Nearest Communities to Atomic City,
Listed County-By-County
The purpose of this page is to identify those communities that are closest to Atomic City, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Atomic City:
We have great-grandparents who lived in a small city in the southeast corner of their home county. During their lives, most hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.
When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.
Please note that when we give a distance, it's a 'straight-line' distance from Atomic City.<1>
If you're researching your genealogy, we hope that the following information helps.
Atomic City is located in Bingham County.
The following 7 counties adjoin and form the boundaries of Bingham County: Bannock, Blaine, Bonneville, Butte, Caribou, Jefferson & Power.
Our Gazetteer shows that there are 35 communities within 40 miles [64.4 km]<1> of Atomic City. Of these communities, 7 are located in counties other than Bingham County.
We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.
After starting with the home county for Atomic City (which is Bingham County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Atomic City
For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.
- Bingham County (where Atomic City resides)
- County Website: www.co.bingham.id.us/
- County Seat for Bingham: Blackfoot
- Genealogy Websites ...
- Nearest Communities to Atomic City ...
- These communities are listed by their distance from Atomic City.
- Cerro Grande
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Cerro Grande have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cerro Grande
- Cerro Grande is located in Bingham County
- Taber
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Taber have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Taber
- Taber is located in Bingham County
- Fullmer
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Fullmer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fullmer
- Fullmer is located in Bingham County
- Olsen
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Olsen have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Olsen
- Olsen is located in Bingham County
- Havens
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Havens have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Havens
- Havens is located in Bingham County
- Coffee Point
(21 miles [33.8 km] to the south)
- Rockford
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Rockford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockford
- Rockford is located in Bingham County
- Rouse
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Rouse have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rouse
- Rouse is located in Bingham County
- Aberdeen Junction
(23 miles [37 km] to the southeast)
- Liberty
(23 miles [37 km] to the southeast)
- Thomas
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Thomas have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Thomas
- Thomas is located in Bingham County
- Moreland
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Moreland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moreland
- Moreland is located in Bingham County
- Jump to TripAdvisor's Tourism page for Moreland <5>
- Continue List (16 more) ...
- Pingree
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Pingree have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pingree
- Pingree is located in Bingham County
- Jump to TripAdvisor's Tourism page for Pingree <5>
- Rising River
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Rising River have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rising River
- Rising River is located in Bingham County
- Springfield
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Springfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springfield
- Springfield is located in Bingham County
- Jump to TripAdvisor's Tourism page for Springfield <5>
- Clarkson
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Clarkson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarkson
- Clarkson is located in Bingham County
- McDonaldville
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for McDonaldville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McDonaldville
- McDonaldville is located in Bingham County
- Riverside
(25 miles [40.2 km] to the southeast)
- Grandview
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Grandview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grandview
- Grandview is located in Bingham County
- Aiken
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Aiken have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Aiken
- Aiken is located in Bingham County
- Groveland
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Groveland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Groveland
- Groveland is located in Bingham County
- Peterson ‑ Historic
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Peterson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peterson
- Peterson is located in Bingham County
- Collins
(27 miles [43.5 km] to the southeast)
- Rose
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Rose have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rose
- Rose is located in Bingham County
- Sterling
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Sterling have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sterling
- Sterling is located in Bingham County
- Blackfoot
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Blackfoot have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blackfoot
- Blackfoot is located in Bingham County
- Population from the 2020 Census: 12,025 people
- Jump to TripAdvisor's Tourism page for Blackfoot <5>
- Gibson
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Gibson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gibson
- Gibson is located in Bingham County
- Wapello
(30 miles [48.3 km] to the southeast)
- Butte County
- County Seat for Butte: Arco
- Genealogy Websites ...
- Nearest Communities to Atomic City ...
- These communities are listed by their distance from Atomic City.
- Scoville
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Scoville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Scoville
- Scoville is located in Butte County
- Smith Corrals
(23 miles [37 km] to the west)
- Note: The GPS coordinates that we are using for Smith Corrals have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Smith Corrals
- Smith Corrals is located in Butte County
- Butte City
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Butte City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Butte City
- Butte City is located in Butte County
- Population from the 2020 Census: 69 people
- Howe
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Howe have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howe
- Howe is located in Butte County
- Jump to TripAdvisor's Tourism page for Howe <5>
- Berenice
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Berenice have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Berenice
- Berenice is located in Butte County
- Sweet Sage ‑ Historic
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Sweet Sage have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sweet Sage
- Sweet Sage is located in Butte County
- Arco
(27 miles [43.5 km] to the northwest)
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Atomic City) to Point B.Our distance measurements begin at a specific point in Atomic City. The point we use is located at these GPS coordinates - Latitude: 43.4434, Longitude: -112.8122 |
<2> | Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.
We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.
Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |