Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Erlanger had a post office and railroad service. In 2020, Erlanger had a population of 19,393 people.
The following communities are listed based on their distance from Erlanger, with the one closest to Erlanger listed first.
- Florence
(Less than 2 miles to the southwest)
- Jump to our Gazetteer entry for Florence
- Florence is located in Boone County
- Population from the 2020 Census: 33,423 people
- Jump to TripAdvisor's Tourism page for Florence <2>
Google driving directions:
From your current location to Florence
From Erlanger to Florence
- Crescent Springs
(2 miles [3.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Crescent Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crescent Springs
- Crescent Springs is located in Kenton County
- Population from the 2020 Census: 4,138 people
- Jump to TripAdvisor's Tourism page for Crescent Springs <2>
- Maurice
(3 miles [4.8 km] to the east)
- Note: The GPS coordinates that we are using for Maurice have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maurice
- Maurice is located in Kenton County
- Anderson Ferry
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Anderson Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Anderson Ferry
- Anderson Ferry is located in Hamilton County (OH)
- Riverside
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Riverside have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riverside
- Riverside is located in Hamilton County (OH)
- Constance
(4 miles [6.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Constance. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Constance
- Constance is located in Boone County
Google driving directions:
From your current location to Constance
From Erlanger to Constance
- Limaburg
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for Limaburg
- Limaburg is located in Boone County
Google driving directions:
From your current location to Limaburg
From Erlanger to Limaburg
- Mount Saint Joseph
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Mount Saint Joseph have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Saint Joseph
- Mount Saint Joseph is located in Hamilton County (OH)
- Independence
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Independence have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Independence
- Independence is located in Kenton County
- Population from the 2020 Census: 28,903 people
- Jump to TripAdvisor's Tourism page for Independence <2>
- Delhi
(5 miles [8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Delhi. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Delhi
- Delhi is located in Hamilton County (OH)
Google driving directions:
From your current location to Delhi
From Erlanger to Delhi
- Ludlow
(5 miles [8 km] to the northeast)
- Jump to our Gazetteer entry for Ludlow
- Ludlow is located in Kenton County
- Population from the 2020 Census: 4,506 people
- Jump to TripAdvisor's Tourism page for Ludlow <2>
Google driving directions:
From your current location to Ludlow
From Erlanger to Ludlow
- Sedamsville
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Sedamsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sedamsville
- Sedamsville is located in Hamilton County (OH)
- Union
(6 miles [9.7 km] to the southwest)
- Jump to our Gazetteer entry for Union
- Union is located in Boone County
- Population from the 2020 Census: 6,116 people
- Jump to TripAdvisor's Tourism page for Union <2>
Google driving directions:
From your current location to Union
From Erlanger to Union
- Richwood
(6 miles [9.7 km] to the south)
- Wilder
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Wilder have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilder
- Wilder is located in Campbell County
- Population from the 2020 Census: 3,061 people
- Jump to TripAdvisor's Tourism page for Wilder <2>
- Johns Hill
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Johns Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Johns Hill
- Johns Hill is located in Campbell County
- Storrs
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Storrs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Storrs
- Storrs is located in Hamilton County (OH)
- Hebron
(6 miles [9.7 km] to the northwest)
- Burlington
(6 miles [9.7 km] to the west)
- Bank Lick
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Bank Lick have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bank Lick
- Bank Lick is located in Kenton County
- Pool's Creek
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Pool's Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pool's Creek
- Pool's Creek is located in Campbell County
- Newport
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for Newport
- Newport is located in Campbell County
- Population from the 2020 Census: 14,906 people
- Jump to TripAdvisor's Tourism page for Newport <2>
Google driving directions:
From your current location to Newport
From Erlanger to Newport
- Cincinnati
(7 miles [11.3 km] to the northeast)
- Nicholson
(8 miles [12.9 km] to the south)
- Jump to our Gazetteer entry for Nicholson
- Nicholson is located in Kenton County
Google driving directions:
From your current location to Nicholson
From Erlanger to Nicholson
- Staffordsburg
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Staffordsburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Staffordsburg
- Staffordsburg is located in Kenton County
- Ryland
(8 miles [12.9 km] to the southeast)
- Jump to our Gazetteer entry for Ryland
- Ryland is located in Kenton County
Google driving directions:
From your current location to Ryland
From Erlanger to Ryland
- Grant
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Grant have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grant
- Grant is located in Kenton County
- Cold Spring
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Cold Spring have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cold Spring
- Cold Spring is located in Campbell County
- Population from the 2020 Census: 6,628 people
- Jump to TripAdvisor's Tourism page for Cold Spring <2>
- Bellevue
(8 miles [12.9 km] to the northeast)
- Jump to our Gazetteer entry for Bellevue
- Bellevue is located in Campbell County
- Population from the 2020 Census: 5,767 people
- Jump to TripAdvisor's Tourism page for Bellevue <2>
Google driving directions:
From your current location to Bellevue
From Erlanger to Bellevue
- Corryville
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Corryville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Corryville
- Corryville is located in Hamilton County (OH)
- Camp Washington
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Camp Washington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Camp Washington
- Camp Washington is located in Hamilton County (OH)
- Fairmount
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Fairmount have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairmount
- Fairmount is located in Hamilton County (OH)
- Bullittsville
(8 miles [12.9 km] to the northwest)
Off-the-Road Links ...
The official website for Erlanger: www.friendshipcity.com/
The official website for Kenton County: www.kentoncounty.org/
The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Erlanger, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |