Outdoor Activities ...
As we travel, we like to pursue some of our interests (such as astronomy and bird watching).
When in Industry, we use the following websites to find information relevant to Industry and the surrounding area.
- Weather ...
- Before heading outdoors, you should check the weather:
- The National Weather Service forecast for Industry
- Astronomy & Satellites ...
- Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
- To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Industry:
- 39.134418, -97.172148
- Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
- The Heavens-Above Website, centered on Industry
- Bird Watching ...
- We enjoy finding new spots for bird watching and we use the eBird website for local sighting reports and to help identify hotspots.
- The eBird website is organized on a county-by-county basis. We have selected Clay County as the starting point when you click on the link below:
- eBird sighting report for Clay County
- Since Industry is near Dickinson County and also Geary County, we have provided a link to their eBird sighting reports:
- eBird sighting report for Dickinson County
- eBird sighting report for Geary County
- Waymarking ...
- Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
- Waymark.com
Communities Also Named Industry ...
We found eleven communities that share the name Industry.
Within Kansas, the name Industry is unique.
Beyond Kansas, we know of another eleven communities that are located throughout in the United States.
- Communities Elsewhere In North America ...
- Alabama
- Illinois
- Indiana
- Iowa
- Maine
- Ohio
- Montgomery County
- This community is historic<3> and although located in Montgomery County, we don't know where within the county.
- For more information, please visit our profile page for the Montgomery County community of Industry.
- Portage County
- This Industry is located in Portage County and lies 853 miles [1,372.8 km]<1> to the east northeast of the Industry that is located in Clay County.
- For more information, please visit our profile page for the Portage County community of Industry.
- Pennsylvania
- Allegheny County
- This Industry is located in Allegheny County and lies 925 miles [1,488.6 km]<1> to the east of the Industry that is located in Clay County.
- For more information, please visit our profile page for the Allegheny County community of Industry.
- Beaver County
- This Industry is located in Beaver County and lies 892 miles [1,435.5 km] to the east northeast of the Industry that is located in Clay County.
- For more information, please visit our profile page for the Beaver County community of Industry.
- Texas
- West Virginia
Curious and Interesting Names Near Industry ...
As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.
- Acme
(20 miles [32.2 km] to the south) - Buckeye
(6 miles [9.7 km] to the south)- Jump to our Gazetteer entry for Buckeye
- Buckeye is located in Dickinson County
- Enterprise
(16 miles [25.7 km] to the south)- Jump to our Gazetteer entry for Enterprise
- Enterprise is located in Dickinson County
- Population from the 2020 Census: 773 people
- Jump to TripAdvisor's Tourism page for Enterprise <5>
- Junction City
(19 miles [30.6 km] to the east)- Jump to our Gazetteer entry for Junction City
- Junction City is located in Geary County
- Population from the 2020 Census: 21,862 people
- Jump to TripAdvisor's Tourism page for Junction City <5>
- Kansas Falls
(17 miles [27.4 km] to the southeast)- Note: The GPS coordinates that we are using for Kansas Falls have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kansas Falls
- Kansas Falls is located in Geary County
- Ladysmith
(9 miles [14.5 km] to the north) - Moonlight
(9 miles [14.5 km] to the southeast) - Pearl
(20 miles [32.2 km] to the south) - Sand Spring
(16 miles [25.7 km] to the south)- Note: The GPS coordinates that we are using for Sand Spring have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sand Spring
- Sand Spring is located in Dickinson County
- Vine Creek
(13 miles [20.9 km] to the west)- Note: The GPS coordinates that we are using for Vine Creek have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vine Creek
- Vine Creek is located in Ottawa County
- Former name for Vine Creek:
- Vine
How Far From Industry to ...
We spend a lot of time looking through Gazetteers & Almanacs that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Industry to various places of note, such as the White House.
With a nod to our favorite Gazetteers, the straight-line distance beginning in Industry and extending to:
- Clay Center, which is the Seat of Clay County, lies 17 miles [27.4 km]<1> to the north. If you could walk a straight line from Industry to Clay Center, with an average speed<6> of 2.2 miles [3.5 km] per hour, it would take most of a day to make the trip. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take five to six hours.
- Topeka, which is the State Capital of Kansas, lies 80 miles [128.7 km] to the east (E). Driving, with an average speed of 63 miles [101.4 km] per hour, would take less than two hours, a buggy would take most of three days and walking would take 5 days.
- The White House (Washington, DC) is 1,078 miles [1,734.9 km] to the east (E). Driving would take over two days, a buggy would take 43 days and walking would take 62 days.
- The shortest distance<7> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 6,659 miles [10,716.6 km] and it lies to the northeast (NE).<8>
- The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 7,409 miles [11,923.6 km] and it lies to the northeast (NE).<9>
- The distance to Saint Peter's Basilica (The Vatican) is 5,306 miles [8,539.2 km] and it lies to the northeast (NE).<10>
Off-the-Road Links ...
Unfortunately, we don't know of a website for Industry. If you can help, please contact us through our Feedback Page.
The official website for Clay County: www.claycountyks.org/
The official website for State of Kansas: https://portal.kansas.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Industry) to Point B.Our distance measurements begin at a specific point in Industry. The point we use is located at these GPS coordinates - Latitude: 39.1344, Longitude: -97.1721 |
| <2> | If we encounter the name of what might be a community, our methodology is to add that name to our Gazetteer as a placeholder. As we find more information about that community, it will be added to our Gazetteer. Just as a reminder: Our definition of a community is rather broad and includes those places (or areas) where several families lived and had a name which identified that place. For example, you might hear somebody say that they are going over to Bird Creek to see Pete ... Bird Creek is just a gas station and a couple of homes at the crossroads. While it might not be on the map, everybody in the area knows it by that name. Places of interest include buildings at a crossroad, several families clustered in a hollow or maybe the location of a way station. It also includes places like mines, lumber camps, ferry crossings, etc. The community might still exist, is now gone or only existed for just a short period of time. Also keep in mind that Industry could have been on the original document by mistake, misspelled, the original/alternate name of a community that we've listed elsewhere or was placed in the wrong county. Sometimes a post office or train station would have a different name than the community where it's located, so two names might be referring to the same community - we're working to straighten it all out. |
| <3> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Industry, please let us know so that we can improve our accuracy. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <5> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <6> | While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day. |
| <7> | The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Industry to the Middle East to be East and South, the Great Circle Route actually lies to the North and East. |
| <8> | The calculated bearing (or angle) to Jerusalem is 320.826 degrees. |
| <9> | The calculated bearing (or angle) to Mecca is 318.316 degrees. |
| <10> | The calculated bearing (or angle) to the Vatican is 313.95 degrees. |