|
Nearest Communities to Allendale, Listed County-By-County
The purpose of this page is to identify those communities that are closest to Allendale, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Allendale:
We have great-grandparents who lived in a small community in the southwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.
When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.
Keep in mind that when we give a distance, it's a 'straight-line' distance starting from Allendale.<1>
If you're researching your genealogy, we hope that the following information helps.
Allendale is located in Green County.
The following 5 counties adjoin and form the boundaries of Green County: Adair, Hart, Larue, Metcalfe & Taylor.
Our Gazetteer shows that there are 287 communities within 40 miles [64.4 km]<1> of Allendale. Of these communities, 257 are located in counties other than Green County.
We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.
After starting with the home county for Allendale (which is Green County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Allendale
For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.
- Green County (where Allendale resides)
- County Seat for Green: Greensburg
- Genealogy Websites ...
- Nearest Communities to Allendale ...
- These communities are listed by their distance from Allendale.
- Bloyds Crossing
(Less than 2 miles to the southeast)
- Note: The GPS coordinates that we are using for Bloyds Crossing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bloyds Crossing
- Bloyds Crossing is located in Green County
- Coakley
(2 miles [3.2 km] to the east)
- Note: The GPS coordinates that we are using for Coakley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coakley
- Coakley is located in Green County
- Bloyd
(2 miles [3.2 km] to the north)
- Note: The GPS coordinates that we are using for Bloyd have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bloyd
- Bloyd is located in Green County
- Summersville
(3 miles [4.8 km] to the southeast)
- Lobb
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Lobb have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lobb
- Lobb is located in Green County
- Gabe
(4 miles [6.4 km] to the south)
- Hudgins
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Hudgins have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hudgins
- Hudgins is located in Green County
- Wards
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Wards have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wards
- Wards is located in Green County
- Eve
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Eve have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eve
- Eve is located in Green County
- Webbs
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Webbs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Webbs
- Webbs is located in Green County
- Donansburg
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Donansburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Donansburg
- Donansburg is located in Green County
- Black Gnat
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Black Gnat have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Black Gnat
- Black Gnat is located in Green County
- Continue List (18 more) ...
- Bluff Boom
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Bluff Boom have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bluff Boom
- Bluff Boom is located in Green County
- Greensburg
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Greensburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greensburg
- Greensburg is located in Green County
- Population from the 2020 Census: 2,057 people
- Jump to TripAdvisor's Tourism page for Greensburg <4>
- Grab
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Grab have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grab
- Grab is located in Green County
- Whitewood
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Whitewood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whitewood
- Whitewood is located in Green County
- Thurlow
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Thurlow have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Thurlow
- Thurlow is located in Green County
- Pierce
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Pierce have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pierce
- Pierce is located in Green County
- Roachville
(12 miles [19.3 km] to the southeast)
- Newt
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Newt have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newt
- Newt is located in Green County
- Exie
(14 miles [22.5 km] to the south)
- Gresham
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Gresham have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gresham
- Gresham is located in Green County
- Crailhope
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Crailhope have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crailhope
- Crailhope is located in Green County
- Liletown
(15 miles [24.1 km] to the south)
- Bramlett
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Bramlett have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bramlett
- Bramlett is located in Green County
- Fry
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Fry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fry
- Fry is located in Green County
- Little Barren
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Little Barren have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little Barren
- Little Barren is located in Green County
- Haskingsville
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Haskingsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Haskingsville
- Haskingsville is located in Green County
- Mount Gilead
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Mount Gilead have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Gilead
- Mount Gilead is located in Green County
- Mell
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Mell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mell
- Mell is located in Green County
- Adair County
- County Seat for Adair: Columbia
- Genealogy Websites ...
- Nearest Communities to Allendale ...
- These communities are listed by their distance from Allendale.
- Coburg
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Coburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coburg
- Coburg is located in Adair County
- Kemp
(17 miles [27.4 km] to the southeast)
- Pickett
(18 miles [29 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Pickett. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Pickett
- Pickett is located in Adair County
- Google driving directions:
- From your current location to Pickett
- From Allendale to Pickett
- Kellyville
(18 miles [29 km] to the southeast)
- Portland
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Portland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Portland
- Portland is located in Adair County
- Keltner
(19 miles [30.6 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Keltner. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Keltner
- Keltner is located in Adair County
- Google driving directions:
- From your current location to Keltner
- From Allendale to Keltner
- Cane Valley
(19 miles [30.6 km] to the southeast)
- Milltown
(19 miles [30.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Milltown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milltown
- Milltown is located in Adair County
- Holmes
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Holmes have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holmes
- Holmes is located in Adair County
- Speck
(22 miles [35.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Speck. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Speck
- Speck is located in Adair County
- Google driving directions:
- From your current location to Speck
- From Allendale to Speck
- Absher
(22 miles [35.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Absher. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Absher
- Absher is located in Adair County
- Google driving directions:
- From your current location to Absher
- From Allendale to Absher
- Gradyville
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Gradyville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gradyville
- Gradyville is located in Adair County
- Continue List (28 more) ...
- Feathersburg
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Feathersburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Feathersburg
- Feathersburg is located in Adair County
- Knifley
(23 miles [37 km] to the east)
- Weed
(23 miles [37 km] to the south)
- Bliss
(23 miles [37 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Bliss. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Bliss
- Bliss is located in Adair County
- Google driving directions:
- From your current location to Bliss
- From Allendale to Bliss
- Columbia
(23 miles [37 km] to the southeast)
- Casey Creek
(24 miles [38.6 km] to the east)
- Note: The GPS coordinates that we are using for Casey Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Casey Creek
- Casey Creek is located in Adair County
- Nell
(25 miles [40.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Nell. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Nell
- Nell is located in Adair County
- Google driving directions:
- From your current location to Nell
- From Allendale to Nell
- Dunbar Hill
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Dunbar Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunbar Hill
- Dunbar Hill is located in Adair County
- Flatwood
(25 miles [40.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Flatwood. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Flatwood
- Flatwood is located in Adair County
- Google driving directions:
- From your current location to Flatwood
- From Allendale to Flatwood
- Garlin
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Garlin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Garlin
- Garlin is located in Adair County
- Sparksville
(26 miles [41.8 km] to the south)
- Christine
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Christine have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Christine
- Christine is located in Adair County
- Purdy
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Purdy have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Purdy
- Purdy is located in Adair County
- Toria
(27 miles [43.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Toria. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Toria
- Toria is located in Adair County
- Google driving directions:
- From your current location to Toria
- From Allendale to Toria
- Gadberry
(27 miles [43.5 km] to the southeast)
- Neatsville
(27 miles [43.5 km] to the southeast)
- Ozark
(27 miles [43.5 km] to the southeast)
- Barnett Springs
(28 miles [45.1 km] to the east)
- Note: The GPS coordinates that we are using for Barnett Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barnett Springs
- Barnett Springs is located in Adair County
- Craycraft
(28 miles [45.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Craycraft. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Craycraft
- Craycraft is located in Adair County
- Google driving directions:
- From your current location to Craycraft
- From Allendale to Craycraft
- Ella
(28 miles [45.1 km] to the southeast)
- Eunice
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Eunice have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eunice
- Eunice is located in Adair County
- Joppa
(28 miles [45.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Joppa. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Joppa
- Joppa is located in Adair County
- Google driving directions:
- From your current location to Joppa
- From Allendale to Joppa
- Pellyton
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Pellyton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pellyton
- Pellyton is located in Adair County
- Breeding
(29 miles [46.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Breeding. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Breeding
- Breeding is located in Adair County
- Google driving directions:
- From your current location to Breeding
- From Allendale to Breeding
- Fairplay
(29 miles [46.7 km] to the southeast)
- Chance
(30 miles [48.3 km] to the southeast)
- Gentrys Mill
(30 miles [48.3 km] to the southeast)
- Glens Fork
(30 miles [48.3 km] to the southeast)
- Barren County
- County Seat for Barren: Glasgow
- Genealogy Websites ...
- Nearest Communities to Allendale ...
- These communities are listed by their distance from Allendale.
- Park
(19 miles [30.6 km] to the southwest)
- Halfway
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Halfway have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Halfway
- Halfway is located in Barren County
- Hiseville
(22 miles [35.4 km] to the southwest)
- Griderville
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Griderville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Griderville
- Griderville is located in Barren County
- Goodnight
(25 miles [40.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Goodnight have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Goodnight
- Goodnight is located in Barren County
- Cave City
(26 miles [41.8 km] to the southwest)
- Coral Hill
(26 miles [41.8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Coral Hill. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Coral Hill
- Coral Hill is located in Barren County
- Google driving directions:
- From your current location to Coral Hill
- From Allendale to Coral Hill
- Slick Rock
(27 miles [43.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Slick Rock. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Slick Rock
- Slick Rock is located in Barren County
- Google driving directions:
- From your current location to Slick Rock
- From Allendale to Slick Rock
- Highland Springs
(29 miles [46.7 km] to the southwest)
- Lecta
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Lecta have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lecta
- Lecta is located in Barren County
- Casey County
- County Seat for Casey: Liberty
- Genealogy Websites ...
- Nearest Communities to Allendale ...
- These communities are listed by their distance from Allendale.
- Bass
(24 miles [38.6 km] to the east)
- Note: The GPS coordinates that we are using for Bass have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bass
- Bass is located in Casey County
- Atterson
(27 miles [43.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Atterson. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Atterson
- Atterson is located in Casey County
- Google driving directions:
- From your current location to Atterson
- From Allendale to Atterson
- Clementsville
(27 miles [43.5 km] to the east)
- Note: The GPS coordinates that we are using for Clementsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clementsville
- Clementsville is located in Casey County
- Creston
(30 miles [48.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Creston. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Creston
- Creston is located in Casey County
- Google driving directions:
- From your current location to Creston
- From Allendale to Creston
- Grayson County
- County Seat for Grayson: Leitchfield
- Genealogy Websites ...
- Nearest Communities to Allendale ...
- These communities are listed by their distance from Allendale.
- Wheelers Mill
(24 miles [38.6 km] to the west)
- Millerstown
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Millerstown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millerstown
- Millerstown is located in Grayson County
- Broad Ford
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Broad Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Broad Ford
- Broad Ford is located in Grayson County
- Lone Oak
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Lone Oak have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lone Oak
- Lone Oak is located in Grayson County
- Spike
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Spike have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spike
- Spike is located in Grayson County
- Sportsmens Paradise
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Sportsmens Paradise have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sportsmens Paradise
- Sportsmens Paradise is located in Grayson County
- Hilltop
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Hilltop have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hilltop
- Hilltop is located in Grayson County
- Lacon
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Lacon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lacon
- Lacon is located in Grayson County
- Pearman
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Pearman have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pearman
- Pearman is located in Grayson County
- Pine Springs
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Pine Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pine Springs
- Pine Springs is located in Grayson County
- Royal
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Royal have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Royal
- Royal is located in Grayson County
- Wax
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Wax have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wax
- Wax is located in Grayson County
- Horntown
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Horntown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Horntown
- Horntown is located in Grayson County
- Linwood Park
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Linwood Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Linwood Park
- Linwood Park is located in Grayson County
- Hardin County
- County Website: www.hcky.org/
- County Seat for Hardin: Elizabethtown
- Genealogy Websites ...
- Nearest Communities to Allendale ...
- These communities are listed by their distance from Allendale.
- Upton
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Upton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Upton
- Upton is located in Hardin County
- Population from the 2020 Census: 691 people
- Jump to TripAdvisor's Tourism page for Upton <4>
- Sonora
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Sonora have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sonora
- Sonora is located in Hardin County
- Population from the 2020 Census: 523 people
- Jump to TripAdvisor's Tourism page for Sonora <4>
- Glendale Junction
(21 miles [33.8 km] to the northwest)
- Nolin
(21 miles [33.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Nolin. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Nolin
- Nolin is located in Hardin County
- Google driving directions:
- From your current location to Nolin
- From Allendale to Nolin
- Glendale
(23 miles [37 km] to the northwest)
- Melrose
(23 miles [37 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Melrose. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Melrose
- Melrose is located in Hardin County
- Google driving directions:
- From your current location to Melrose
- From Allendale to Melrose
- Flint Hill
(24 miles [38.6 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Flint Hill. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Flint Hill
- Flint Hill is located in Hardin County
- Google driving directions:
- From your current location to Flint Hill
- From Allendale to Flint Hill
- Seven Corners
(24 miles [38.6 km] to the west)
- Gaithers
(26 miles [41.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Gaithers. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Gaithers
- Gaithers is located in Hardin County
- Google driving directions:
- From your current location to Gaithers
- From Allendale to Gaithers
- Harcourt
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Harcourt have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harcourt
- Harcourt is located in Hardin County
- Star Mills
(26 miles [41.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Star Mills. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Star Mills
- Star Mills is located in Hardin County
- Google driving directions:
- From your current location to Star Mills
- From Allendale to Star Mills
- Spurrier
(26 miles [41.8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Spurrier. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Spurrier
- Spurrier is located in Hardin County
- Google driving directions:
- From your current location to Spurrier
- From Allendale to Spurrier
- Continue List (15 more) ...
- Younger Creek
(27 miles [43.5 km] to the north)
- Elizabethtown
(27 miles [43.5 km] to the northwest)
- Indian Hills
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Indian Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Indian Hills
- Indian Hills is located in Hardin County
- White Mills
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for White Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Mills
- White Mills is located in Hardin County
- Cecilia
(28 miles [45.1 km] to the northwest)
- Tunnel Hills
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Tunnel Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tunnel Hills
- Tunnel Hills is located in Hardin County
- White Mills Junction
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for White Mills Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Mills Junction
- White Mills Junction is located in Hardin County
- Crest
(29 miles [46.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Crest. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Crest
- Crest is located in Hardin County
- Google driving directions:
- From your current location to Crest
- From Allendale to Crest
- Eastview
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Eastview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eastview
- Eastview is located in Hardin County
- Hansbrough
(29 miles [46.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Hansbrough. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Hansbrough
- Hansbrough is located in Hardin County
- Google driving directions:
- From your current location to Hansbrough
- From Allendale to Hansbrough
- Old Stephensburg
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Old Stephensburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Old Stephensburg
- Old Stephensburg is located in Hardin County
- Stephensburg
(29 miles [46.7 km] to the northwest)
- Colesburg
(30 miles [48.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Colesburg. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Colesburg
- Colesburg is located in Hardin County
- Google driving directions:
- From your current location to Colesburg
- From Allendale to Colesburg
- Saint John
(30 miles [48.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Saint John. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Saint John
- Saint John is located in Hardin County
- Google driving directions:
- From your current location to Saint John
- From Allendale to Saint John
- Summit
(30 miles [48.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Summit. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Summit
- Summit is located in Hardin County
- Google driving directions:
- From your current location to Summit
- From Allendale to Summit
- Hart County
- County Seat for Hart: Munfordville
- Genealogy Websites ...
- Nearest Communities to Allendale ...
- These communities are listed by their distance from Allendale.
- Powder Mill
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Powder Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Powder Mill
- Powder Mill is located in Hart County
- Defries
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Defries have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Defries
- Defries is located in Hart County
- Linwood
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Linwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Linwood
- Linwood is located in Hart County
- Pike View
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Pike View have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pike View
- Pike View is located in Hart County
- Jonesville
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Jonesville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jonesville
- Jonesville is located in Hart County
- Rio
(10 miles [16.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Rio. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Rio
- Rio is located in Hart County
- Google driving directions:
- From your current location to Rio
- From Allendale to Rio
- Canmer
(11 miles [17.7 km] to the southwest)
- Monroe
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Monroe have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monroe
- Monroe is located in Hart County
- Glen Lily
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Glen Lily have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glen Lily
- Glen Lily is located in Hart County
- Hammonville
(12 miles [19.3 km] to the west)
- Hardyville
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Hardyville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hardyville
- Hardyville is located in Hart County
- Pascal
(13 miles [20.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Pascal. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Pascal
- Pascal is located in Hart County
- Google driving directions:
- From your current location to Pascal
- From Allendale to Pascal
- Continue List (35 more) ...
- Whickerville
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Whickerville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whickerville
- Whickerville is located in Hart County
- Hinesdale
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Hinesdale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hinesdale
- Hinesdale is located in Hart County
- High Hickory
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for High Hickory have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for High Hickory
- High Hickory is located in Hart County
- Wabash
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Wabash have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wabash
- Wabash is located in Hart County
- Bunnell Crossing
(15 miles [24.1 km] to the southwest)
- Rex
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Rex have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rex
- Rex is located in Hart County
- Three Springs
(16 miles [25.7 km] to the southwest)
- LeGrande
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for LeGrande have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for LeGrande
- LeGrande is located in Hart County
- Bonnieville
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Bonnieville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bonnieville
- Bonnieville is located in Hart County
- Population from the 2020 Census: 260 people
- Jump to TripAdvisor's Tourism page for Bonnieville <4>
- Vento
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Vento have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vento
- Vento is located in Hart County
- Seymour
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Seymour have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Seymour
- Seymour is located in Hart County
- Uno
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Uno have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Uno
- Uno is located in Hart County
- Woodsonville
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Woodsonville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodsonville
- Woodsonville is located in Hart County
- Leitchfield Crossing
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Leitchfield Crossing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leitchfield Crossing
- Leitchfield Crossing is located in Hart County
- Munfordville
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Munfordville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Munfordville
- Munfordville is located in Hart County
- Population from the 2020 Census: 1,660 people
- Jump to TripAdvisor's Tourism page for Munfordville <4>
- Perryville
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Perryville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Perryville
- Perryville is located in Hart County
- Rowletts
(19 miles [30.6 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Rowletts. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Rowletts
- Rowletts is located in Hart County
- Google driving directions:
- From your current location to Rowletts
- From Allendale to Rowletts
- Lone Star
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Lone Star have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lone Star
- Lone Star is located in Hart County
- Mount Beulah
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Mount Beulah have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Beulah
- Mount Beulah is located in Hart County
- Kessinger
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Kessinger have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kessinger
- Kessinger is located in Hart County
- Horse Cave
(22 miles [35.4 km] to the southwest)
- Logsdon Valley
(22 miles [35.4 km] to the west)
- Priceville
(22 miles [35.4 km] to the west)
- Riders Mill
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Riders Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riders Mill
- Riders Mill is located in Hart County
- Forestville
(23 miles [37 km] to the west)
- Note: The GPS coordinates that we are using for Forestville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forestville
- Forestville is located in Hart County
- Macon
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for Macon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Macon
- Macon is located in Hart County
- Winesap
(24 miles [38.6 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Winesap. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Winesap
- Winesap is located in Hart County
- Google driving directions:
- From your current location to Winesap
- From Allendale to Winesap
- Northtown
(25 miles [40.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Northtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Northtown
- Northtown is located in Hart County
- Lines Mill
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Lines Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lines Mill
- Lines Mill is located in Hart County
- Tom Johns Crossing
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Tom Johns Crossing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tom Johns Crossing
- Tom Johns Crossing is located in Hart County
- Cub Run
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Cub Run have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cub Run
- Cub Run is located in Hart County
- Jump to TripAdvisor's Tourism page for Cub Run <4>
- Roseburg
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Roseburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roseburg
- Roseburg is located in Hart County
- Bee
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Bee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bee
- Bee is located in Hart County
- Big Windy
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Big Windy have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Big Windy
- Big Windy is located in Hart County
- Dogcreek
(29 miles [46.7 km] to the west)
- Larue County
- County Website: www.laruecounty.net
- County Seat for Larue: Hodgenville
- Genealogy Websites ...
- Nearest Communities to Allendale ...
- These communities are listed by their distance from Allendale.
- Mount Sherman
(7 miles [11.3 km] to the northwest)
- Ginseng
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Ginseng have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ginseng
- Ginseng is located in Larue County
- Jericho
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Jericho have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jericho
- Jericho is located in Larue County
- Attilla
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Attilla have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Attilla
- Attilla is located in Larue County
- Magnolia
(10 miles [16.1 km] to the northwest)
- Buffalo
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Buffalo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buffalo
- Buffalo is located in Larue County
- South Buffalo
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for South Buffalo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Buffalo
- South Buffalo is located in Larue County
- Gleanings
(13 miles [20.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Gleanings. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Gleanings
- Gleanings is located in Larue County
- Google driving directions:
- From your current location to Gleanings
- From Allendale to Gleanings
- Boundary Oak
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Boundary Oak have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boundary Oak
- Boundary Oak is located in Larue County
- Maxine
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Maxine have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maxine
- Maxine is located in Larue County
- Leafdale
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Leafdale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leafdale
- Leafdale is located in Larue County
- Tanner
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Tanner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tanner
- Tanner is located in Larue County
- Continue List (8 more) ...
- White City ‑ Historic
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for White City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White City
- White City is located in Larue County
- Mathers Mill
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Mathers Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mathers Mill
- Mathers Mill is located in Larue County
- Talley
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Talley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Talley
- Talley is located in Larue County
- Hodgenville
(16 miles [25.7 km] to the northwest)
- Athertonville
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for Athertonville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Athertonville
- Athertonville is located in Larue County
- Tonieville
(20 miles [32.2 km] to the northwest)
- Lyons
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Lyons have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lyons
- Lyons is located in Larue County
- Roanoke
(22 miles [35.4 km] to the north)
- Marion County
- County Seat for Marion: Lebanon
- Genealogy Websites ...
- Nearest Communities to Allendale ...
- These communities are listed by their distance from Allendale.
- Saint Joseph
(14 miles [22.5 km] to the northeast)
- Raywick
(15 miles [24.1 km] to the northeast)
- Jessietown
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Jessietown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jessietown
- Jessietown is located in Marion County
- New Market
(17 miles [27.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for New Market. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for New Market
- New Market is located in Marion County
- Google driving directions:
- From your current location to New Market
- From Allendale to New Market
- Phillipsburg
(18 miles [29 km] to the east)
- Dant
(19 miles [30.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Dant. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Dant
- Dant is located in Marion County
- Google driving directions:
- From your current location to Dant
- From Allendale to Dant
- Belltown
(19 miles [30.6 km] to the northeast)
- Frogtown
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Frogtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Frogtown
- Frogtown is located in Marion County
- Saint Francis
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Saint Francis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Francis
- Saint Francis is located in Marion County
- Saint Mary
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Saint Mary have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Mary
- Saint Mary is located in Marion County
- Jump to TripAdvisor's Tourism page for Saint Mary <4>
- Calvary
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Calvary have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calvary
- Calvary is located in Marion County
- Loretto
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Loretto have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loretto
- Loretto is located in Marion County
- Population from the 2020 Census: 692 people
- Jump to TripAdvisor's Tourism page for Loretto <4>
- Continue List (13 more) ...
- Salleetown
(21 miles [33.8 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Salleetown. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Salleetown
- Salleetown is located in Marion County
- Google driving directions:
- From your current location to Salleetown
- From Allendale to Salleetown
- Greenbriar
(21 miles [33.8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Greenbriar. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Greenbriar
- Greenbriar is located in Marion County
- Google driving directions:
- From your current location to Greenbriar
- From Allendale to Greenbriar
- Peck Ford
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Peck Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peck Ford
- Peck Ford is located in Marion County
- Holy Cross
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Holy Cross have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holy Cross
- Holy Cross is located in Marion County
- Lebanon
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Lebanon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lebanon
- Lebanon is located in Marion County
- Population from the 2020 Census: 5,733 people
- Jump to TripAdvisor's Tourism page for Lebanon <4>
- Nerinx
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Nerinx have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nerinx
- Nerinx is located in Marion County
- Burkes Spring
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Burkes Spring have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burkes Spring
- Burkes Spring is located in Marion County
- Gandertown
(24 miles [38.6 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Gandertown. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Gandertown
- Gandertown is located in Marion County
- Google driving directions:
- From your current location to Gandertown
- From Allendale to Gandertown
- Bradfordsville
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Bradfordsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bradfordsville
- Bradfordsville is located in Marion County
- Population from the 2020 Census: 299 people
- Jump to TripAdvisor's Tourism page for Bradfordsville <4>
- Penick
(27 miles [43.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Penick. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Penick
- Penick is located in Marion County
- Google driving directions:
- From your current location to Penick
- From Allendale to Penick
- Poplar Corner
(28 miles [45.1 km] to the northeast)
- Simstown
(28 miles [45.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Simstown. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Simstown
- Simstown is located in Marion County
- Google driving directions:
- From your current location to Simstown
- From Allendale to Simstown
- Riley
(29 miles [46.7 km] to the northeast)
- Metcalfe County
- County Seat for Metcalfe: Edmonton
- Genealogy Websites ...
- Nearest Communities to Allendale ...
- These communities are listed by their distance from Allendale.
- Shady Grove
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Shady Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shady Grove
- Shady Grove is located in Metcalfe County
- Center
(16 miles [25.7 km] to the south)
- Node
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Node have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Node
- Node is located in Metcalfe County
- Savoyard
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Savoyard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Savoyard
- Savoyard is located in Metcalfe County
- Beechville
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Beechville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beechville
- Beechville is located in Metcalfe County
- Knob Lick
(21 miles [33.8 km] to the south)
- Cork
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Cork have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cork
- Cork is located in Metcalfe County
- Clarks Corner
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Clarks Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarks Corner
- Clarks Corner is located in Metcalfe County
- Echo
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Echo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Echo
- Echo is located in Metcalfe County
- Gascon
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Gascon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gascon
- Gascon is located in Metcalfe County
- New Liberty
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for New Liberty have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Liberty
- New Liberty is located in Metcalfe County
- Edmonton
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Edmonton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edmonton
- Edmonton is located in Metcalfe County
- Population from the 2020 Census: 1,597 people
- Jump to TripAdvisor's Tourism page for Edmonton <4>
- Continue List (6 more) ...
- Wisdom
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Wisdom have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wisdom
- Wisdom is located in Metcalfe County
- Cofer
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Cofer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cofer
- Cofer is located in Metcalfe County
- Randolph
(28 miles [45.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Randolph. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Randolph
- Randolph is located in Metcalfe County
- Google driving directions:
- From your current location to Randolph
- From Allendale to Randolph
- Cedar Flat
(29 miles [46.7 km] to the south)
- Curtis
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Curtis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Curtis
- Curtis is located in Metcalfe County
- Goodluck
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Goodluck have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Goodluck
- Goodluck is located in Metcalfe County
- Nelson County
- County Website: www.nelsoncountyky.com
- County Seat for Nelson: Bardstown
- Genealogy Websites ...
- Nearest Communities to Allendale ...
- These communities are listed by their distance from Allendale.
- Stiles
(11 miles [17.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Stiles. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Stiles
- Stiles is located in Nelson County
- Google driving directions:
- From your current location to Stiles
- From Allendale to Stiles
- Howardstown
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Howardstown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howardstown
- Howardstown is located in Nelson County
- New Hope
(18 miles [29 km] to the north)
- Gethsemane
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Gethsemane have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gethsemane
- Gethsemane is located in Nelson County
- New Haven
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for New Haven have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Haven
- New Haven is located in Nelson County
- Population from the 2020 Census: 900 people
- Jump to TripAdvisor's Tourism page for New Haven <4>
- Blue Gap
(22 miles [35.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Blue Gap. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Blue Gap
- Blue Gap is located in Nelson County
- Google driving directions:
- From your current location to Blue Gap
- From Allendale to Blue Gap
- Culvertown
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Culvertown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Culvertown
- Culvertown is located in Nelson County
- Balltown
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Balltown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Balltown
- Balltown is located in Nelson County
- Greenbrier
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Greenbrier have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenbrier
- Greenbrier is located in Nelson County
- Continue List (6 more) ...
- Nelsonville
(25 miles [40.2 km] to the north)
- Bellwood
(29 miles [46.7 km] to the north)
- Boston
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Boston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boston
- Boston is located in Nelson County
- Jump to TripAdvisor's Tourism page for Boston <4>
- Botland
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Botland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Botland
- Botland is located in Nelson County
- Bardstown
(30 miles [48.3 km] to the north)
- Cravens
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Cravens have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cravens
- Cravens is located in Nelson County
- Taylor County
- County Seat for Taylor: Campbellsville
- Genealogy Websites ...
- Nearest Communities to Allendale ...
- These communities are listed by their distance from Allendale.
- Mac
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Mac have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mac
- Mac is located in Taylor County
- Pitman
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Pitman have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pitman
- Pitman is located in Taylor County
- Bengal
(6 miles [9.7 km] to the east)
- Hibernia
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Hibernia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hibernia
- Hibernia is located in Taylor County
- Badger
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Badger have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Badger
- Badger is located in Taylor County
- Maple
(7 miles [11.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Maple. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Maple
- Maple is located in Taylor County
- Google driving directions:
- From your current location to Maple
- From Allendale to Maple
- White Rose
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for White Rose have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Rose
- White Rose is located in Taylor County
- Durhamtown
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Durhamtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Durhamtown
- Durhamtown is located in Taylor County
- Saloma
(10 miles [16.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Saloma. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Saloma
- Saloma is located in Taylor County
- Google driving directions:
- From your current location to Saloma
- From Allendale to Saloma
- Sweeneyville
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Sweeneyville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sweeneyville
- Sweeneyville is located in Taylor County
- Wright's
(10 miles [16.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Wright's. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Wright's
- Wright's is located in Taylor County
- Google driving directions:
- From your current location to Wright's
- From Allendale to Wright's
- Willowtown
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Willowtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willowtown
- Willowtown is located in Taylor County
- Continue List (16 more) ...
- Campbellsville
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Campbellsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Campbellsville
- Campbellsville is located in Taylor County
- Population from the 2020 Census: 11,430 people
- Jump to TripAdvisor's Tourism page for Campbellsville <4>
- Hobson
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Hobson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hobson
- Hobson is located in Taylor County
- Burdick
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Burdick have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burdick
- Burdick is located in Taylor County
- Hatcher
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Hatcher have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hatcher
- Hatcher is located in Taylor County
- South Campbellsville
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for South Campbellsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Campbellsville
- South Campbellsville is located in Taylor County
- Finley
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Finley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Finley
- Finley is located in Taylor County
- Arista
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Arista have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arista
- Arista is located in Taylor County
- Romine
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Romine have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Romine
- Romine is located in Taylor County
- Atchison
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Atchison have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Atchison
- Atchison is located in Taylor County
- Elk Horn
(16 miles [25.7 km] to the east)
- Spurlington
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Spurlington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spurlington
- Spurlington is located in Taylor County
- Acton
(18 miles [29 km] to the east)
- Wooleyville
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Wooleyville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wooleyville
- Wooleyville is located in Taylor County
- Yuma
(19 miles [30.6 km] to the east)
- Note: The GPS coordinates that we are using for Yuma have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Yuma
- Yuma is located in Taylor County
- Mannsville
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Mannsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mannsville
- Mannsville is located in Taylor County
- Merrimac
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Merrimac have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Merrimac
- Merrimac is located in Taylor County
- Washington County
- County Seat for Washington: Springfield
- Genealogy Websites ...
- Nearest Communities to Allendale ...
- These communities are listed by their distance from Allendale.
- Manton
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Manton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manton
- Manton is located in Washington County
- Bearwallow
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Bearwallow have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bearwallow
- Bearwallow is located in Washington County
- Cisselville
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Cisselville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cisselville
- Cisselville is located in Washington County
- Briartown
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Briartown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Briartown
- Briartown is located in Washington County
- Fredericktown
(29 miles [46.7 km] to the northeast)
- Jimtown
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Jimtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jimtown
- Jimtown is located in Washington County
- Saint Catharine
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Saint Catharine have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Catharine
- Saint Catharine is located in Washington County
- Springfield
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Springfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springfield
- Springfield is located in Washington County
- Population from the 2020 Census: 2,987 people
- Jump to TripAdvisor's Tourism page for Springfield <4>
- Rineltown
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Rineltown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rineltown
- Rineltown is located in Washington County
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Allendale) to Point B.Our distance measurements begin at a specific point in Allendale. The point we use is located at these GPS coordinates - Latitude: 37.3706, Longitude: -85.5832 |
<2> | Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.
We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.
Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<5> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|