Welcome to Mathers Mill ...
Mathers Mill is located in Larue County<1>.
A typical abbreviation for Mathers Mill: Mathers Ml. (or less commonly used: Mathers Mll.)
See our Genealogy Helper Page for Mathers Mill for more information about variations on the name of Mathers Mill.
Mathers Mill is 690 feet [210 m] above sea level.<2>.
Time Zone: Mathers Mill lies in the Eastern Time Zone (EST/EDT) and observes daylight saving time
Note: If you travel south from Mathers Mill (for example, toward Hiseville), you will soon leave Eastern Time and cross into the Central Time Zone (CST/CDT).
Area Codes for Mathers Mill: 270 & 364<3>
Communities near Mathers Mill ...
We have created a list of 10 communities that are near Mathers Mill.
- Elizabethtown
(12 miles [19.3 km] to the northwest)- Jump to our Gazetteer entry for Elizabethtown
- Elizabethtown is located in Hardin County
- Population from the 2020 Census: 30,331 people
- Jump to TripAdvisor's Tourism page for Elizabethtown <4>
- Munfordville
(19 miles [30.6 km] to the south)- Note: The GPS coordinates that we are using for Munfordville have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Munfordville
- Munfordville is located in Hart County
- Population from the 2020 Census: 1,660 people
- Jump to TripAdvisor's Tourism page for Munfordville <4>
- New Haven
(12 miles [19.3 km] to the northeast)- Note: The GPS coordinates that we are using for New Haven have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Haven
- New Haven is located in Nelson County
- Population from the 2020 Census: 900 people
- Jump to TripAdvisor's Tourism page for New Haven <4>
- Upton
(8 miles [12.9 km] to the southwest)- Note: The GPS coordinates that we are using for Upton have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Upton
- Upton is located in Hardin County
- Population from the 2020 Census: 691 people
- Jump to TripAdvisor's Tourism page for Upton <4>
- Sonora
(6 miles [9.7 km] to the west)- Note: The GPS coordinates that we are using for Sonora have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sonora
- Sonora is located in Hardin County
- Population from the 2020 Census: 523 people
- Jump to TripAdvisor's Tourism page for Sonora <4>
- Bonnieville
(13 miles [20.9 km] to the southwest)- Note: The GPS coordinates that we are using for Bonnieville have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bonnieville
- Bonnieville is located in Hart County
- Population from the 2020 Census: 260 people
- Jump to TripAdvisor's Tourism page for Bonnieville <4>
- Raywick
(18 miles [29 km] to the east)- Jump to our Gazetteer entry for Raywick
- Raywick is located in Marion County
- Population from the 2020 Census: 132 people
- Jump to TripAdvisor's Tourism page for Raywick <4>
- Buffalo
(4 miles [6.4 km] to the southeast) - Tonieville
(4 miles [6.4 km] to the north)- Note: We haven't been able to verify our GPS coordinates for Tonieville. Although the coordinates have been estimated, they should be in the vicinity.<6>
- Jump to our Gazetteer entry for Tonieville
- Tonieville is located in Larue County
- Glendale Junction
(6 miles [9.7 km] to the northwest)- Jump to our Gazetteer entry for Glendale Junction
- Glendale Junction is located in Hardin County
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Mathers Mill. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Mathers Mill.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Mathers Mill. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Mathers Mill.
We also have a detailed list of newspapers that have been published in the area around Mathers Mill. See our Newspapers Page for Mathers Mill.
TripAdvisor Tourism Pages for Mathers Mill ...
Looking for more information about Mathers Mill? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.
While we are unaware of a Tourism page that is specific to Mathers Mill, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Mathers Mill.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Mathers Mill. If you can help, please contact us through our Feedback Page.
The official website for Larue County: www.laruecounty.net
The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
| <1> | If you're interested in how the shape of Kentucky's counties, including Larue, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <2> | The elevation is an estimate for the area around Mathers Mill - it will be higher in some places and lower in others. |
| <3> | When there's a risk of an area code running out of phone numbers, an 'Overlay Area Code' is created that has the same geographic boundaries as the existing area code. In this case, the 270 code has been Overlayed with the 364 area code. New phone numbers in the Mathers Mill area will be assigned with one of these codes: 270 or 364. As a result, placing a call in the Mathers Mill area will require 10-digit dialing (where you enter both the area code and then the phone number). |
| <4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <6> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |