Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Lena had a population of 318 people in 1895 with a post office and railroad service.
The following communities are listed based on their distance from Lena, with the one closest to Lena listed first.
- Carbon
(Less than 2 miles to the south)
- Note: The GPS coordinates that we are using for Carbon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carbon
- Carbon is located in Clay County
- Population from the 2020 Census: 379 people
- Perth
(3 miles [4.8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Perth. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Perth
- Perth is located in Clay County
- Google driving directions:
- From your current location to Perth
- From Lena to Perth
- Cardonia
(3 miles [4.8 km] to the south)
- Note: The GPS coordinates that we are using for Cardonia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cardonia
- Cardonia is located in Clay County
- Benwood
(3 miles [4.8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Benwood. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Benwood
- Benwood is located in Clay County
- Google driving directions:
- From your current location to Benwood
- From Lena to Benwood
- Mansfield
(4 miles [6.4 km] to the north)
- Bridgeton
(4 miles [6.4 km] to the northwest)
- Brazil
(5 miles [8 km] to the south)
- Knightsville
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Knightsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Knightsville
- Knightsville is located in Clay County
- Population from the 2020 Census: 769 people
- Harmony
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Harmony have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harmony
- Harmony is located in Clay County
- Population from the 2020 Census: 639 people
- Coal Bluff
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Coal Bluff have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coal Bluff
- Coal Bluff is located in Vigo County
- Fontanet
(7 miles [11.3 km] to the west)
- Turner
(7 miles [11.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Turner. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Turner
- Turner is located in Clay County
- Google driving directions:
- From your current location to Turner
- From Lena to Turner
- Vivalia
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Vivalia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vivalia
- Vivalia is located in Parke County
- Ferndale
(7 miles [11.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Ferndale. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ferndale
- Ferndale is located in Parke County
- Google driving directions:
- From your current location to Ferndale
- From Lena to Ferndale
- Reelsville
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Reelsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reelsville
- Reelsville is located in Putnam County
- Jessup
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Jessup have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jessup
- Jessup is located in Parke County
- Cloverland
(9 miles [14.5 km] to the southwest)
- Staunton
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Staunton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Staunton
- Staunton is located in Clay County
- Population from the 2020 Census: 502 people
- Hoosierville
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Hoosierville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hoosierville
- Hoosierville is located in Clay County
- Asherville
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Asherville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Asherville
- Asherville is located in Clay County
- Catlin
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Catlin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Catlin
- Catlin is located in Parke County
- Rosedale
(9 miles [14.5 km] to the west)
- Burnett
(10 miles [16.1 km] to the southwest)
- Manhattan
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Manhattan have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manhattan
- Manhattan is located in Putnam County
- Clinton Falls
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Clinton Falls have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clinton Falls
- Clinton Falls is located in Putnam County
- Hollandsburg
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Hollandsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hollandsburg
- Hollandsburg is located in Parke County
- Bellmore
(10 miles [16.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Bellmore. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bellmore
- Bellmore is located in Parke County
- Google driving directions:
- From your current location to Bellmore
- From Lena to Bellmore
- Coxville
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Coxville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coxville
- Coxville is located in Parke County
Off-the-Road Links ...
The official website for Clay County: www.claycountyin.gov/
The official website for State of Indiana: https://www.in.gov
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Lena, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |