Welcome to Stacer ...

Stacer is located in Vanderburgh County<1>.

While we don't have a date for the founding of Stacer, you might get a feel for it by knowing that the earliest mention that we've found (so far) was in a book dated 1895.

Stacer is 450 feet [137 m] above sea level.<2>.

Time Zone: Stacer lies in the Central Time Zone (CST/CDT) and observes daylight saving time

Note: If you travel east from Stacer (for example, toward Holland), you will leave Central Time and cross into the Eastern Time Zone (EST/EDT).

Area Codes for Stacer: 812 & 930<3>

Communities near Stacer ...

We have created a list of 10 communities that are near Stacer.

Evansville
(11 miles [17.7 km] to the south)
- Evansville is located in Vanderburgh County
- Jump to our Gazetteer entry for Evansville
- Population from the 2020 Census: 118,407 people
- Jump to TripAdvisor's Tourism page for Evansville <4>
- Google driving directions:
- From your current location to Evansville
- From Stacer to Evansville
Princeton
(14 miles [22.5 km] to the north)
- Princeton is located in Gibson County
- Jump to our Gazetteer entry for Princeton
- Population from the 2020 Census: 8,793 people
- Jump to TripAdvisor's Tourism page for Princeton <4>
- Google driving directions:
- From your current location to Princeton
- From Stacer to Princeton
Boonville
(17 miles [27.4 km] to the southeast)
- Boonville is located in Warrick County
- Jump to our Gazetteer entry for Boonville
- Population from the 2020 Census: 6,409 people
- Jump to TripAdvisor's Tourism page for Boonville <4>
Chandler
(12 miles [19.3 km] to the southeast)
- Chandler is located in Warrick County
- Jump to our Gazetteer entry for Chandler
- Population from the 2020 Census: 3,288 people
Newburgh
(16 miles [25.7 km] to the southeast)
- Newburgh is located in Warrick County
- Jump to our Gazetteer entry for Newburgh
- Population from the 2020 Census: 3,285 people
- Jump to TripAdvisor's Tourism page for Newburgh <4>
Fort Branch
(6 miles [9.7 km] to the north)
- Fort Branch is located in Gibson County
- Jump to our Gazetteer entry for Fort Branch
- Population from the 2020 Census: 2,775 people
- Jump to TripAdvisor's Tourism page for Fort Branch <4>
Oakland City
(17 miles [27.4 km] to the northeast)
- Oakland City is located in Gibson County
- Jump to our Gazetteer entry for Oakland City
- Population from the 2020 Census: 2,407 people
- Jump to TripAdvisor's Tourism page for Oakland City <4>
- Google driving directions:
- From your current location to Oakland City
- From Stacer to Oakland City
Haubstadt
(3 miles [4.8 km] to the north)
- Haubstadt is located in Gibson County
- Jump to our Gazetteer entry for Haubstadt
- Population from the 2020 Census: 1,720 people
- Jump to TripAdvisor's Tourism page for Haubstadt <4>
Darmstadt
(3 miles [4.8 km] to the south)
- Darmstadt is located in Vanderburgh County
- Jump to our Gazetteer entry for Darmstadt
- Population from the 2020 Census: 1,442 people
Owensville
(10 miles [16.1 km] to the northwest)
- Owensville is located in Gibson County
- Jump to our Gazetteer entry for Owensville
- Population from the 2020 Census: 1,356 people
- Jump to TripAdvisor's Tourism page for Owensville <4>
- Google driving directions:
- From your current location to Owensville
- From Stacer to Owensville

To Help With Your Genealogy Research ...

We have a couple of sections for those tracing their genealogy.

We created a list of cemeteries that are in the area around Stacer. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Stacer.

Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Stacer. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Stacer.

We also have a detailed list of newspapers that have been published in the area around Stacer. See our Newspapers Page for Stacer.

TripAdvisor Tourism Pages for Stacer ...

Looking for more information about Stacer? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.

While we are unaware of a Tourism page that is specific to Stacer, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Stacer.

Adding Stacer to Our Gazetteer ...

We originally found mention of Stacer in both the FIPS-55 and the GNIS. For more information, see the FIPS and GNIS Codes sections on our Miscellaneous Page.

From our notes, the earliest published mention we've found (so far) for Stacer was in the book titled Business Atlas and Shippers' Guide (1895).

For more details, see References and Mentions for Stacer.

Footnotes ...

<1>	If you're interested in how the shape of Indiana's counties, including Vanderburgh, have changed over time, we recommend the Atlas of Historical County Boundaries.
<2>	The elevation is an estimate for the area around Stacer - it will be higher in some places and lower in others.
<3>	When there's a risk of an area code running out of phone numbers, an 'Overlay Area Code' is created that has the same geographic boundaries as the existing area code. In this case, the 812 code has been Overlayed with the 930 area code. New phone numbers in the Stacer area will be assigned with one of these codes: 812 or 930. As a result, placing a call in the Stacer area will require 10-digit dialing (where you enter both the area code and then the phone number).
<4>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.