Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Townsley Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Townsley Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Townsley Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Mackey
(Less than 2 miles to the west)- Jump to our Gazetteer entry for Mackey
- Mackey is located in Gibson County
- Population from the 2020 Census: 134 people
- Somerville
(2 miles [3.2 km] to the northwest)- Jump to our Gazetteer entry for Somerville
- Somerville is located in Gibson County
- Population from the 2020 Census: 291 people
- Jump to TripAdvisor's Tourism page for Somerville <2>
- Buckskin
(3 miles [4.8 km] to the southwest) - Lynnville
(4 miles [6.4 km] to the southeast)- Note: The GPS coordinates that we are using for Lynnville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lynnville
- Lynnville is located in Warrick County
- Population from the 2020 Census: 977 people
- Jump to TripAdvisor's Tourism page for Lynnville <2>
- Spurgeon
(5 miles [8 km] to the east) - Oakland City
(5 miles [8 km] to the north)- Jump to our Gazetteer entry for Oakland City
- Oakland City is located in Gibson County
- Population from the 2020 Census: 2,407 people
- Jump to TripAdvisor's Tourism page for Oakland City <2>
- Oakland City Junction
(6 miles [9.7 km] to the northeast)- Note: The GPS coordinates that we are using for Oakland City Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oakland City Junction
- Oakland City Junction is located in Pike County
- Wheatonville
(7 miles [11.3 km] to the southwest)- Jump to our Gazetteer entry for Wheatonville
- Wheatonville is located in Warrick County
- Graham Valley
(7 miles [11.3 km] to the southeast)- Jump to our Gazetteer entry for Graham Valley
- Graham Valley is located in Warrick County
- Francisco
(7 miles [11.3 km] to the northwest) - Elberfeld
(8 miles [12.9 km] to the southwest)- Note: The GPS coordinates that we are using for Elberfeld have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elberfeld
- Elberfeld is located in Warrick County
- Population from the 2020 Census: 661 people
- Jump to TripAdvisor's Tourism page for Elberfeld <2>
- Dongola
(8 miles [12.9 km] to the north)- Jump to our Gazetteer entry for Dongola
- Dongola is located in Gibson County
- Dickeyville ‑ Historic
(9 miles [14.5 km] to the southeast)- Note: The GPS coordinates that we are using for Dickeyville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dickeyville
- Dickeyville is located in Warrick County
- Douglas
(9 miles [14.5 km] to the northwest) - Oatsville
(10 miles [16.1 km] to the north)- Jump to our Gazetteer entry for Oatsville
- Oatsville is located in Pike County
- Warrenton
(11 miles [17.7 km] to the southwest)- Jump to our Gazetteer entry for Warrenton
- Warrenton is located in Gibson County
- Stendal
(11 miles [17.7 km] to the east) - Winslow
(11 miles [17.7 km] to the northeast)- Note: The GPS coordinates that we are using for Winslow have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Winslow
- Winslow is located in Pike County
- Population from the 2020 Census: 829 people
- Jump to TripAdvisor's Tourism page for Winslow <2>
- Glezen
(11 miles [17.7 km] to the north)- Jump to our Gazetteer entry for Glezen
- Glezen is located in Pike County
- Fort Branch
(11 miles [17.7 km] to the west)- Note: The GPS coordinates that we are using for Fort Branch have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Branch
- Fort Branch is located in Gibson County
- Population from the 2020 Census: 2,775 people
- Jump to TripAdvisor's Tourism page for Fort Branch <2>
- Haubstadt
(12 miles [19.3 km] to the west)- Note: The GPS coordinates that we are using for Haubstadt have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Haubstadt
- Haubstadt is located in Gibson County
- Population from the 2020 Census: 1,720 people
- Jump to TripAdvisor's Tourism page for Haubstadt <2>
- Stacer
(13 miles [20.9 km] to the southwest) - Daylight
(13 miles [20.9 km] to the southwest)- Jump to our Gazetteer entry for Daylight
- Daylight is located in Vanderburgh County
- Folsomville
(13 miles [20.9 km] to the southeast)- Jump to our Gazetteer entry for Folsomville
- Folsomville is located in Warrick County
- Princeton
(13 miles [20.9 km] to the northwest)- Jump to our Gazetteer entry for Princeton
- Princeton is located in Gibson County
- Population from the 2020 Census: 8,793 people
- Jump to TripAdvisor's Tourism page for Princeton <2>
Off-the-Road Links ...
The official website for State of Indiana: https://www.in.gov
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Townsley Cemetery. The point we use is located at these GPS coordinates - Latitude: 38.2534, Longitude: -87.3567 In this case, the coordinates for the Townsley Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |