Tourism page for Dillsboro <2>
- Lawrenceburg
(26 miles [41.8 km] to the north)
- Greendale
(27 miles [43.5 km] to the north)
- Sparta
(29 miles [46.7 km] to the northwest)
- Hidden Valley
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Hidden Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hidden Valley
- Hidden Valley is located in Dearborn County (IN)
- Kyle
(30 miles [48.3 km] to the north)
- Moores Hill
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Moores Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moores Hill
- Moores Hill is located in Dearborn County (IN)
- Population from the 2020 Census: 621 people
- Jump to TripAdvisor's Tourism page for Moores Hill <2>
- Jefferson County (IN)
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Brooksburg
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Brooksburg have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brooksburg
- Brooksburg is located in Jefferson County (IN)
- Population from the 2020 Census: 80 people
- Manville
(25 miles [40.2 km] to the west)
- Canaan
(27 miles [43.5 km] to the west)
- Ohio County (IN)
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Rising Sun
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Rising Sun have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rising Sun
- Rising Sun is located in Ohio County (IN)
- Population from the 2020 Census: 2,131 people
- Jump to TripAdvisor's Tourism page for Rising Sun <2>
- Bear Branch
(19 miles [30.6 km] to the northwest)
- Ripley County (IN)
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Friendship
(24 miles [38.6 km] to the northwest)
- Cross Plains
(25 miles [40.2 km] to the northwest)
- Switzerland County (IN)
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Florence
(7 miles [11.3 km] to the northwest)
- Patriot
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Patriot have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Patriot
- Patriot is located in Switzerland County (IN)
- Population from the 2020 Census: 212 people
- Jump to TripAdvisor's Tourism page for Patriot <2>
- Searcy Crossroads
(9 miles [14.5 km] to the north)
- Antioch
(10 miles [16.1 km] to the north)
- Vevay
(13 miles [20.9 km] to the west)
- East Enterprise
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for East Enterprise have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Enterprise
- East Enterprise is located in Switzerland County (IN)
- Mount Sterling
(14 miles [22.5 km] to the west)
- Bennington
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Bennington have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bennington
- Bennington is located in Switzerland County (IN)
- Lamb
(19 miles [30.6 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Lamb. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Lamb
- Lamb is located in Switzerland County (IN)
- Google driving directions:
- From your current location to Lamb
- From Glencoe to Lamb
- Moorefield
(19 miles [30.6 km] to the west)
- Avonburg
(22 miles [35.4 km] to the northwest)
- Pleasant
(22 miles [35.4 km] to the northwest)
- Hamilton County (OH)
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Riverside
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Riverside have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riverside
- Riverside is located in Hamilton County (OH)
- Cotillion Village
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Cotillion Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cotillion Village
- Cotillion Village is located in Hamilton County (OH)
- Delhi Hills
(28 miles [45.1 km] to the northeast)
- Delhi
(28 miles [45.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Delhi. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Delhi
- Delhi is located in Hamilton County (OH)
- Google driving directions:
- From your current location to Delhi
- From Glencoe to Delhi
- Addyston
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Addyston have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Addyston
- Addyston is located in Hamilton County (OH)
- Population from the 2020 Census: 937 people
- Covedale
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Covedale have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Covedale
- Covedale is located in Hamilton County (OH)
- North Bend
(30 miles [48.3 km] to the north)
- Sekitan
(30 miles [48.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Sekitan. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sekitan
- Sekitan is located in Hamilton County (OH)
- Google driving directions:
- From your current location to Sekitan
- From Glencoe to Sekitan
For an expanded list of the communities that are closest to Glencoe, see our County-by-County Page for Glencoe.
Cemeteries Near Glencoe ...
Below are cemeteries that are in the vicinity of Glencoe.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Glencoe covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Glencoe, with the one closest to Glencoe listed first.
- Baldwin Cemetery
(2 miles [3.2 km] to the south)
- Jump to our Gazetteer entry for the Baldwin Cemetery
- Note: The GPS coordinates that we are using for the Baldwin Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Maddox Cemetery
(2 miles [3.2 km] to the southeast)
- Jump to our Gazetteer entry for the Maddox Cemetery
- Note: The GPS coordinates that we are using for the Maddox Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Stewart Cemetery
(2 miles [3.2 km] to the southeast)
- Jump to our Gazetteer entry for the Stewart Cemetery
- Note: The GPS coordinates that we are using for the Stewart Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Crouch Cemetery
(2 miles [3.2 km] to the northwest)
- Ellis Cemetery
(2 miles [3.2 km] to the northwest)
- Poplar Grove IOOF Cemetery
(3 miles [4.8 km] to the south)
- Jump to our Gazetteer entry for the Poplar Grove IOOF Cemetery
- Note: The GPS coordinates that we are using for the Poplar Grove IOOF Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Asa Kemper Cemetery
(3 miles [4.8 km] to the south)
- Jump to our Gazetteer entry for the Asa Kemper Cemetery
- Note: The GPS coordinates that we are using for the Asa Kemper Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Spencer Cemetery
(3 miles [4.8 km] to the northwest)
- Jump to our Gazetteer entry for the Spencer Cemetery
- Note: The GPS coordinates that we are using for the Spencer Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Hamblin Cemetery
(3 miles [4.8 km] to the northwest)
- Connley Cemetery
(4 miles [6.4 km] to the northeast)
- Jump to our Gazetteer entry for the Connley Cemetery
- Note: The GPS coordinates that we are using for the Connley Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Concord Cemetery
(5 miles [8 km] to the north)
- Jump to our Gazetteer entry for the Concord Cemetery
- Note: The GPS coordinates that we are using for the Concord Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Stewart Cemetery
(5 miles [8 km] to the south)
- Jump to our Gazetteer entry for the Stewart Cemetery
- Note: The GPS coordinates that we are using for the Stewart Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Continue List (508 more) ...
- Pettit Cemetery
(5 miles [8 km] to the southeast)
- Jump to our Gazetteer entry for the Pettit Cemetery
- Note: The GPS coordinates that we are using for the Pettit Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Sipple Cemetery
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for the Sipple Cemetery
- Note: The GPS coordinates that we are using for the Sipple Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Delf Cemetery
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for the Delf Cemetery
- Note: The GPS coordinates that we are using for the Delf Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>
The Rand McNally Atlas shows that Glencoe had a population of 300 people in 1895 with a post office and railroad service. In 2020, Glencoe had a population of 365 people.
These communities are listed based on their distance from Glencoe, with the one closest to Glencoe listed first.
- Eagle Hill
(2 miles [3.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Eagle Hill. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Eagle Hill
- Eagle Hill is located in Owen County
- Google driving directions:
- From your current location to Eagle Hill
- From Glencoe to Eagle Hill
- Poplar Grove
(3 miles [4.8 km] to the south)
- Napoleon
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Napoleon have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Napoleon
- Napoleon is located in Gallatin County
- Sparta
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Sparta have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sparta
- Sparta is located in Gallatin County
- Population from the 2020 Census: 273 people
- Jump to TripAdvisor's Tourism page for Sparta <2>
- Elliston
(4 miles [6.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Elliston. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Elliston
- Elliston is located in Grant County
- Google driving directions:
- From your current location to Elliston
- From Glencoe to Elliston
- Bromley
(5 miles [8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Bromley. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bromley
- Bromley is located in Owen County
- Google driving directions:
- From your current location to Bromley
- From Glencoe to Bromley
- Zion Station
(6 miles [9.7 km] to the northeast)
- Warsaw
(6 miles [9.7 km] to the northwest)
- Sanders
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Sanders have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sanders
- Sanders is located in Carroll County
- Population from the 2020 Census: 236 people
- Jump to TripAdvisor's Tourism page for Sanders <2>
- Downingsville
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Downingsville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Downingsville
- Downingsville is located in Grant County
- Florence
(7 miles [11.3 km] to the northwest)
- New Liberty
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for New Liberty have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Liberty
- New Liberty is located in Owen County
- Continue List (14 more) ...
- Delia
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Delia have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Delia
- Delia is located in Grant County
- Patriot
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Patriot have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Patriot
- Patriot is located in Switzerland County (IN)
- Population from the 2020 Census: 212 people
- Jump to TripAdvisor's Tourism page for Patriot <2>
- Ryle
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Ryle have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ryle
- Ryle is located in Gallatin County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Glencoe. See our List of 1890's Communities around Glencoe.
Newspapers Published in Glencoe ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 42 newspapers that have been published in the area around Glencoe.
Although we're unaware of any newspapers that were published in the immediate area of Glencoe, there are papers which were published within 22 miles [35.4 km]<4>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Glencoe.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Glencoe:
- Websites specific to Kentucky
- Pages specific to Gallatin County
- Genealogy information for nearby counties
- Boone County
- Boyd County
- Campbell County
- Carroll County
- Franklin County
- Grant County
- Harrison County
- Henry County
- Jefferson County
- Kenton County
- Owen County
- Pendleton County
- Scott County
- Trimble County
- Dearborn County
- Jefferson County
- Ohio County
- Ripley County
- Switzerland County
- Hamilton County
- Cemetery Information and Directories for Kentucky
Off-the-Road Links ...
Unfortunately, we don't know of a website for Glencoe. If you can help, please contact us through our Feedback Page. The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Glencoe) to Point B.Our distance measurements begin at a specific point in Glencoe. The point we use is located at these GPS coordinates - Latitude: 38.7143, Longitude: -84.8230 |
<5> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<6> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Glencoe, please let us know so that we can improve our accuracy. |
|
|