Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Winterset Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Winterset Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Winterset Cemetery. We've listed the following communities based on their distance, with the closest first.

Pfeifer
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Pfeifer have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pfeifer
- Pfeifer is located in Ellis County
Milberger
(7 miles [11.3 km] to the southeast)
- Jump to our Gazetteer entry for Milberger
- Milberger is located in Russell County
Walker
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Walker have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walker
- Walker is located in Ellis County
Galatia
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Galatia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Galatia
- Galatia is located in Barton County
- Population from the 2020 Census: 36 people
Gorham
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Gorham have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gorham
- Gorham is located in Russell County
- Population from the 2020 Census: 336 people
- Jump to TripAdvisor's Tourism page for Gorham <3>
Victoria
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Victoria have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Victoria
- Victoria is located in Ellis County
- Population from the 2020 Census: 1,215 people
Loretta
(10 miles [16.1 km] to the southwest)
- Jump to our Gazetteer entry for Loretta
- Loretta is located in Rush County
- Former names for Loretta:
- Illinois
- Marienfeld
Millard
(11 miles [17.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Millard. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Millard
- Millard is located in Barton County
Balta ‑ Historic
(11 miles [17.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Balta. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Balta
- Balta is located in Russell County
Stickney
(13 miles [20.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Stickney. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Stickney
- Stickney is located in Barton County
Russell
(13 miles [20.9 km] to the northeast)
- Jump to our Gazetteer entry for Russell
- Russell is located in Russell County
- Population from the 2020 Census: 4,383 people
- Jump to TripAdvisor's Tourism page for Russell <3>
Toulon
(13 miles [20.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Toulon. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Toulon
- Toulon is located in Ellis County
Munjor
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Munjor have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Munjor
- Munjor is located in Ellis County
Otis
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Otis have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Otis
- Otis is located in Rush County
- Population from the 2020 Census: 251 people
- Jump to TripAdvisor's Tourism page for Otis <3>
Emmeram
(15 miles [24.1 km] to the north)
- Jump to our Gazetteer entry for Emmeram
- Emmeram is located in Ellis County
Susank
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Susank have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Susank
- Susank is located in Barton County
- Population from the 2020 Census: 31 people
Catharine
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Catharine have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Catharine
- Catharine is located in Ellis County
- Catharine has also been known as:
- Catherine
Schoenchen
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Schoenchen have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Schoenchen
- Schoenchen is located in Ellis County
- Population from the 2020 Census: 206 people
Liebenthal
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Liebenthal have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Liebenthal
- Liebenthal is located in Rush County
- Population from the 2020 Census: 91 people
Olmitz
(17 miles [27.4 km] to the south)
- Jump to our Gazetteer entry for Olmitz
- Olmitz is located in Barton County
- Population from the 2020 Census: 105 people
- Jump to TripAdvisor's Tourism page for Olmitz <3>
Hays
(17 miles [27.4 km] to the northwest)
- Jump to our Gazetteer entry for Hays
- Hays is located in Ellis County
- Population from the 2020 Census: 20,829 people
- Jump to TripAdvisor's Tourism page for Hays <3>
Bison
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Bison have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bison
- Bison is located in Rush County
- Population from the 2020 Census: 224 people
Boyd ‑ Historic
(19 miles [30.6 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Boyd. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Boyd
- Boyd is located in Barton County
Bunker Hill
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Bunker Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bunker Hill
- Bunker Hill is located in Russell County
- Population from the 2020 Census: 93 people
- Jump to TripAdvisor's Tourism page for Bunker Hill <3>
Antonino
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Antonino have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Antonino
- Antonino is located in Ellis County

Off-the-Road Links ...

The official website for State of Kansas: https://portal.kansas.gov/

Footnotes ...

<1>	Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Winterset Cemetery. The point we use is located at these GPS coordinates - Latitude: 38.7550, Longitude: -99.0311 In this case, the coordinates for the Winterset Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>	An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.