RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Indiana >> Vanderburgh County >> Stacer >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Indiana

The Commemorative Quarter for Indiana





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Stacer (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Stacer. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most hospitals and doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Stacer is located in Vanderburgh County.

To see how the shape of Indiana's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Vanderburgh County: Gibson, Posey, Warrick & Henderson (KY).

Below are the counties that are near Stacer. For each of these counties, we show a sample of those communities that are closest to Stacer:

  • Vanderburgh County     (The home county of Stacer)
    • The following are listed by their distance from Stacer, with the one closest to Stacer listed first.
    • Inglefield
      (2 miles [3.2 km] to the south)
      • Note: The GPS coordinates that we are using for Inglefield have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Inglefield
      • Inglefield is located in Vanderburgh County
      • Jump to TripAdvisor's Tourism page for Inglefield <2>
    • Darmstadt
      (3 miles [4.8 km] to the south)
      • Note: The GPS coordinates that we are using for Darmstadt have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Darmstadt
      • Darmstadt is located in Vanderburgh County
      • Population from the 2020 Census: 1,442 people
    • Daylight
      (5 miles [8 km] to the southeast)
    • Armstrong
      (5 miles [8 km] to the southwest)
    • Martin
      (6 miles [9.7 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Martin. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Martin
      • Martin is located in Vanderburgh County
      • Google driving directions:
      • From your current location to Martin
      • From Stacer to Martin
    • Highland
      (7 miles [11.3 km] to the south)
      • Note: The GPS coordinates that we are using for Highland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Highland
      • Highland is located in Vanderburgh County
    • Melody Hill
      (8 miles [12.9 km] to the south)
      • Note: The GPS coordinates that we are using for Melody Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Melody Hill
      • Melody Hill is located in Vanderburgh County
    • Kasson
      (9 miles [14.5 km] to the south)
    • Evansville
      (11 miles [17.7 km] to the south)
    • Smythe
      (11 miles [17.7 km] to the south)
    • Cypress
      (16 miles [25.7 km] to the south)
      • Note: The GPS coordinates that we are using for Cypress have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cypress
      • Cypress is located in Vanderburgh County
    • Vaughan
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Vaughan have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vaughan
      • Vaughan is located in Vanderburgh County
  • Dubois County
  • Gibson County
    • The following are listed by their distance from Stacer, with the one closest to Stacer listed first.
    • Warrenton
      (2 miles [3.2 km] to the northeast)
    • Haubstadt
      (3 miles [4.8 km] to the north)
      • Note: The GPS coordinates that we are using for Haubstadt have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Haubstadt
      • Haubstadt is located in Gibson County
      • Population from the 2020 Census: 1,720 people
      • Jump to TripAdvisor's Tourism page for Haubstadt <2>
    • Fort Branch
      (6 miles [9.7 km] to the north)
      • Note: The GPS coordinates that we are using for Fort Branch have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fort Branch
      • Fort Branch is located in Gibson County
      • Population from the 2020 Census: 2,775 people
      • Jump to TripAdvisor's Tourism page for Fort Branch <2>
    • Buckskin
      (9 miles [14.5 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Buckskin. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Buckskin
      • Buckskin is located in Gibson County
      • Google driving directions:
      • From your current location to Buckskin
      • From Stacer to Buckskin
    • Mounts
      (9 miles [14.5 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Mounts. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Mounts
      • Mounts is located in Gibson County
      • Google driving directions:
      • From your current location to Mounts
      • From Stacer to Mounts
    • Owensville
      (10 miles [16.1 km] to the northwest)
    • Mackey
      (11 miles [17.7 km] to the northeast)
    • Douglas
      (13 miles [20.9 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Douglas. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Douglas
      • Douglas is located in Gibson County
      • Google driving directions:
      • From your current location to Douglas
      • From Stacer to Douglas
    • Somerville
      (13 miles [20.9 km] to the northeast)
    • Princeton
      (14 miles [22.5 km] to the north)
    • Francisco
      (14 miles [22.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Francisco have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Francisco
      • Francisco is located in Gibson County
      • Population from the 2020 Census: 558 people
    • Patoka
      (17 miles [27.4 km] to the north)
    • Oakland City
      (17 miles [27.4 km] to the northeast)
  • Knox County
    • The following are listed by their distance from Stacer, with the one closest to Stacer listed first.
    • Decker
      (25 miles [40.2 km] to the north)
    • Beal
      (29 miles [46.7 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Beal. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Beal
      • Beal is located in Knox County
      • Google driving directions:
      • From your current location to Beal
      • From Stacer to Beal
    • Willis
      (30 miles [48.3 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Willis. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Willis
      • Willis is located in Knox County
      • Google driving directions:
      • From your current location to Willis
      • From Stacer to Willis
  • Pike County
    • The following are listed by their distance from Stacer, with the one closest to Stacer listed first.
    • Spurgeon
      (18 miles [29 km] to the northeast)
      • Note: The GPS coordinates that we are using for Spurgeon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Spurgeon
      • Spurgeon is located in Pike County
      • Population from the 2020 Census: 201 people
    • Oakland City Junction
      (19 miles [30.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Oakland City Junction have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oakland City Junction
      • Oakland City Junction is located in Pike County
    • Oatsville
      (19 miles [30.6 km] to the northeast)
    • Union
      (23 miles [37 km] to the north)
    • Glezen
      (23 miles [37 km] to the northeast)
    • Stendal
      (24 miles [38.6 km] to the east)
      • Note: The GPS coordinates that we are using for Stendal have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stendal
      • Stendal is located in Pike County
    • Winslow
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Winslow have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Winslow
      • Winslow is located in Pike County
      • Population from the 2020 Census: 829 people
      • Jump to TripAdvisor's Tourism page for Winslow <2>
    • Petersburg
      (28 miles [45.1 km] to the northeast)
    • Velpen
      (28 miles [45.1 km] to the northeast)
    • Alford
      (29 miles [46.7 km] to the northeast)
    • Whiteoak
      (29 miles [46.7 km] to the northeast)
    • White Sulphur Springs
      (30 miles [48.3 km] to the northeast)
  • Posey County
    • The following are listed by their distance from Stacer, with the one closest to Stacer listed first.
    • Saint Wendel
      (7 miles [11.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Saint Wendel have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Wendel
      • Saint Wendel is located in Posey County
    • Cynthiana
      (8 miles [12.9 km] to the west)
    • Blairsville
      (11 miles [17.7 km] to the southwest)
    • Poseyville
      (11 miles [17.7 km] to the west)
    • Wadesville
      (12 miles [19.3 km] to the west)
    • Hepburn
      (13 miles [20.9 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Hepburn. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Hepburn
      • Hepburn is located in Posey County
      • Google driving directions:
      • From your current location to Hepburn
      • From Stacer to Hepburn
    • Stewartsville
      (14 miles [22.5 km] to the west)
    • Oliver
      (16 miles [25.7 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Oliver. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Oliver
      • Oliver is located in Posey County
      • Google driving directions:
      • From your current location to Oliver
      • From Stacer to Oliver
    • Barrett
      (16 miles [25.7 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Barrett. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Barrett
      • Barrett is located in Posey County
      • Google driving directions:
      • From your current location to Barrett
      • From Stacer to Barrett
    • Caborn
      (17 miles [27.4 km] to the southwest)
    • Bufkin
      (18 miles [29 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Bufkin. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Bufkin
      • Bufkin is located in Posey County
      • Google driving directions:
      • From your current location to Bufkin
      • From Stacer to Bufkin
    • Springfield
      (18 miles [29 km] to the southwest)
    • Griffin
      (19 miles [30.6 km] to the west)
  • Spencer County
    • The following are listed by their distance from Stacer, with the one closest to Stacer listed first.
    • Hatfield
      (25 miles [40.2 km] to the southeast)
    • Richland City
      (25 miles [40.2 km] to the southeast)
    • Bloomfield
      (26 miles [41.8 km] to the east)
    • Eureka
      (26 miles [41.8 km] to the southeast)
    • Pigeon
      (27 miles [43.5 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Pigeon. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Pigeon
      • Pigeon is located in Spencer County
      • Google driving directions:
      • From your current location to Pigeon
      • From Stacer to Pigeon
    • Gentryville
      (29 miles [46.7 km] to the east)
    • Chrisney
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for Chrisney have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chrisney
      • Chrisney is located in Spencer County
      • Population from the 2020 Census: 467 people
      • Jump to TripAdvisor's Tourism page for Chrisney <2>
    • Kercheval
      (30 miles [48.3 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Kercheval. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Kercheval
      • Kercheval is located in Spencer County
      • Google driving directions:
      • From your current location to Kercheval
      • From Stacer to Kercheval
    • Lincoln City
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for Lincoln City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lincoln City
      • Lincoln City is located in Spencer County
      • Jump to TripAdvisor's Tourism page for Lincoln City <2>
    • Rockport Junction
      (30 miles [48.3 km] to the east)
    • Reo
      (30 miles [48.3 km] to the southeast)
  • Warrick County
    • The following are listed by their distance from Stacer, with the one closest to Stacer listed first.
    • Elberfeld
      (6 miles [9.7 km] to the east)
      • Note: The GPS coordinates that we are using for Elberfeld have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elberfeld
      • Elberfeld is located in Warrick County
      • Population from the 2020 Census: 661 people
      • Jump to TripAdvisor's Tourism page for Elberfeld <2>
    • Wheatonville
      (6 miles [9.7 km] to the northeast)
    • Baugh City
      (11 miles [17.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Baugh City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Baugh City
      • Baugh City is located in Warrick County
    • Stevenson
      (11 miles [17.7 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Stevenson. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Stevenson
      • Stevenson is located in Warrick County
      • Google driving directions:
      • From your current location to Stevenson
      • From Stacer to Stevenson
    • Chandler
      (12 miles [19.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Chandler have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chandler
      • Chandler is located in Warrick County
      • Population from the 2020 Census: 3,288 people
    • Graham Valley
      (14 miles [22.5 km] to the east)
    • Lynnville
      (14 miles [22.5 km] to the east)
      • Note: The GPS coordinates that we are using for Lynnville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lynnville
      • Lynnville is located in Warrick County
      • Population from the 2020 Census: 977 people
      • Jump to TripAdvisor's Tourism page for Lynnville <2>
    • Newburgh
      (16 miles [25.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Newburgh have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Newburgh
      • Newburgh is located in Warrick County
      • Population from the 2020 Census: 3,285 people
      • Jump to TripAdvisor's Tourism page for Newburgh <2>
    • Boonville
      (17 miles [27.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Boonville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Boonville
      • Boonville is located in Warrick County
      • Population from the 2020 Census: 6,409 people
      • Jump to TripAdvisor's Tourism page for Boonville <2>
    • Dickeyville ‑ Historic
      (18 miles [29 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Dickeyville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Dickeyville
      • Dickeyville is located in Warrick County
      • Google driving directions:
      • From your current location to Dickeyville
      • From Stacer to Dickeyville
    • Dayville
      (18 miles [29 km] to the southeast)
    • De Gonia Springs
      (21 miles [33.8 km] to the east)
    • Folsomville
      (21 miles [33.8 km] to the east)
  • Edwards County (IL)
    • The following are listed by their distance from Stacer, with the one closest to Stacer listed first.
    • Browns
      (27 miles [43.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Browns have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Browns
      • Browns is located in Edwards County (IL)
      • Population from the 2020 Census: 128 people
      • Jump to TripAdvisor's Tourism page for Browns <2>
    • Red Top
      (29 miles [46.7 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Red Top. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Red Top
      • Red Top is located in Edwards County (IL)
      • Google driving directions:
      • From your current location to Red Top
      • From Stacer to Red Top
  • Lawrence County (IL)
  • Wabash County (IL)
  • White County (IL)
    • The following are listed by their distance from Stacer, with the one closest to Stacer listed first.
    • Calvin
      (24 miles [38.6 km] to the west)
    • Grayville
      (24 miles [38.6 km] to the west)
      • Note: The GPS coordinates that we are using for Grayville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Grayville
      • Grayville is located in White County (IL)
      • Population from the 2020 Census: 1,543 people
      • Jump to TripAdvisor's Tourism page for Grayville <2>
    • Phillipstown
      (24 miles [38.6 km] to the west)
      • Note: The GPS coordinates that we are using for Phillipstown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Phillipstown
      • Phillipstown is located in White County (IL)
      • Population from the 2020 Census: 40 people
    • Crossville
      (27 miles [43.5 km] to the west)
      • Note: The GPS coordinates that we are using for Crossville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Crossville
      • Crossville is located in White County (IL)
      • Population from the 2020 Census: 687 people
      • Jump to TripAdvisor's Tourism page for Crossville <2>
    • Maunie
      (27 miles [43.5 km] to the west)
      • Note: The GPS coordinates that we are using for Maunie have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Maunie
      • Maunie is located in White County (IL)
      • Population from the 2020 Census: 128 people
      • Jump to TripAdvisor's Tourism page for Maunie <2>
  • Daviess County (KY)
    • Birk City
      (29 miles [46.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Birk City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Birk City
      • Birk City is located in Daviess County (KY)
  • Henderson County (KY)
    • The following are listed by their distance from Stacer, with the one closest to Stacer listed first.
    • White City
      (13 miles [20.9 km] to the south)
      • Note: The GPS coordinates that we are using for White City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for White City
      • White City is located in Henderson County (KY)
    • Baskett
      (19 miles [30.6 km] to the south)
      • Note: The GPS coordinates that we are using for Baskett have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Baskett
      • Baskett is located in Henderson County (KY)
    • Henderson
      (21 miles [33.8 km] to the south)
    • Spottsville
      (21 miles [33.8 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Spottsville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Spottsville
      • Spottsville is located in Henderson County (KY)
      • Google driving directions:
      • From your current location to Spottsville
      • From Stacer to Spottsville
    • Carlinburg
      (22 miles [35.4 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Carlinburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Carlinburg
      • Carlinburg is located in Henderson County (KY)
      • Google driving directions:
      • From your current location to Carlinburg
      • From Stacer to Carlinburg
    • Reed
      (23 miles [37 km] to the southeast)
    • Bluff City
      (25 miles [40.2 km] to the southeast)
    • Smith Mills
      (26 miles [41.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Smith Mills have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Smith Mills
      • Smith Mills is located in Henderson County (KY)
    • Hebbardsville
      (27 miles [43.5 km] to the southeast)
    • Corydon
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Corydon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Corydon
      • Corydon is located in Henderson County (KY)
      • Population from the 2020 Census: 685 people
      • Jump to TripAdvisor's Tourism page for Corydon <2>
    • Niagara
      (29 miles [46.7 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Niagara. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Niagara
      • Niagara is located in Henderson County (KY)
      • Google driving directions:
      • From your current location to Niagara
      • From Stacer to Niagara
  • Union County (KY)

For an expanded list of the communities that are closest to Stacer, see our County-by-County Page for Stacer.

Cemeteries Near Stacer ...

Below are cemeteries that are in the vicinity of Stacer.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Stacer covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Stacer, with the one closest to Stacer listed first.

  • Trinity Parish Cemetery
    (2 miles [3.2 km] to the east)
    • Jump to our Gazetteer entry for the Trinity Parish Cemetery
    • Note: The GPS coordinates that we are using for the Trinity Parish Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Marchand Cemetery
    (2 miles [3.2 km] to the northeast)
  • Withrow Cemetery
    (2 miles [3.2 km] to the northeast)
  • Powell Cemetery
    (3 miles [4.8 km] to the northwest)
    • Jump to our Gazetteer entry for the Powell Cemetery
    • Note: The GPS coordinates that we are using for the Powell Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Blue Grass Cemetery
    (4 miles [6.4 km] to the southeast)
    • Jump to our Gazetteer entry for the Blue Grass Cemetery
    • Note: The GPS coordinates that we are using for the Blue Grass Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Stunkel Cemetery
    (4 miles [6.4 km] to the northeast)
    • Jump to our Gazetteer entry for the Stunkel Cemetery
    • Note: The GPS coordinates that we are using for the Stunkel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Williams Cemetery
    (4 miles [6.4 km] to the northwest)
    • Jump to our Gazetteer entry for the Williams Cemetery
    • Note: The GPS coordinates that we are using for the Williams Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Oak Ridge Cemetery
    (5 miles [8 km] to the south)
    • Jump to our Gazetteer entry for the Oak Ridge Cemetery
    • Note: The GPS coordinates that we are using for the Oak Ridge Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Nobles Cemetery
    (5 miles [8 km] to the east)
    • Jump to our Gazetteer entry for the Nobles Cemetery
    • Note: The GPS coordinates that we are using for the Nobles Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Richter Cemetery
    (6 miles [9.7 km] to the south)
    • Jump to our Gazetteer entry for the Richter Cemetery
    • Note: The GPS coordinates that we are using for the Richter Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Zion Cemetery
    (6 miles [9.7 km] to the east)
    • Jump to our Gazetteer entry for the Zion Cemetery
    • Note: The GPS coordinates that we are using for the Zion Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Northview Cemetery
    (6 miles [9.7 km] to the east)
    • Jump to our Gazetteer entry for the Northview Cemetery
    • Note: The GPS coordinates that we are using for the Northview Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Continue List   (327 more) ...

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that in 1895, Stacer had railroad service and no post office.

These communities are listed based on their distance from Stacer, with the one closest to Stacer listed first.

  • Inglefield
    (2 miles [3.2 km] to the south)
    • Note: The GPS coordinates that we are using for Inglefield have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Inglefield
    • Inglefield is located in Vanderburgh County
    • Jump to TripAdvisor's Tourism page for Inglefield <2>
  • Saint James
    (2 miles [3.2 km] to the north)
    • Note: The GPS coordinates that we are using for Saint James have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Saint James
    • Saint James is located in Gibson County
  • Haubstadt
    (3 miles [4.8 km] to the north)
    • Note: The GPS coordinates that we are using for Haubstadt have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Haubstadt
    • Haubstadt is located in Gibson County
    • Population from the 2020 Census: 1,720 people
    • Jump to TripAdvisor's Tourism page for Haubstadt <2>
  • Hillsdale
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for Hillsdale have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hillsdale
    • Hillsdale is located in Vanderburgh County
  • Armstrong
    (5 miles [8 km] to the southwest)
  • Earle
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Earle have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Earle
    • Earle is located in Vanderburgh County
  • Elliott
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Elliott have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Elliott
    • Elliott is located in Vanderburgh County
  • Martin
    (6 miles [9.7 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for Martin. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Martin
    • Martin is located in Vanderburgh County
    • Google driving directions:
    • From your current location to Martin
    • From Stacer to Martin
  • McCutchanville
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for McCutchanville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for McCutchanville
    • McCutchanville is located in Vanderburgh County
  • Elberfeld
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for Elberfeld have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Elberfeld
    • Elberfeld is located in Warrick County
    • Population from the 2020 Census: 661 people
    • Jump to TripAdvisor's Tourism page for Elberfeld <2>
  • Fort Branch
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for Fort Branch have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fort Branch
    • Fort Branch is located in Gibson County
    • Population from the 2020 Census: 2,775 people
    • Jump to TripAdvisor's Tourism page for Fort Branch <2>
  • Saint Wendel
    (7 miles [11.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Saint Wendel have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Saint Wendel
    • Saint Wendel is located in Posey County
  • Continue List   (15 more) ...
    • McGary
      (8 miles [12.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for McGary have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McGary
      • McGary is located in Gibson County
    • Cynthiana
      (8 miles [12.9 km] to the west)
    • Kasson
      (9 miles [14.5 km] to the south)

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Stacer. See our List of 1890's Communities around Stacer.

Newspapers Published in Stacer ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 28 newspapers that have been published in the area around Stacer.

Although we're unaware of any newspapers that were published in the immediate area of Stacer, there are papers which were published within 21 miles [33.8 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Stacer.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Stacer:

Unfortunately, we don't know of a website for Stacer. If you can help, please contact us through our Feedback Page.

The official website for Vanderburgh County: www.vanderburghgov.org/

The official website for State of Indiana: https://www.in.gov

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Stacer, please let us know so that we can improve our accuracy.
<6>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Stacer) to Point B.Our distance measurements begin at a specific point in Stacer. The point we use is located at these GPS coordinates - Latitude: 38.1484, Longitude: -87.5657       In this case, the coordinates for Stacer have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 13 Jul 2025