Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Dermot Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Dermot Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Dermot Cemetery. We've listed the following communities based on their distance, with the closest first.
- Platt City ‑ Historic
(12 miles [19.3 km] to the northwest)- Note: We haven't been able to verify our GPS coordinates for Platt City. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Platt City
- Platt City is located in Stanton County
- Platt City has also been known as:
- Platt
- Richfield
(14 miles [22.5 km] to the southwest)- Jump to our Gazetteer entry for Richfield
- Richfield is located in Morton County
- Population from the 2020 Census: 35 people
- Hugoton
(15 miles [24.1 km] to the southeast)- Jump to our Gazetteer entry for Hugoton
- Hugoton is located in Stevens County
- Population from the 2020 Census: 3,678 people
- Former name for Hugoton:
- Hugo
- Jump to TripAdvisor's Tourism page for Hugoton <3>
- Big Bow
(15 miles [24.1 km] to the north)- Jump to our Gazetteer entry for Big Bow
- Big Bow is located in Stanton County
- Rolla
(16 miles [25.7 km] to the south) - Moscow
(18 miles [29 km] to the east)- Note: The GPS coordinates that we are using for Moscow have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moscow
- Moscow is located in Stevens County
- Population from the 2020 Census: 294 people
- Former name for Moscow:
- Mosco
- Jump to TripAdvisor's Tourism page for Moscow <3>
- Ulysses
(19 miles [30.6 km] to the northeast)- Jump to our Gazetteer entry for Ulysses
- Ulysses is located in Grant County
- Population from the 2020 Census: 5,546 people
- Jump to TripAdvisor's Tourism page for Ulysses <3>
- Johnson
(19 miles [30.6 km] to the northwest)- Jump to our Gazetteer entry for Johnson
- Johnson is located in Stanton County
- Population from the 2020 Census: 1,321 people
- Jump to TripAdvisor's Tourism page for Johnson <3>
- Manter
(22 miles [35.4 km] to the northwest)- Note: The GPS coordinates that we are using for Manter have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manter
- Manter is located in Stanton County
- Population from the 2020 Census: 149 people
- Jump to TripAdvisor's Tourism page for Manter <3>
Off-the-Road Links ...
The official website for State of Kansas: https://portal.kansas.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Dermot Cemetery. The point we use is located at these GPS coordinates - Latitude: 37.3451, Longitude: -101.5465 In this case, the coordinates for the Dermot Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |