RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Kentucky >> Adair County >> Breeding >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Kentucky

The Commemorative Quarter for Kentucky





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Breeding (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Breeding. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Breeding is located in Adair County.

To see how the shape of Kentucky's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Adair County: Casey, Cumberland, Green, Metcalfe, Russell & Taylor.

Below are the counties that are near Breeding. For each of these counties, we show a sample of those communities that are closest to Breeding:

  • Adair County     (The home county of Breeding)
    • The following are listed by their distance from Breeding, with the one closest to Breeding listed first.
    • Toria
      (2 miles [3.2 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Toria. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Toria
      • Toria is located in Adair County
      • Google driving directions:
      • From your current location to Toria
      • From Breeding to Toria
    • Sparksville
      (3 miles [4.8 km] to the northeast)
    • Nell
      (4 miles [6.4 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Nell. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Nell
      • Nell is located in Adair County
      • Google driving directions:
      • From your current location to Nell
      • From Breeding to Nell
    • Weed
      (5 miles [8 km] to the north)
    • Chance
      (6 miles [9.7 km] to the east)
    • Gradyville
      (7 miles [11.3 km] to the north)
      • Note: The GPS coordinates that we are using for Gradyville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gradyville
      • Gradyville is located in Adair County
    • Flatwood
      (7 miles [11.3 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Flatwood. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Flatwood
      • Flatwood is located in Adair County
      • Google driving directions:
      • From your current location to Flatwood
      • From Breeding to Flatwood
    • Inroad
      (8 miles [12.9 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Inroad. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Inroad
      • Inroad is located in Adair County
      • Google driving directions:
      • From your current location to Inroad
      • From Breeding to Inroad
    • Fairplay
      (8 miles [12.9 km] to the northeast)
    • Cundiff
      (9 miles [14.5 km] to the east)
    • Bliss
      (9 miles [14.5 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Bliss. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Bliss
      • Bliss is located in Adair County
      • Google driving directions:
      • From your current location to Bliss
      • From Breeding to Bliss
    • Gadberry
      (9 miles [14.5 km] to the northeast)
    • Glens Fork
      (10 miles [16.1 km] to the east)
  • Barren County
    • The following are listed by their distance from Breeding, with the one closest to Breeding listed first.
    • Kino
      (18 miles [29 km] to the west)
    • Eighty Eight
      (19 miles [30.6 km] to the west)
      • Note: The GPS coordinates that we are using for Eighty Eight have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Eighty Eight
      • Eighty Eight is located in Barren County
    • Nobob
      (19 miles [30.6 km] to the west)
    • Slick Rock
      (20 miles [32.2 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Slick Rock. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Slick Rock
      • Slick Rock is located in Barren County
      • Google driving directions:
      • From your current location to Slick Rock
      • From Breeding to Slick Rock
    • Park
      (22 miles [35.4 km] to the northwest)
    • Hiseville
      (23 miles [37 km] to the northwest)
    • Coral Hill
      (24 miles [38.6 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Coral Hill. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Coral Hill
      • Coral Hill is located in Barren County
      • Google driving directions:
      • From your current location to Coral Hill
      • From Breeding to Coral Hill
    • Glasgow
      (26 miles [41.8 km] to the west)
    • Etoile
      (27 miles [43.5 km] to the west)
      • Note: The GPS coordinates that we are using for Etoile have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Etoile
      • Etoile is located in Barren County
    • Oil City
      (30 miles [48.3 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Oil City. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Oil City
      • Oil City is located in Barren County
      • Google driving directions:
      • From your current location to Oil City
      • From Breeding to Oil City
  • Casey County
    • The following are listed by their distance from Breeding, with the one closest to Breeding listed first.
    • Honey Acre
      (27 miles [43.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Honey Acre have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Honey Acre
      • Honey Acre is located in Casey County
    • Dunnville
      (28 miles [45.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Dunnville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dunnville
      • Dunnville is located in Casey County
    • Creston
      (30 miles [48.3 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Creston. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Creston
      • Creston is located in Casey County
      • Google driving directions:
      • From your current location to Creston
      • From Breeding to Creston
    • Rheber
      (30 miles [48.3 km] to the northeast)
  • Clinton County
    • The following are listed by their distance from Breeding, with the one closest to Breeding listed first.
    • Ida
      (19 miles [30.6 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Ida. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Ida
      • Ida is located in Clinton County
      • Google driving directions:
      • From your current location to Ida
      • From Breeding to Ida
    • Browns Crossroads
      (21 miles [33.8 km] to the southeast)
    • Cumberland City
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Cumberland City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cumberland City
      • Cumberland City is located in Clinton County
    • Albany
      (24 miles [38.6 km] to the southeast)
    • Alpha
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Alpha have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Alpha
      • Alpha is located in Clinton County
    • Savage
      (28 miles [45.1 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Savage. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Savage
      • Savage is located in Clinton County
      • Google driving directions:
      • From your current location to Savage
      • From Breeding to Savage
    • Static
      (30 miles [48.3 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Static. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Static
      • Static is located in Clinton County
      • Google driving directions:
      • From your current location to Static
      • From Breeding to Static
  • Cumberland County
    • The following are listed by their distance from Breeding, with the one closest to Breeding listed first.
    • Waterview
      (9 miles [14.5 km] to the south)
    • Bakerton
      (9 miles [14.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Bakerton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bakerton
      • Bakerton is located in Cumberland County
    • Marrowbone
      (9 miles [14.5 km] to the southwest)
    • Grider
      (10 miles [16.1 km] to the south)
    • Dubre
      (10 miles [16.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Dubre have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dubre
      • Dubre is located in Cumberland County
    • Dougan Town
      (11 miles [17.7 km] to the south)
      • Note: The GPS coordinates that we are using for Dougan Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dougan Town
      • Dougan Town is located in Cumberland County
    • Burkesville
      (12 miles [19.3 km] to the south)
      • Note: The GPS coordinates that we are using for Burkesville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Burkesville
      • Burkesville is located in Cumberland County
      • Population from the 2020 Census: 1,437 people
      • Jump to TripAdvisor's Tourism page for Burkesville <3>
    • Leslie
      (12 miles [19.3 km] to the south)
    • Cloyds Landing
      (14 miles [22.5 km] to the south)
  • Green County
  • Hart County
    • The following are listed by their distance from Breeding, with the one closest to Breeding listed first.
    • Three Springs
      (22 miles [35.4 km] to the northwest)
    • Pascal
      (24 miles [38.6 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Pascal. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Pascal
      • Pascal is located in Hart County
      • Google driving directions:
      • From your current location to Pascal
      • From Breeding to Pascal
    • Bunnell Crossing
      (27 miles [43.5 km] to the northwest)
    • Hardyville
      (28 miles [45.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Hardyville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hardyville
      • Hardyville is located in Hart County
    • Canmer
      (29 miles [46.7 km] to the northwest)
    • Horse Cave
      (30 miles [48.3 km] to the northwest)
    • Rio
      (30 miles [48.3 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Rio. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Rio
      • Rio is located in Hart County
      • Google driving directions:
      • From your current location to Rio
      • From Breeding to Rio
  • Metcalfe County
  • Monroe County
    • The following are listed by their distance from Breeding, with the one closest to Breeding listed first.
    • Meshack
      (16 miles [25.7 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Meshack. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Meshack
      • Meshack is located in Monroe County
      • Google driving directions:
      • From your current location to Meshack
      • From Breeding to Meshack
    • Martinsburg
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Martinsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Martinsburg
      • Martinsburg is located in Monroe County
    • Forkton
      (21 miles [33.8 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Forkton. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Forkton
      • Forkton is located in Monroe County
      • Google driving directions:
      • From your current location to Forkton
      • From Breeding to Forkton
    • Tompkinsville
      (22 miles [35.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Tompkinsville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tompkinsville
      • Tompkinsville is located in Monroe County
      • Population from the 2020 Census: 2,229 people
      • Jump to TripAdvisor's Tourism page for Tompkinsville <3>
    • Hestand
      (23 miles [37 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Hestand. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Hestand
      • Hestand is located in Monroe County
      • Google driving directions:
      • From your current location to Hestand
      • From Breeding to Hestand
    • Mount Hermon
      (23 miles [37 km] to the southwest)
    • Mud Lick
      (23 miles [37 km] to the southwest)
    • Boles
      (26 miles [41.8 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Boles. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Boles
      • Boles is located in Monroe County
      • Google driving directions:
      • From your current location to Boles
      • From Breeding to Boles
    • Gamaliel
      (29 miles [46.7 km] to the southwest)
  • Russell County
    • The following are listed by their distance from Breeding, with the one closest to Breeding listed first.
    • Long Bottom
      (17 miles [27.4 km] to the east)
    • Esto
      (18 miles [29 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Esto. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Esto
      • Esto is located in Russell County
      • Google driving directions:
      • From your current location to Esto
      • From Breeding to Esto
    • Freedom
      (18 miles [29 km] to the east)
    • Jamestown
      (20 miles [32.2 km] to the east)
    • Middletown
      (20 miles [32.2 km] to the east)
      • Note: The GPS coordinates that we are using for Middletown have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Middletown
      • Middletown is located in Russell County
    • Russell Springs
      (20 miles [32.2 km] to the east)
    • Lula ‑ Historic
      (21 miles [33.8 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Lula. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Lula
      • Lula is located in Russell County
      • Google driving directions:
      • From your current location to Lula
      • From Breeding to Lula
    • Stokes ‑ Historic
      (22 miles [35.4 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Stokes. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Stokes
      • Stokes is located in Russell County
      • Google driving directions:
      • From your current location to Stokes
      • From Breeding to Stokes
    • Salem
      (25 miles [40.2 km] to the east)
      • Note: The GPS coordinates that we are using for Salem have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Salem
      • Salem is located in Russell County
  • Taylor County
    • The following are listed by their distance from Breeding, with the one closest to Breeding listed first.
    • Wright's
      (24 miles [38.6 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Wright's. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Wright's
      • Wright's is located in Taylor County
      • Google driving directions:
      • From your current location to Wright's
      • From Breeding to Wright's
    • Elk Horn
      (25 miles [40.2 km] to the north)
    • Bengal
      (27 miles [43.5 km] to the north)
    • Campbellsville
      (27 miles [43.5 km] to the north)
      • Note: The GPS coordinates that we are using for Campbellsville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Campbellsville
      • Campbellsville is located in Taylor County
      • Population from the 2020 Census: 11,430 people
      • Jump to TripAdvisor's Tourism page for Campbellsville <3>
    • Acton
      (28 miles [45.1 km] to the north)
  • Wayne County
    • The following are listed by their distance from Breeding, with the one closest to Breeding listed first.
    • Parnell
      (27 miles [43.5 km] to the east)
    • Murl
      (28 miles [45.1 km] to the east)
  • Clay County (TN)
    • The following are listed by their distance from Breeding, with the one closest to Breeding listed first.
    • Thompsons Store
      (24 miles [38.6 km] to the south)
      • Note: The GPS coordinates that we are using for Thompsons Store have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Thompsons Store
      • Thompsons Store is located in Clay County (TN)
      • Estimated population in 2014: 3,180 people
    • Boles
      (26 miles [41.8 km] to the southwest)
    • Free Hill
      (27 miles [43.5 km] to the south)
    • Moss
      (27 miles [43.5 km] to the south)
    • Cave Springs
      (28 miles [45.1 km] to the south)
    • Celina
      (28 miles [45.1 km] to the south)
    • Clementsville
      (28 miles [45.1 km] to the southwest)
  • Pickett County (TN)
    • Static
      (30 miles [48.3 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Static. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Static
      • Static is located in Pickett County (TN)
      • Google driving directions:
      • From your current location to Static
      • From Breeding to Static

For an expanded list of the communities that are closest to Breeding, see our County-by-County Page for Breeding.

Cemeteries Near Breeding ...

Below are cemeteries that are in the vicinity of Breeding.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Breeding covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Breeding, with the one closest to Breeding listed first.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>

The Rand McNally Atlas shows that in 1895, Breeding had a post office and no railroad service.

These communities are listed based on their distance from Breeding, with the one closest to Breeding listed first.

  • Sparksville
    (3 miles [4.8 km] to the northeast)
  • Nell
    (4 miles [6.4 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Nell. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Nell
    • Nell is located in Adair County
    • Google driving directions:
    • From your current location to Nell
    • From Breeding to Nell
  • Gradyville
    (7 miles [11.3 km] to the north)
    • Note: The GPS coordinates that we are using for Gradyville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gradyville
    • Gradyville is located in Adair County
  • Amandaville
    (8 miles [12.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Amandaville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Amandaville
    • Amandaville is located in Cumberland County
  • Fairplay
    (8 miles [12.9 km] to the northeast)
  • Marrowbone
    (9 miles [14.5 km] to the southwest)
  • Waterview
    (9 miles [14.5 km] to the south)
  • Gadberry
    (9 miles [14.5 km] to the northeast)
  • Keltner
    (10 miles [16.1 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Keltner. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Keltner
    • Keltner is located in Adair County
    • Google driving directions:
    • From your current location to Keltner
    • From Breeding to Keltner
  • Glens Fork
    (10 miles [16.1 km] to the east)
  • Edmonton
    (10 miles [16.1 km] to the west)
    • Note: The GPS coordinates that we are using for Edmonton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Edmonton
    • Edmonton is located in Metcalfe County
    • Population from the 2020 Census: 1,597 people
    • Jump to TripAdvisor's Tourism page for Edmonton <3>
  • Milltown
    (11 miles [17.7 km] to the north)
    • Note: The GPS coordinates that we are using for Milltown have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Milltown
    • Milltown is located in Adair County
  • Continue List   (14 more) ...
    • Leslie
      (12 miles [19.3 km] to the south)
    • Burkesville
      (12 miles [19.3 km] to the south)
      • Note: The GPS coordinates that we are using for Burkesville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Burkesville
      • Burkesville is located in Cumberland County
      • Population from the 2020 Census: 1,437 people
      • Jump to TripAdvisor's Tourism page for Burkesville <3>
    • Crocus
      (12 miles [19.3 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Crocus. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Crocus
      • Crocus is located in Adair County
      • Google driving directions:
      • From your current location to Crocus
      • From Breeding to Crocus

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Breeding. See our List of 1890's Communities around Breeding.

Newspapers Published in Breeding ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 43 newspapers that have been published in the area around Breeding.

Although we're unaware of any newspapers that were published in the immediate area of Breeding, there are papers which were published within 22 miles [35.4 km]<4>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Breeding.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Breeding:

Unfortunately, we don't know of a website for Breeding. If you can help, please contact us through our Feedback Page.

The official website for State of Kentucky: https://kentucky.gov/

Footnotes ...

<1>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Breeding) to Point B.Our distance measurements begin at a specific point in Breeding. The point we use is located at these GPS coordinates - Latitude: 36.9586, Longitude: -85.4343       In this case, the coordinates for Breeding have been provided by the Geographic Names Information System (GNIS).
<5>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<6>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Breeding, please let us know so that we can improve our accuracy.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 28 Apr 2025