RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Iowa >> Jasper County >> Newton >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Iowa

The Commemorative Quarter for Iowa





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Newton. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Newton.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Newton - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 41 communities listed:

  • Albion
    (28 miles [45.1 km] to the north)
    • Note: The GPS coordinates that we are using for Albion have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Albion
    • Albion is located in Marshall County
    • Population from the 2020 Census: 493 people
    • Jump to TripAdvisor's Tourism page for Albion <3>
  • Altoona
    (22 miles [35.4 km] to the west)
    • Note: The GPS coordinates that we are using for Altoona have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Altoona
    • Altoona is located in Polk County
    • Population from the 2020 Census: 19,503 people
    • Jump to TripAdvisor's Tourism page for Altoona <3>
  • Ankeny
    (28 miles [45.1 km] to the west)
    • Note: The GPS coordinates that we are using for Ankeny have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ankeny
    • Ankeny is located in Polk County
    • Population from the 2020 Census: 70,068 people
    • Jump to TripAdvisor's Tourism page for Ankeny <3>
  • Baxter
    (10 miles [16.1 km] to the northwest)
  • Bondurant
    (21 miles [33.8 km] to the west)
    • Note: The GPS coordinates that we are using for Bondurant have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bondurant
    • Bondurant is located in Polk County
    • Population from the 2020 Census: 7,293 people
    • Jump to TripAdvisor's Tourism page for Bondurant <3>
  • Brooklyn
    (30 miles [48.3 km] to the east)
    • Note: The GPS coordinates that we are using for Brooklyn have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brooklyn
    • Brooklyn is located in Poweshiek County
    • Population from the 2020 Census: 1,390 people
    • Jump to TripAdvisor's Tourism page for Brooklyn <3>
  • Cambridge
    (28 miles [45.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Cambridge have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cambridge
    • Cambridge is located in Story County
    • Population from the 2020 Census: 796 people
    • Jump to TripAdvisor's Tourism page for Cambridge <3>
  • Carlisle
    (27 miles [43.5 km] to the southwest)
  • Colfax
    (10 miles [16.1 km] to the west)
  • Colo
    (26 miles [41.8 km] to the northwest)
  • Des Moines
    (30 miles [48.3 km] to the west)
  • Elkhart
    (25 miles [40.2 km] to the west)
  • Grinnell
    (16 miles [25.7 km] to the east)
  • Hartford
    (25 miles [40.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for Hartford have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hartford
    • Hartford is located in Warren County
    • Population from the 2020 Census: 780 people
    • Jump to TripAdvisor's Tourism page for Hartford <3>
  • Haverhill
    (17 miles [27.4 km] to the north)
    • Note: The GPS coordinates that we are using for Haverhill have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Haverhill
    • Haverhill is located in Marshall County
    • Population from the 2020 Census: 168 people
    • Jump to TripAdvisor's Tourism page for Haverhill <3>
  • Kellogg
    (6 miles [9.7 km] to the east)
  • Knoxville
    (26 miles [41.8 km] to the south)
  • Le Grand
    (25 miles [40.2 km] to the northeast)
  • Leighton
    (28 miles [45.1 km] to the southeast)
  • Lynnville
    (15 miles [24.1 km] to the southeast)
  • Malcom
    (24 miles [38.6 km] to the east)
    • Note: The GPS coordinates that we are using for Malcom have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Malcom
    • Malcom is located in Poweshiek County
    • Population from the 2020 Census: 275 people
    • Jump to TripAdvisor's Tourism page for Malcom <3>
  • Marshalltown
    (24 miles [38.6 km] to the north)
  • Maxwell
    (22 miles [35.4 km] to the northwest)
  • Melbourne
    (17 miles [27.4 km] to the north)
  • Mingo
    (13 miles [20.9 km] to the west)
  • Mitchellville
    (16 miles [25.7 km] to the west)
    • Note: The GPS coordinates that we are using for Mitchellville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mitchellville
    • Mitchellville is located in Polk County
    • Population from the 2020 Census: 2,273 people
    • Jump to TripAdvisor's Tourism page for Mitchellville <3>
  • Monroe
    (12 miles [19.3 km] to the south)
  • Montezuma
    (27 miles [43.5 km] to the east)
    • Note: The GPS coordinates that we are using for Montezuma have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Montezuma
    • Montezuma is located in Poweshiek County
    • Population from the 2020 Census: 1,388 people
    • Jump to TripAdvisor's Tourism page for Montezuma <3>
  • Montour
    (25 miles [40.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Montour have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Montour
    • Montour is located in Tama County
    • Population from the 2020 Census: 242 people
    • Jump to TripAdvisor's Tourism page for Montour <3>
  • Nevada
    (30 miles [48.3 km] to the northwest)
  • New Sharon
    (25 miles [40.2 km] to the southeast)
  • Otley
    (16 miles [25.7 km] to the south)
  • Pella
    (21 miles [33.8 km] to the south)
    • Jump to our Gazetteer entry for Pella
    • Pella is located in Marion County
    • Population from the 2020 Census: 10,266 people
    • Jump to TripAdvisor's Tourism page for Pella <3>
  • Pleasant Hill
    (25 miles [40.2 km] to the west)
    • Note: The GPS coordinates that we are using for Pleasant Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pleasant Hill
    • Pleasant Hill is located in Polk County
    • Population from the 2020 Census: 10,025 people
    • Jump to TripAdvisor's Tourism page for Pleasant Hill <3>
  • Pleasantville
    (24 miles [38.6 km] to the southwest)
  • Prairie City
    (12 miles [19.3 km] to the southwest)
  • Runnells
    (20 miles [32.2 km] to the southwest)
  • State Center
    (22 miles [35.4 km] to the north)
    • Note: The GPS coordinates that we are using for State Center have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for State Center
    • State Center is located in Marshall County
    • Population from the 2020 Census: 1,432 people
    • Jump to TripAdvisor's Tourism page for State Center <3>
  • Sully
    (12 miles [19.3 km] to the southeast)
  • Tama
    (30 miles [48.3 km] to the northeast)
  • Toledo
    (30 miles [48.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Toledo have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Toledo
    • Toledo is located in Tama County
    • Population from the 2020 Census: 2,125 people
    • Jump to TripAdvisor's Tourism page for Toledo <3>

The official website for Newton: www.newtongov.org/

The official website for State of Iowa: https://www.iowa.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Newton) to Point B.Our distance measurements begin at a specific point in Newton. The point we use is located at these GPS coordinates - Latitude: 41.6993, Longitude: -93.0387    
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024