Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Hubbard had a population of 452 people in 1895 with a post office and railroad service. In 2020, Hubbard had a population of 793 people.
The following communities are listed based on their distance from Hubbard, with the one closest to Hubbard listed first.
- New Providence
(6 miles [9.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for New Providence. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for New Providence
- New Providence is located in Hardin County
- Population from the 2020 Census: 220 people
- Lawn Hill
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Lawn Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lawn Hill
- Lawn Hill is located in Hardin County
- Radcliffe
(6 miles [9.7 km] to the west)
- Zearing
(9 miles [14.5 km] to the south)
- Hughs
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Hughs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hughs
- Hughs is located in Hardin County
- Owasa
(9 miles [14.5 km] to the northeast)
- Jump to our Gazetteer entry for Owasa
- Owasa is located in Hardin County
- Population from the 2020 Census: 41 people
- McCallsburg
(10 miles [16.1 km] to the southwest)
- Jump to our Gazetteer entry for McCallsburg
- McCallsburg is located in Story County
- Population from the 2020 Census: 320 people
- Gifford
(10 miles [16.1 km] to the east)
- Eldora
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Eldora have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eldora
- Eldora is located in Hardin County
- Population from the 2020 Census: 2,571 people
- Jump to TripAdvisor's Tourism page for Eldora <4>
- Secor ‑ Historic
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Secor have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Secor
- Secor is located in Hardin County
- Union
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Union have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union
- Union is located in Hardin County
- Population from the 2020 Census: 373 people
- Saint Anthony
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Saint Anthony have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Anthony
- Saint Anthony is located in Marshall County
- Population from the 2020 Census: 101 people
- Steamboat Rock
(13 miles [20.9 km] to the northeast)
- Roland
(14 miles [22.5 km] to the southwest)
- Jump to our Gazetteer entry for Roland
- Roland is located in Story County
- Population from the 2020 Census: 1,252 people
- Bangor
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Bangor have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bangor
- Bangor is located in Marshall County
- Iowa Falls
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Iowa Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Iowa Falls
- Iowa Falls is located in Hardin County
- Population from the 2020 Census: 4,940 people
- Jump to TripAdvisor's Tourism page for Iowa Falls <4>
- Ellsworth
(14 miles [22.5 km] to the west)
- Alden
(15 miles [24.1 km] to the north)
- Clemons
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Clemons have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clemons
- Clemons is located in Marshall County
- Population from the 2020 Census: 141 people
- Bromley
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Bromley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bromley
- Bromley is located in Marshall County
- Whitten
(15 miles [24.1 km] to the east)
- Jump to our Gazetteer entry for Whitten
- Whitten is located in Hardin County
- Population from the 2020 Census: 140 people
- Randall
(16 miles [25.7 km] to the west)
- Jump to our Gazetteer entry for Randall
- Randall is located in Hamilton County
- Population from the 2020 Census: 166 people
- Robertson
(16 miles [25.7 km] to the northeast)
- Jump to our Gazetteer entry for Robertson
- Robertson is located in Hardin County
- Story City
(17 miles [27.4 km] to the southwest)
- Minerva
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Minerva have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Minerva
- Minerva is located in Marshall County
- Liscomb
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Liscomb have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Liscomb
- Liscomb is located in Marshall County
- Population from the 2020 Census: 296 people
- Cleves
(17 miles [27.4 km] to the northeast)
- Jump to our Gazetteer entry for Cleves
- Cleves is located in Hardin County
- Abbott
(17 miles [27.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Abbott. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Abbott
- Abbott is located in Hardin County
- Abbott Crossing ‑ Historic
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Abbott Crossing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Abbott Crossing
- Abbott Crossing is located in Hardin County
- Williams
(17 miles [27.4 km] to the northwest)
- Jewell
(17 miles [27.4 km] to the west)
- Jump to our Gazetteer entry for Jewell
- Jewell is located in Hamilton County
- Population from the 2020 Census: 1,138 people
- Jewell has also been known as:
- Jewell Junction
- Jump to TripAdvisor's Tourism page for Jewell <4>
Off-the-Road Links ...
The official website for Hubbard: www.hubbardiowa.com/
The official website for State of Iowa: https://www.iowa.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Hubbard, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |