|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Wego-Waco in the Atlas, the following communities of the 1890's would have been found near the current location of Wego-Waco. The following communities are listed based on their distance, with the one closest to Wego-Waco listed first.
- Waco
(Less than 2 miles to the east)
- Note: The GPS coordinates that we are using for Waco have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waco
- Waco is located in Sedgwick County
- Peck
(3 miles [4.8 km] to the southwest)
- Haysville
(3 miles [4.8 km] to the north)
- Note: The GPS coordinates that we are using for Haysville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Haysville
- Haysville is located in Sedgwick County
- Population from the 2020 Census: 11,389 people
- Jump to TripAdvisor's Tourism page for Haysville <3>
- Derby
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Derby have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Derby
- Derby is located in Sedgwick County
- Population from the 2020 Census: 25,145 people
- Jump to TripAdvisor's Tourism page for Derby <3>
- Mulvane
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Mulvane have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mulvane
- Mulvane is located in Sedgwick County
- Population from the 2020 Census: 6,566 people
- Jump to TripAdvisor's Tourism page for Mulvane <3>
- Zyba
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Zyba have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Zyba
- Zyba is located in Sumner County
- Zyba has also been known as:
- Zuba
- Zyber
- Bayneville
(6 miles [9.7 km] to the west)
- Oatville
(7 miles [11.3 km] to the northwest)
- Riverdale
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Riverdale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riverdale
- Riverdale is located in Sumner County
- Belle Plaine
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Belle Plaine have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belle Plaine
- Belle Plaine is located in Sumner County
- Population from the 2020 Census: 1,535 people
- Jump to TripAdvisor's Tourism page for Belle Plaine <3>
- Clearwater
(9 miles [14.5 km] to the west)
- Rose Hill
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Rose Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rose Hill
- Rose Hill is located in Butler County
- Population from the 2020 Census: 3,979 people
- Jump to TripAdvisor's Tourism page for Rose Hill <3>
- Wichita
(11 miles [17.7 km] to the north)
- Cicero
(12 miles [19.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Cicero. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Cicero
- Cicero is located in Sumner County
- Google driving directions:
- From your current location to Cicero
- From Wego-Waco to Cicero
- Millerton
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Millerton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millerton
- Millerton is located in Sumner County
- Udall
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Udall have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Udall
- Udall is located in Cowley County
- Population from the 2020 Census: 701 people
- Jump to TripAdvisor's Tourism page for Udall <3>
- Minneha
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Minneha have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Minneha
- Minneha is located in Sedgwick County
- Anson
(15 miles [24.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Anson. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Anson
- Anson is located in Sumner County
- Google driving directions:
- From your current location to Anson
- From Wego-Waco to Anson
- Whitman
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Whitman have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whitman
- Whitman is located in Sumner County
- Andover
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Andover have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Andover
- Andover is located in Butler County
- Population from the 2020 Census: 13,672 people
- Andover has also been known as:
- Cloud City
- Jump to TripAdvisor's Tourism page for Andover <3>
- Tolerville
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Tolerville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tolerville
- Tolerville is located in Sedgwick County
- Goddard
(16 miles [25.7 km] to the northwest)
- Wellington
(17 miles [27.4 km] to the south)
- Dalton
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Dalton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dalton
- Dalton is located in Sumner County
- Douglass
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Douglass have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Douglass
- Douglass is located in Butler County
- Population from the 2020 Census: 1,646 people
- Jump to TripAdvisor's Tourism page for Douglass <3>
- Viola
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Viola have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Viola
- Viola is located in Sedgwick County
- Population from the 2020 Census: 126 people
- Jump to TripAdvisor's Tourism page for Viola <3>
Off-the-Road Links ...
The official website for Sedgwick County: www.sedgwickcounty.org/ The official website for State of Kansas: https://portal.kansas.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Wego-Waco, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|