Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Haviland had a population of 126 people in 1895 with a post office and railroad service. In 2020, Haviland had a population of 664 people.
The following communities are listed based on their distance from Haviland, with the one closest to Haviland listed first.
- Wellsford
(4 miles [6.4 km] to the east)
- Jump to our Gazetteer entry for Wellsford
- Wellsford is located in Kiowa County
- Brenham ‑ Historic
(5 miles [8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Brenham. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Brenham
- Brenham is located in Kiowa County
- Cullison
(10 miles [16.1 km] to the east)
- Jump to our Gazetteer entry for Cullison
- Cullison is located in Pratt County
- Population from the 2020 Census: 100 people
- Greensburg
(10 miles [16.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Greensburg. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Greensburg
- Greensburg is located in Kiowa County
- Population from the 2020 Census: 779 people
- Jump to TripAdvisor's Tourism page for Greensburg <3>
- Belvidere
(11 miles [17.7 km] to the south)
- Jump to our Gazetteer entry for Belvidere
- Belvidere is located in Kiowa County
- Springvale
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Springvale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springvale
- Springvale is located in Pratt County
- Springvale has also been known as:
- Springdale
- Fellsburg
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Fellsburg have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fellsburg
- Fellsburg is located in Edwards County
- Coats
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Coats have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coats
- Coats is located in Pratt County
- Population from the 2020 Census: 75 people
- Sun City
(19 miles [30.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Sun City have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sun City
- Sun City is located in Barber County
- Population from the 2020 Census: 47 people
- Jump to TripAdvisor's Tourism page for Sun City <3>
- Wilmore
(20 miles [32.2 km] to the south)
- Jump to our Gazetteer entry for Wilmore
- Wilmore is located in Comanche County
- Population from the 2020 Census: 47 people
- Pratt
(20 miles [32.2 km] to the east)
- Mullinville
(20 miles [32.2 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Mullinville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Mullinville
- Mullinville is located in Kiowa County
- Population from the 2020 Census: 237 people
- Jump to TripAdvisor's Tourism page for Mullinville <3>
- Iuka
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Iuka have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Iuka
- Iuka is located in Pratt County
- Population from the 2020 Census: 156 people
- Belpre
(22 miles [35.4 km] to the north)
- Jump to our Gazetteer entry for Belpre
- Belpre is located in Edwards County
- Population from the 2020 Census: 81 people
- Lewis
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Lewis have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lewis
- Lewis is located in Edwards County
- Population from the 2020 Census: 407 people
- Jump to TripAdvisor's Tourism page for Lewis <3>
- Lake City
(23 miles [37 km] to the southeast)
- Jump to our Gazetteer entry for Lake City
- Lake City is located in Barber County
- Sawyer
(24 miles [38.6 km] to the east)
- Jump to our Gazetteer entry for Sawyer
- Sawyer is located in Pratt County
- Population from the 2020 Census: 129 people
- Natrona
(24 miles [38.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Natrona. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Natrona
- Natrona is located in Pratt County
- Macksville
(24 miles [38.6 km] to the north)
- Coldwater
(26 miles [41.8 km] to the southwest)
- Elm Mills
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Elm Mills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elm Mills
- Elm Mills is located in Barber County
- Kinsley
(26 miles [41.8 km] to the northwest)
- Dillwyn
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Dillwyn have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dillwyn
- Dillwyn is located in Stafford County
- Deerhead
(28 miles [45.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Deerhead. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Deerhead
- Deerhead is located in Barber County
- Nettleton
(29 miles [46.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Nettleton. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Nettleton
- Nettleton is located in Edwards County
- Bucklin
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Bucklin have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bucklin
- Bucklin is located in Ford County
- Population from the 2020 Census: 754 people
- Jump to TripAdvisor's Tourism page for Bucklin <3>
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Haviland. If you can help, please contact us through our Feedback Page.
The official website for State of Kansas: https://portal.kansas.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Haviland, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |