Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the St. Joseph Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the St. Joseph Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the St. Joseph Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Damar
(Less than 2 miles to the northeast)- Jump to our Gazetteer entry for Damar
- Damar is located in Rooks County
- Population from the 2020 Census: 123 people
- Jump to TripAdvisor's Tourism page for Damar <2>
- Palco
(4 miles [6.4 km] to the southeast)- Jump to our Gazetteer entry for Palco
- Palco is located in Rooks County
- Population from the 2020 Census: 262 people
- Bogue
(5 miles [8 km] to the northwest)- Jump to our Gazetteer entry for Bogue
- Bogue is located in Graham County
- Population from the 2020 Census: 131 people
- Bogue has also been known as:
- Wildhorse
- Nicodemus
(6 miles [9.7 km] to the north)- Note: The GPS coordinates that we are using for Nicodemus have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nicodemus
- Nicodemus is located in Graham County
- Jump to TripAdvisor's Tourism page for Nicodemus <2>
- Zurich
(10 miles [16.1 km] to the southeast) - Hill City
(13 miles [20.9 km] to the west)- Note: The GPS coordinates that we are using for Hill City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hill City
- Hill City is located in Graham County
- Population from the 2020 Census: 1,354 people
- Jump to TripAdvisor's Tourism page for Hill City <2>
- Roscoe
(15 miles [24.1 km] to the northwest)- Jump to our Gazetteer entry for Roscoe
- Roscoe is located in Graham County
- Plainville
(17 miles [27.4 km] to the east)- Jump to our Gazetteer entry for Plainville
- Plainville is located in Rooks County
- Population from the 2020 Census: 1,768 people
- Jump to TripAdvisor's Tourism page for Plainville <2>
- Penokee
(19 miles [30.6 km] to the west)- Jump to our Gazetteer entry for Penokee
- Penokee is located in Graham County
- Stockton
(20 miles [32.2 km] to the northeast)- Jump to our Gazetteer entry for Stockton
- Stockton is located in Rooks County
- Population from the 2020 Census: 1,234 people
- Former name for Stockton:
- Stocktown
- Jump to TripAdvisor's Tourism page for Stockton <2>
- Ogallah
(22 miles [35.4 km] to the south)- Jump to our Gazetteer entry for Ogallah
- Ogallah is located in Trego County
- WaKeeney
(24 miles [38.6 km] to the southwest)- Jump to our Gazetteer entry for WaKeeney
- WaKeeney is located in Trego County
- Population from the 2020 Census: 1,738 people
- Jump to TripAdvisor's Tourism page for WaKeeney <2>
- Densmore
(24 miles [38.6 km] to the north)- Jump to our Gazetteer entry for Densmore
- Densmore is located in Norton County
- Codell
(24 miles [38.6 km] to the east)- Jump to our Gazetteer entry for Codell
- Codell is located in Rooks County
- Former name for Codell:
- Florreyville
- Logan
(24 miles [38.6 km] to the north)- Jump to our Gazetteer entry for Logan
- Logan is located in Phillips County
- Population from the 2020 Census: 529 people
- Jump to TripAdvisor's Tourism page for Logan <2>
- Ellis
(25 miles [40.2 km] to the south)- Jump to our Gazetteer entry for Ellis
- Ellis is located in Ellis County
- Population from the 2020 Census: 2,019 people
- Jump to TripAdvisor's Tourism page for Ellis <2>
- Edmond
(25 miles [40.2 km] to the northwest) - Morland
(25 miles [40.2 km] to the west)- Note: The GPS coordinates that we are using for Morland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morland
- Morland is located in Graham County
- Population from the 2020 Census: 143 people
- Jump to TripAdvisor's Tourism page for Morland <2>
- Saint Peter
(27 miles [43.5 km] to the west)- Note: The GPS coordinates that we are using for Saint Peter have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Peter
- Saint Peter is located in Graham County
- Hog Back
(27 miles [43.5 km] to the south) - Speed
(27 miles [43.5 km] to the north) - Woodston
(28 miles [45.1 km] to the east)- Jump to our Gazetteer entry for Woodston
- Woodston is located in Rooks County
- Population from the 2020 Census: 126 people
- Woodston has also been known as:
- Woodston Saw
- Jump to TripAdvisor's Tourism page for Woodston <2>
- Yocemento
(29 miles [46.7 km] to the south) - Lenora
(29 miles [46.7 km] to the northwest)- Note: The GPS coordinates that we are using for Lenora have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lenora
- Lenora is located in Norton County
- Population from the 2020 Census: 229 people
- Jump to TripAdvisor's Tourism page for Lenora <2>
Off-the-Road Links ...
The official website for Rooks County: www.rookscounty.net/
The official website for State of Kansas: https://portal.kansas.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the St. Joseph Cemetery. The point we use is located at these GPS coordinates - Latitude: 39.3045, Longitude: -99.6041 In this case, the coordinates for the St. Joseph Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |