|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Tableman Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Tableman Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Tableman Cemetery. We've listed the following communities based on their distance, with the closest first.
- Clay City
(Less than 2 miles to the north)
- Note: The GPS coordinates that we are using for Clay City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clay City
- Clay City is located in Spencer County
- Lamar
(2 miles [3.2 km] to the east)
- Note: The GPS coordinates that we are using for Lamar have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lamar
- Lamar is located in Spencer County
- Jump to TripAdvisor's Tourism page for Lamar <3>
- Kercheval
(3 miles [4.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Kercheval. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Kercheval
- Kercheval is located in Spencer County
- Lincoln City
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Lincoln City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lincoln City
- Lincoln City is located in Spencer County
- Jump to TripAdvisor's Tourism page for Lincoln City <3>
- Santa Claus
(4 miles [6.4 km] to the northeast)
- Rockport Junction
(4 miles [6.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Rockport Junction. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rockport Junction
- Rockport Junction is located in Spencer County
- Chrisney
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Chrisney have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chrisney
- Chrisney is located in Spencer County
- Population from the 2020 Census: 467 people
- Jump to TripAdvisor's Tourism page for Chrisney <3>
- Gentryville
(5 miles [8 km] to the northwest)
- Evanston
(6 miles [9.7 km] to the east)
- Jump to our Gazetteer entry for Evanston
- Evanston is located in Spencer County
- Pigeon
(6 miles [9.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Pigeon. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Pigeon
- Pigeon is located in Spencer County
- Dale
(7 miles [11.3 km] to the north)
- Fulda
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Fulda have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fulda
- Fulda is located in Spencer County
- Jump to TripAdvisor's Tourism page for Fulda <3>
- Mariah Hill
(7 miles [11.3 km] to the north)
- Bloomfield
(8 miles [12.9 km] to the west)
- Jump to our Gazetteer entry for Bloomfield
- Bloomfield is located in Spencer County
- Grandview
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Grandview have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grandview
- Grandview is located in Spencer County
- Population from the 2020 Census: 720 people
- Jump to TripAdvisor's Tourism page for Grandview <3>
- Lewisport
(8 miles [12.9 km] to the south)
- Rock Hill
(9 miles [14.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Rock Hill. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rock Hill
- Rock Hill is located in Spencer County
- Troy
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Troy have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Troy
- Troy is located in Perry County
- Population from the 2020 Census: 403 people
- Jump to TripAdvisor's Tourism page for Troy <3>
- Tennyson
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Tennyson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tennyson
- Tennyson is located in Warrick County
- Population from the 2020 Census: 303 people
- Jump to TripAdvisor's Tourism page for Tennyson <3>
- Eames
(9 miles [14.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Eames. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Eames
- Eames is located in Warrick County
- Saint Meinrad
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Saint Meinrad have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Meinrad
- Saint Meinrad is located in Spencer County
- Jump to TripAdvisor's Tourism page for Saint Meinrad <3>
- Heilman
(10 miles [16.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Heilman. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Heilman
- Heilman is located in Warrick County
- Tell City
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Tell City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tell City
- Tell City is located in Perry County
- Population from the 2020 Census: 7,179 people
- Jump to TripAdvisor's Tourism page for Tell City <3>
- Ferdinand
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Ferdinand have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ferdinand
- Ferdinand is located in Dubois County
- Population from the 2020 Census: 2,253 people
- Jump to TripAdvisor's Tourism page for Ferdinand <3>
- Folsomville
(12 miles [19.3 km] to the west)
- Jump to our Gazetteer entry for Folsomville
- Folsomville is located in Warrick County
- De Gonia Springs
(12 miles [19.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for De Gonia Springs. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for De Gonia Springs
- De Gonia Springs is located in Warrick County
Off-the-Road Links ...
The official website for State of Indiana: https://www.in.gov
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Tableman Cemetery. The point we use is located at these GPS coordinates - Latitude: 38.0603, Longitude: -86.9533 In this case, the coordinates for the Tableman Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|