|
Nearest Communities to Dant, Listed County-By-County
The purpose of this page is to identify those communities that are closest to Dant, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Dant:
We have great-grandparents who lived in a small community in the northwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.
When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.
Please note that when we give a distance, it's a 'straight-line' distance starting from Dant.<1>
If you're researching your genealogy, we hope that the following information helps.
Dant is located in Marion County.
The following 6 counties adjoin and form the boundaries of Marion County: Boyle, Casey, Larue, Nelson, Taylor & Washington.
Our Gazetteer shows that there are 255 communities within 40 miles [64.4 km]<1> of Dant. Of these communities, 230 are located in counties other than Marion County.
We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.
After starting with the home county for Dant (which is Marion County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Dant
For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.
- Marion County (where Dant resides)
- County Seat for Marion: Lebanon
- Genealogy Websites ...
- Nearest Communities to Dant ...
- These communities are listed by their distance from Dant.
- Saint Francis
(Less than 2 miles to the southeast)
- Note: The GPS coordinates that we are using for Saint Francis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Francis
- Saint Francis is located in Marion County
- Holy Cross
(2 miles [3.2 km] to the north)
- Note: The GPS coordinates that we are using for Holy Cross have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holy Cross
- Holy Cross is located in Marion County
- Loretto
(3 miles [4.8 km] to the east)
- Note: The GPS coordinates that we are using for Loretto have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loretto
- Loretto is located in Marion County
- Population from the 2020 Census: 692 people
- Jump to TripAdvisor's Tourism page for Loretto <4>
- Nerinx
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Nerinx have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nerinx
- Nerinx is located in Marion County
- Gandertown
(4 miles [6.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Gandertown. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Gandertown
- Gandertown is located in Marion County
- Google driving directions:
- From your current location to Gandertown
- From Dant to Gandertown
- Burkes Spring
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Burkes Spring have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burkes Spring
- Burkes Spring is located in Marion County
- Raywick
(5 miles [8 km] to the south)
- Frogtown
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Frogtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Frogtown
- Frogtown is located in Marion County
- Saint Mary
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Saint Mary have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Mary
- Saint Mary is located in Marion County
- Jump to TripAdvisor's Tourism page for Saint Mary <4>
- Saint Joseph
(8 miles [12.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Saint Joseph. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Saint Joseph
- Saint Joseph is located in Marion County
- Google driving directions:
- From your current location to Saint Joseph
- From Dant to Saint Joseph
- Belltown
(10 miles [16.1 km] to the southeast)
- Lebanon
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Lebanon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lebanon
- Lebanon is located in Marion County
- Population from the 2020 Census: 5,733 people
- Jump to TripAdvisor's Tourism page for Lebanon <4>
- Continue List (13 more) ...
- Jessietown
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Jessietown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jessietown
- Jessietown is located in Marion County
- New Market
(12 miles [19.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for New Market. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for New Market
- New Market is located in Marion County
- Google driving directions:
- From your current location to New Market
- From Dant to New Market
- Calvary
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Calvary have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calvary
- Calvary is located in Marion County
- Simstown
(15 miles [24.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Simstown. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Simstown
- Simstown is located in Marion County
- Google driving directions:
- From your current location to Simstown
- From Dant to Simstown
- Greenbriar
(15 miles [24.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Greenbriar. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Greenbriar
- Greenbriar is located in Marion County
- Google driving directions:
- From your current location to Greenbriar
- From Dant to Greenbriar
- Peck Ford
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Peck Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peck Ford
- Peck Ford is located in Marion County
- Poplar Corner
(16 miles [25.7 km] to the east)
- Phillipsburg
(16 miles [25.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Phillipsburg. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Phillipsburg
- Phillipsburg is located in Marion County
- Google driving directions:
- From your current location to Phillipsburg
- From Dant to Phillipsburg
- Penick
(17 miles [27.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Penick. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Penick
- Penick is located in Marion County
- Google driving directions:
- From your current location to Penick
- From Dant to Penick
- Salleetown
(18 miles [29 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Salleetown. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Salleetown
- Salleetown is located in Marion County
- Google driving directions:
- From your current location to Salleetown
- From Dant to Salleetown
- Bradfordsville
(19 miles [30.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Bradfordsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bradfordsville
- Bradfordsville is located in Marion County
- Population from the 2020 Census: 299 people
- Jump to TripAdvisor's Tourism page for Bradfordsville <4>
- Riley
(20 miles [32.2 km] to the east)
- Gravel Switch
(22 miles [35.4 km] to the east)
- Adair County
- County Seat for Adair: Columbia
- Genealogy Websites ...
- Nearest Communities to Dant ...
- These communities are listed by their distance from Dant.
- Feathersburg
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Feathersburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Feathersburg
- Feathersburg is located in Adair County
- Speck
(27 miles [43.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Speck. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Speck
- Speck is located in Adair County
- Google driving directions:
- From your current location to Speck
- From Dant to Speck
- Coburg
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Coburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coburg
- Coburg is located in Adair County
- Casey Creek
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Casey Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Casey Creek
- Casey Creek is located in Adair County
- Knifley
(30 miles [48.3 km] to the southeast)
- Anderson County
- County Seat for Anderson: Lawrenceburg
- Genealogy Websites ...
- Nearest Communities to Dant ...
- These communities are listed by their distance from Dant.
- Sparrow
(25 miles [40.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Sparrow. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Sparrow
- Sparrow is located in Anderson County
- Google driving directions:
- From your current location to Sparrow
- From Dant to Sparrow
- Fairview
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairview
- Fairview is located in Anderson County
- Johnsonville
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Johnsonville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Johnsonville
- Johnsonville is located in Anderson County
- Van Buren
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Buren
- Van Buren is located in Anderson County
- Klondyke
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Klondyke have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Klondyke
- Klondyke is located in Anderson County
- Ashbrook
(30 miles [48.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Ashbrook. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Ashbrook
- Ashbrook is located in Anderson County
- Google driving directions:
- From your current location to Ashbrook
- From Dant to Ashbrook
- Boyle County
- County Seat for Boyle: Danville
- Genealogy Websites ...
- Nearest Communities to Dant ...
- These communities are listed by their distance from Dant.
- Aliceton
(23 miles [37 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Aliceton. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Aliceton
- Aliceton is located in Boyle County
- Google driving directions:
- From your current location to Aliceton
- From Dant to Aliceton
- Craintown
(24 miles [38.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Craintown. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Craintown
- Craintown is located in Boyle County
- Google driving directions:
- From your current location to Craintown
- From Dant to Craintown
- Brumfield
(26 miles [41.8 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Brumfield. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Brumfield
- Brumfield is located in Boyle County
- Google driving directions:
- From your current location to Brumfield
- From Dant to Brumfield
- Forkland
(26 miles [41.8 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Forkland. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Forkland
- Forkland is located in Boyle County
- Google driving directions:
- From your current location to Forkland
- From Dant to Forkland
- Mitchellsburg
(27 miles [43.5 km] to the east)
- Perryville
(27 miles [43.5 km] to the east)
- Parksville
(30 miles [48.3 km] to the east)
- Bullitt County
- County Seat for Bullitt: Shepherdsville
- Genealogy Websites ...
- Nearest Communities to Dant ...
- These communities are listed by their distance from Dant.
- Scuffletown
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Scuffletown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Scuffletown
- Scuffletown is located in Bullitt County
- Lotus
(20 miles [32.2 km] to the north)
- Lebanon Junction
(20 miles [32.2 km] to the northwest)
- Ridgetop
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Ridgetop have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ridgetop
- Ridgetop is located in Bullitt County
- Poplar Level
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Poplar Level have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Poplar Level
- Poplar Level is located in Bullitt County
- Brownington
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Brownington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brownington
- Brownington is located in Bullitt County
- Belmont
(22 miles [35.4 km] to the northwest)
- Clermont
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Clermont have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clermont
- Clermont is located in Bullitt County
- Jump to TripAdvisor's Tourism page for Clermont <4>
- Hobbs
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Hobbs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hobbs
- Hobbs is located in Bullitt County
- Solitude
(23 miles [37 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Solitude. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Solitude
- Solitude is located in Bullitt County
- Google driving directions:
- From your current location to Solitude
- From Dant to Solitude
- Limestone Springs
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Limestone Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Limestone Springs
- Limestone Springs is located in Bullitt County
- Bardstown Junction
(24 miles [38.6 km] to the northwest)
- Continue List (10 more) ...
- Cedar Grove
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Cedar Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Grove
- Cedar Grove is located in Bullitt County
- Smithville
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Smithville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Smithville
- Smithville is located in Bullitt County
- Beech Grove
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Beech Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beech Grove
- Beech Grove is located in Bullitt County
- Pitt's Point
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Pitt's Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pitt's Point
- Pitt's Point is located in Bullitt County
- Salt River
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Salt River have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Salt River
- Salt River is located in Bullitt County
- Shepherdsville
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Shepherdsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shepherdsville
- Shepherdsville is located in Bullitt County
- Population from the 2020 Census: 12,297 people
- Jump to TripAdvisor's Tourism page for Shepherdsville <4>
- Mount Washington
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Mount Washington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Washington
- Mount Washington is located in Bullitt County
- Population from the 2020 Census: 14,907 people
- Jump to TripAdvisor's Tourism page for Mount Washington <4>
- Gap in Knob
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Gap in Knob have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gap in Knob
- Gap in Knob is located in Bullitt County
- Hillview
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Hillview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hillview
- Hillview is located in Bullitt County
- Population from the 2020 Census: 9,192 people
- Hebron Estates
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Hebron Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hebron Estates
- Hebron Estates is located in Bullitt County
- Population from the 2020 Census: 1,185 people
- Casey County
- County Seat for Casey: Liberty
- Genealogy Websites ...
- Nearest Communities to Dant ...
- These communities are listed by their distance from Dant.
- Bass
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Bass have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bass
- Bass is located in Casey County
- Jacktown
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Jacktown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jacktown
- Jacktown is located in Casey County
- Chilton
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Chilton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chilton
- Chilton is located in Casey County
- Atterson
(29 miles [46.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Atterson. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Atterson
- Atterson is located in Casey County
- Google driving directions:
- From your current location to Atterson
- From Dant to Atterson
- Peytons Store
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Peytons Store have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peytons Store
- Peytons Store is located in Casey County
- Green County
- County Seat for Green: Greensburg
- Genealogy Websites ...
- Nearest Communities to Dant ...
- These communities are listed by their distance from Dant.
- Wards
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Wards have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wards
- Wards is located in Green County
- Bloyd
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Bloyd have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bloyd
- Bloyd is located in Green County
- Coakley
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Coakley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coakley
- Coakley is located in Green County
- Allendale
(19 miles [30.6 km] to the south)
- Bloyds Crossing
(20 miles [32.2 km] to the south)
- Note: The GPS coordinates that we are using for Bloyds Crossing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bloyds Crossing
- Bloyds Crossing is located in Green County
- Summersville
(21 miles [33.8 km] to the south)
- Black Gnat
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Black Gnat have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Black Gnat
- Black Gnat is located in Green County
- Lobb
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Lobb have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lobb
- Lobb is located in Green County
- Gabe
(23 miles [37 km] to the south)
- Hudgins
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Hudgins have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hudgins
- Hudgins is located in Green County
- Bluff Boom
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Bluff Boom have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bluff Boom
- Bluff Boom is located in Green County
- Whitewood
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Whitewood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whitewood
- Whitewood is located in Green County
- Continue List (8 more) ...
- Eve
(25 miles [40.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Eve have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eve
- Eve is located in Green County
- Greensburg
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Greensburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greensburg
- Greensburg is located in Green County
- Population from the 2020 Census: 2,057 people
- Jump to TripAdvisor's Tourism page for Greensburg <4>
- Roachville
(27 miles [43.5 km] to the south)
- Webbs
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Webbs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Webbs
- Webbs is located in Green County
- Donansburg
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Donansburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Donansburg
- Donansburg is located in Green County
- Grab
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Grab have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grab
- Grab is located in Green County
- Thurlow
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Thurlow have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Thurlow
- Thurlow is located in Green County
- Gresham
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Gresham have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gresham
- Gresham is located in Green County
- Hardin County
- County Website: www.hcky.org/
- County Seat for Hardin: Elizabethtown
- Genealogy Websites ...
- Nearest Communities to Dant ...
- These communities are listed by their distance from Dant.
- Younger Creek
(16 miles [25.7 km] to the northwest)
- Booth
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Booth have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Booth
- Booth is located in Hardin County
- Colesburg
(20 miles [32.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Colesburg. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Colesburg
- Colesburg is located in Hardin County
- Google driving directions:
- From your current location to Colesburg
- From Dant to Colesburg
- Indian Hills
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Indian Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Indian Hills
- Indian Hills is located in Hardin County
- Tunnel Hills
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Tunnel Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tunnel Hills
- Tunnel Hills is located in Hardin County
- Crest
(22 miles [35.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Crest. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Crest
- Crest is located in Hardin County
- Google driving directions:
- From your current location to Crest
- From Dant to Crest
- Glendale Junction
(22 miles [35.4 km] to the west)
- Elizabethtown
(23 miles [37 km] to the west)
- Gaithers
(24 miles [38.6 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Gaithers. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Gaithers
- Gaithers is located in Hardin County
- Google driving directions:
- From your current location to Gaithers
- From Dant to Gaithers
- Glendale
(24 miles [38.6 km] to the west)
- Nolin
(24 miles [38.6 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Nolin. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Nolin
- Nolin is located in Hardin County
- Google driving directions:
- From your current location to Nolin
- From Dant to Nolin
- Sonora
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Sonora have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sonora
- Sonora is located in Hardin County
- Population from the 2020 Census: 523 people
- Jump to TripAdvisor's Tourism page for Sonora <4>
- Continue List (16 more) ...
- Upton
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Upton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Upton
- Upton is located in Hardin County
- Population from the 2020 Census: 691 people
- Jump to TripAdvisor's Tourism page for Upton <4>
- Long View
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Long View have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Long View
- Long View is located in Hardin County
- Cecilia
(27 miles [43.5 km] to the west)
- Rogersville
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Rogersville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rogersville
- Rogersville is located in Hardin County
- Kraft
(28 miles [45.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Kraft. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Kraft
- Kraft is located in Hardin County
- Google driving directions:
- From your current location to Kraft
- From Dant to Kraft
- Saint John
(28 miles [45.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Saint John. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Saint John
- Saint John is located in Hardin County
- Google driving directions:
- From your current location to Saint John
- From Dant to Saint John
- Star Mills
(28 miles [45.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Star Mills. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Star Mills
- Star Mills is located in Hardin County
- Google driving directions:
- From your current location to Star Mills
- From Dant to Star Mills
- Radcliff
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Radcliff have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Radcliff
- Radcliff is located in Hardin County
- Population from the 2020 Census: 22,923 people
- Jump to TripAdvisor's Tourism page for Radcliff <4>
- Vine Grove Junction
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Vine Grove Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vine Grove Junction
- Vine Grove Junction is located in Hardin County
- Hansbrough
(29 miles [46.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Hansbrough. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Hansbrough
- Hansbrough is located in Hardin County
- Google driving directions:
- From your current location to Hansbrough
- From Dant to Hansbrough
- Rineyville
(29 miles [46.7 km] to the west)
- Flint Hill
(30 miles [48.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Flint Hill. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Flint Hill
- Flint Hill is located in Hardin County
- Google driving directions:
- From your current location to Flint Hill
- From Dant to Flint Hill
- Franklin Cross Roads
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Franklin Cross Roads have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Franklin Cross Roads
- Franklin Cross Roads is located in Hardin County
- Harcourt
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Harcourt have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harcourt
- Harcourt is located in Hardin County
- Old Stephensburg
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Old Stephensburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Old Stephensburg
- Old Stephensburg is located in Hardin County
- Stephensburg
(30 miles [48.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Stephensburg. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Stephensburg
- Stephensburg is located in Hardin County
- Google driving directions:
- From your current location to Stephensburg
- From Dant to Stephensburg
- Hart County
- County Seat for Hart: Munfordville
- Genealogy Websites ...
- Nearest Communities to Dant ...
- These communities are listed by their distance from Dant.
- Hammonville
(24 miles [38.6 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Hammonville. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Hammonville
- Hammonville is located in Hart County
- Google driving directions:
- From your current location to Hammonville
- From Dant to Hammonville
- Jonesville
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Jonesville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jonesville
- Jonesville is located in Hart County
- Pike View
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Pike View have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pike View
- Pike View is located in Hart County
- Powder Mill
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Powder Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Powder Mill
- Powder Mill is located in Hart County
- High Hickory
(25 miles [40.2 km] to the southwest)
- Note: The GPS coordinates that we are using for High Hickory have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for High Hickory
- High Hickory is located in Hart County
- Linwood
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Linwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Linwood
- Linwood is located in Hart County
- Wabash
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Wabash have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wabash
- Wabash is located in Hart County
- Rio
(27 miles [43.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Rio. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Rio
- Rio is located in Hart County
- Google driving directions:
- From your current location to Rio
- From Dant to Rio
- Defries
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Defries have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Defries
- Defries is located in Hart County
- Continue List (6 more) ...
- Vento
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Vento have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vento
- Vento is located in Hart County
- Canmer
(29 miles [46.7 km] to the southwest)
- Glen Lily
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Glen Lily have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glen Lily
- Glen Lily is located in Hart County
- Hinesdale
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Hinesdale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hinesdale
- Hinesdale is located in Hart County
- Bonnieville
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Bonnieville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bonnieville
- Bonnieville is located in Hart County
- Population from the 2020 Census: 260 people
- Jump to TripAdvisor's Tourism page for Bonnieville <4>
- Monroe
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Monroe have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monroe
- Monroe is located in Hart County
- Larue County
- County Website: www.laruecounty.net
- County Seat for Larue: Hodgenville
- Genealogy Websites ...
- Nearest Communities to Dant ...
- These communities are listed by their distance from Dant.
- Gleanings
(6 miles [9.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Gleanings. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Gleanings
- Gleanings is located in Larue County
- Google driving directions:
- From your current location to Gleanings
- From Dant to Gleanings
- Athertonville
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Athertonville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Athertonville
- Athertonville is located in Larue County
- Attilla
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Attilla have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Attilla
- Attilla is located in Larue County
- Lyons
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Lyons have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lyons
- Lyons is located in Larue County
- Ginseng
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Ginseng have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ginseng
- Ginseng is located in Larue County
- White City ‑ Historic
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for White City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White City
- White City is located in Larue County
- Leafdale
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Leafdale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leafdale
- Leafdale is located in Larue County
- Jericho
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Jericho have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jericho
- Jericho is located in Larue County
- Roanoke
(13 miles [20.9 km] to the west)
- Buffalo
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Buffalo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buffalo
- Buffalo is located in Larue County
- South Buffalo
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for South Buffalo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Buffalo
- South Buffalo is located in Larue County
- Hodgenville
(16 miles [25.7 km] to the west)
- Continue List (8 more) ...
- Boundary Oak
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Boundary Oak have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boundary Oak
- Boundary Oak is located in Larue County
- Mount Sherman
(17 miles [27.4 km] to the southwest)
- Mathers Mill
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Mathers Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mathers Mill
- Mathers Mill is located in Larue County
- Tonieville
(18 miles [29 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Tonieville. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Tonieville
- Tonieville is located in Larue County
- Google driving directions:
- From your current location to Tonieville
- From Dant to Tonieville
- Magnolia
(20 miles [32.2 km] to the southwest)
- Tanner
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Tanner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tanner
- Tanner is located in Larue County
- Maxine
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Maxine have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maxine
- Maxine is located in Larue County
- Talley
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Talley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Talley
- Talley is located in Larue County
- Mercer County
- County Seat for Mercer: Harrodsburg
- Genealogy Websites ...
- Nearest Communities to Dant ...
- These communities are listed by their distance from Dant.
- Deep Creek
(24 miles [38.6 km] to the east)
- Note: The GPS coordinates that we are using for Deep Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Deep Creek
- Deep Creek is located in Mercer County
- Stewart
(24 miles [38.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Stewart. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Stewart
- Stewart is located in Mercer County
- Google driving directions:
- From your current location to Stewart
- From Dant to Stewart
- Bushtown
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Bushtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bushtown
- Bushtown is located in Mercer County
- Cornishville
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Cornishville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cornishville
- Cornishville is located in Mercer County
- Dixville
(28 miles [45.1 km] to the east)
- Tablow
(28 miles [45.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Tablow. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Tablow
- Tablow is located in Mercer County
- Google driving directions:
- From your current location to Tablow
- From Dant to Tablow
- Duncan
(29 miles [46.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Duncan. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Duncan
- Duncan is located in Mercer County
- Google driving directions:
- From your current location to Duncan
- From Dant to Duncan
- Nevada
(30 miles [48.3 km] to the east)
- Dugansville
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Dugansville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dugansville
- Dugansville is located in Mercer County
- Nelson County
- County Website: www.nelsoncountyky.com
- County Seat for Nelson: Bardstown
- Genealogy Websites ...
- Nearest Communities to Dant ...
- These communities are listed by their distance from Dant.
- New Hope
(2 miles [3.2 km] to the west)
- Gethsemane
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Gethsemane have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gethsemane
- Gethsemane is located in Nelson County
- Greenbrier
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Greenbrier have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenbrier
- Greenbrier is located in Nelson County
- Blue Gap
(6 miles [9.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Blue Gap. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Blue Gap
- Blue Gap is located in Nelson County
- Google driving directions:
- From your current location to Blue Gap
- From Dant to Blue Gap
- Culvertown
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Culvertown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Culvertown
- Culvertown is located in Nelson County
- Balltown
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Balltown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Balltown
- Balltown is located in Nelson County
- New Haven
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for New Haven have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Haven
- New Haven is located in Nelson County
- Population from the 2020 Census: 900 people
- Jump to TripAdvisor's Tourism page for New Haven <4>
- Howardstown
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Howardstown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howardstown
- Howardstown is located in Nelson County
- Stiles
(9 miles [14.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Stiles. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Stiles
- Stiles is located in Nelson County
- Google driving directions:
- From your current location to Stiles
- From Dant to Stiles
- Botland
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Botland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Botland
- Botland is located in Nelson County
- Bardstown
(11 miles [17.7 km] to the north)
- Cravens
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Cravens have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cravens
- Cravens is located in Nelson County
- Continue List (17 more) ...
- Bellwood
(12 miles [19.3 km] to the northwest)
- Nelsonville
(12 miles [19.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Nelsonville. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Nelsonville
- Nelsonville is located in Nelson County
- Google driving directions:
- From your current location to Nelsonville
- From Dant to Nelsonville
- East Bardstown
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for East Bardstown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Bardstown
- East Bardstown is located in Nelson County
- Withrow
(13 miles [20.9 km] to the north)
- Woodlawn
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Woodlawn have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodlawn
- Woodlawn is located in Nelson County
- Bourbon Springs
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Bourbon Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bourbon Springs
- Bourbon Springs is located in Nelson County
- Nazareth
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Nazareth have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nazareth
- Nazareth is located in Nelson County
- Hunters
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Hunters have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hunters
- Hunters is located in Nelson County
- Boston
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Boston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boston
- Boston is located in Nelson County
- Jump to TripAdvisor's Tourism page for Boston <4>
- Samuels
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Samuels have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Samuels
- Samuels is located in Nelson County
- Coxs Creek
(18 miles [29 km] to the north)
- Deatsville
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for Deatsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Deatsville
- Deatsville is located in Nelson County
- Bloomfield
(20 miles [32.2 km] to the north)
- Fairfield
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Fairfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairfield
- Fairfield is located in Nelson County
- Population from the 2020 Census: 113 people
- Lenore
(20 miles [32.2 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Lenore. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Lenore
- Lenore is located in Nelson County
- Google driving directions:
- From your current location to Lenore
- From Dant to Lenore
- Chaplin
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Chaplin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chaplin
- Chaplin is located in Nelson County
- Jump to TripAdvisor's Tourism page for Chaplin <4>
- Highgrove
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Highgrove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Highgrove
- Highgrove is located in Nelson County
- Spencer County
- County Seat for Spencer: Taylorsville
- Genealogy Websites ...
- Nearest Communities to Dant ...
- These communities are listed by their distance from Dant.
- Wakefield
(24 miles [38.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Wakefield. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Wakefield
- Wakefield is located in Spencer County
- Google driving directions:
- From your current location to Wakefield
- From Dant to Wakefield
- Taylorsville
(27 miles [43.5 km] to the north)
- Waterford
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Waterford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waterford
- Waterford is located in Spencer County
- Crenshaw
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Crenshaw have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crenshaw
- Crenshaw is located in Spencer County
- Yoder
(29 miles [46.7 km] to the north)
- Taylor County
- County Seat for Taylor: Campbellsville
- Genealogy Websites ...
- Nearest Communities to Dant ...
- These communities are listed by their distance from Dant.
- Maple
(12 miles [19.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Maple. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Maple
- Maple is located in Taylor County
- Google driving directions:
- From your current location to Maple
- From Dant to Maple
- Willowtown
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Willowtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willowtown
- Willowtown is located in Taylor County
- Badger
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Badger have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Badger
- Badger is located in Taylor County
- Finley
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Finley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Finley
- Finley is located in Taylor County
- Hibernia
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Hibernia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hibernia
- Hibernia is located in Taylor County
- White Rose
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for White Rose have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Rose
- White Rose is located in Taylor County
- Hobson
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Hobson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hobson
- Hobson is located in Taylor County
- Saloma
(15 miles [24.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Saloma. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Saloma
- Saloma is located in Taylor County
- Google driving directions:
- From your current location to Saloma
- From Dant to Saloma
- Durhamtown
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Durhamtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Durhamtown
- Durhamtown is located in Taylor County
- Mac
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Mac have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mac
- Mac is located in Taylor County
- Pitman
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Pitman have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pitman
- Pitman is located in Taylor County
- Spurlington
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Spurlington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spurlington
- Spurlington is located in Taylor County
- Continue List (16 more) ...
- Bengal
(19 miles [30.6 km] to the south)
- Sweeneyville
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Sweeneyville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sweeneyville
- Sweeneyville is located in Taylor County
- Campbellsville
(20 miles [32.2 km] to the south)
- Note: The GPS coordinates that we are using for Campbellsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Campbellsville
- Campbellsville is located in Taylor County
- Population from the 2020 Census: 11,430 people
- Jump to TripAdvisor's Tourism page for Campbellsville <4>
- Arista
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Arista have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arista
- Arista is located in Taylor County
- Wooleyville
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Wooleyville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wooleyville
- Wooleyville is located in Taylor County
- South Campbellsville
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for South Campbellsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Campbellsville
- South Campbellsville is located in Taylor County
- Wright's
(22 miles [35.4 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Wright's. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Wright's
- Wright's is located in Taylor County
- Google driving directions:
- From your current location to Wright's
- From Dant to Wright's
- Acton
(22 miles [35.4 km] to the southeast)
- Mannsville
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Mannsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mannsville
- Mannsville is located in Taylor County
- Merrimac
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Merrimac have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Merrimac
- Merrimac is located in Taylor County
- Atchison
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Atchison have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Atchison
- Atchison is located in Taylor County
- Hatcher
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Hatcher have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hatcher
- Hatcher is located in Taylor County
- Elk Horn
(24 miles [38.6 km] to the southeast)
- Burdick
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Burdick have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burdick
- Burdick is located in Taylor County
- Yuma
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Yuma have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Yuma
- Yuma is located in Taylor County
- Romine
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Romine have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Romine
- Romine is located in Taylor County
- Washington County
- County Seat for Washington: Springfield
- Genealogy Websites ...
- Nearest Communities to Dant ...
- These communities are listed by their distance from Dant.
- Manton
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Manton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manton
- Manton is located in Washington County
- Bearwallow
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Bearwallow have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bearwallow
- Bearwallow is located in Washington County
- Cisselville
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Cisselville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cisselville
- Cisselville is located in Washington County
- Fredericktown
(10 miles [16.1 km] to the northeast)
- Croakes
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Croakes have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Croakes
- Croakes is located in Washington County
- Saint Catharine
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Saint Catharine have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Catharine
- Saint Catharine is located in Washington County
- Briartown
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Briartown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Briartown
- Briartown is located in Washington County
- Jimtown
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Jimtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jimtown
- Jimtown is located in Washington County
- Springfield
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Springfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springfield
- Springfield is located in Washington County
- Population from the 2020 Census: 2,987 people
- Jump to TripAdvisor's Tourism page for Springfield <4>
- Booker
(13 miles [20.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Booker. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Booker
- Booker is located in Washington County
- Google driving directions:
- From your current location to Booker
- From Dant to Booker
- Valley Hill
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Valley Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Valley Hill
- Valley Hill is located in Washington County
- Maud
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Maud have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maud
- Maud is located in Washington County
- Continue List (19 more) ...
- Mooresville
(15 miles [24.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Mooresville. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Mooresville
- Mooresville is located in Washington County
- Google driving directions:
- From your current location to Mooresville
- From Dant to Mooresville
- Rineltown
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Rineltown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rineltown
- Rineltown is located in Washington County
- Hardesty
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Hardesty have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hardesty
- Hardesty is located in Washington County
- Litsey
(17 miles [27.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Litsey. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Litsey
- Litsey is located in Washington County
- Google driving directions:
- From your current location to Litsey
- From Dant to Litsey
- Pleasant Grove
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Pleasant Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Grove
- Pleasant Grove is located in Washington County
- Texas
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Texas have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Texas
- Texas is located in Washington County
- Thompsonville
(18 miles [29 km] to the east)
- Polin
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Polin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Polin
- Polin is located in Washington County
- Brush Grove
(20 miles [32.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Brush Grove. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Brush Grove
- Brush Grove is located in Washington County
- Google driving directions:
- From your current location to Brush Grove
- From Dant to Brush Grove
- Pottsville
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Pottsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pottsville
- Pottsville is located in Washington County
- Willisburg
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Willisburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willisburg
- Willisburg is located in Washington County
- Population from the 2020 Census: 282 people
- Jump to TripAdvisor's Tourism page for Willisburg <4>
- Mackville
(22 miles [35.4 km] to the east)
- Pulliam
(22 miles [35.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Pulliam. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Pulliam
- Pulliam is located in Washington County
- Google driving directions:
- From your current location to Pulliam
- From Dant to Pulliam
- Jenkinsville
(23 miles [37 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Jenkinsville. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Jenkinsville
- Jenkinsville is located in Washington County
- Google driving directions:
- From your current location to Jenkinsville
- From Dant to Jenkinsville
- Tatham Springs
(24 miles [38.6 km] to the northeast)
- Battle
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Battle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Battle
- Battle is located in Washington County
- Cardwell
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Cardwell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cardwell
- Cardwell is located in Washington County
- Sharpsville
(26 miles [41.8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Sharpsville. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Sharpsville
- Sharpsville is located in Washington County
- Google driving directions:
- From your current location to Sharpsville
- From Dant to Sharpsville
- Seaville
(28 miles [45.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Seaville. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Seaville
- Seaville is located in Washington County
- Google driving directions:
- From your current location to Seaville
- From Dant to Seaville
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Dant) to Point B.Our distance measurements begin at a specific point in Dant. The point we use is located at these GPS coordinates - Latitude: 37.6364, Longitude: -85.4563 In this case, the coordinates for Dant have been provided by the Geographic Names Information System (GNIS). |
<2> | Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.
We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.
Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<5> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|