RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Iowa >> Jasper County >> Goddard >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Iowa

The Commemorative Quarter for Iowa





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Goddard (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Goddard. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most doctors and hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Goddard is located in Jasper County.

To see how the shape of Iowa's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Jasper County: Mahaska, Marion, Marshall, Polk, Poweshiek, Story & Tama.

Below are the counties that are near Goddard. For each of these counties, we show a sample of those communities that are closest to Goddard:

  • Jasper County     (The home county of Goddard)
    • The following are listed by their distance from Goddard, with the one closest to Goddard listed first.
    • Colfax
      (3 miles [4.8 km] to the southwest)
    • Ira
      (4 miles [6.4 km] to the north)
      • Jump to our Gazetteer entry for Ira
      • Ira is located in Jasper County
    • Green Castle
      (4 miles [6.4 km] to the northwest)
      • Jump to our Gazetteer entry for Green Castle
      • Green Castle is located in Jasper County
    • Metz
      (4 miles [6.4 km] to the southeast)
      • Jump to our Gazetteer entry for Metz
      • Metz is located in Jasper County
    • Lambs Grove
      (5 miles [8 km] to the east)
      • Jump to our Gazetteer entry for Lambs Grove
      • Lambs Grove is located in Jasper County
      • Population from the 2020 Census: 165 people
    • Mingo
      (5 miles [8 km] to the northwest)
    • Oswalt
      (5 miles [8 km] to the west)
      • Jump to our Gazetteer entry for Oswalt
      • Oswalt is located in Jasper County
    • Valeria
      (6 miles [9.7 km] to the west)
      • Note: The GPS coordinates that we are using for Valeria have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Valeria
      • Valeria is located in Jasper County
      • Population from the 2020 Census: 58 people
    • Baxter
      (7 miles [11.3 km] to the north)
    • Newton
      (8 miles [12.9 km] to the east)
    • Prairie City
      (8 miles [12.9 km] to the south)
    • Clyde
      (9 miles [14.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Clyde have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clyde
      • Clyde is located in Jasper County
  • Mahaska County
    • The following are listed by their distance from Goddard, with the one closest to Goddard listed first.
    • Peoria
      (26 miles [41.8 km] to the southeast)
      • Jump to our Gazetteer entry for Peoria
      • Peoria is located in Mahaska County
    • Taintor
      (27 miles [43.5 km] to the southeast)
      • Jump to our Gazetteer entry for Taintor
      • Taintor is located in Mahaska County
  • Marion County
    • The following are listed by their distance from Goddard, with the one closest to Goddard listed first.
    • Swan
      (18 miles [29 km] to the south)
      • Jump to our Gazetteer entry for Swan
      • Swan is located in Marion County
      • Population from the 2020 Census: 74 people
    • Otley
      (19 miles [30.6 km] to the southeast)
    • Pleasantville
      (23 miles [37 km] to the south)
    • Pella
      (25 miles [40.2 km] to the southeast)
      • Jump to our Gazetteer entry for Pella
      • Pella is located in Marion County
      • Population from the 2020 Census: 10,266 people
      • Jump to TripAdvisor's Tourism page for Pella <1>
    • Knoxville
      (27 miles [43.5 km] to the south)
    • Harvey
      (30 miles [48.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Harvey have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harvey
      • Harvey is located in Marion County
      • Population from the 2020 Census: 243 people
  • Marshall County
    • The following are listed by their distance from Goddard, with the one closest to Goddard listed first.
    • Rhodes
      (14 miles [22.5 km] to the north)
      • Note: The GPS coordinates that we are using for Rhodes have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rhodes
      • Rhodes is located in Marshall County
      • Population from the 2020 Census: 298 people
    • Melbourne
      (16 miles [25.7 km] to the north)
    • Laurel
      (18 miles [29 km] to the northeast)
      • Note: The GPS coordinates that we are using for Laurel have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Laurel
      • Laurel is located in Marshall County
      • Population from the 2020 Census: 234 people
    • Haverhill
      (19 miles [30.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Haverhill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Haverhill
      • Haverhill is located in Marshall County
      • Population from the 2020 Census: 168 people
      • Jump to TripAdvisor's Tourism page for Haverhill <1>
    • State Center
      (20 miles [32.2 km] to the north)
      • Note: The GPS coordinates that we are using for State Center have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for State Center
      • State Center is located in Marshall County
      • Population from the 2020 Census: 1,432 people
      • Jump to TripAdvisor's Tourism page for State Center <1>
    • Ferguson
      (22 miles [35.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Ferguson have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ferguson
      • Ferguson is located in Marshall County
      • Population from the 2020 Census: 122 people
    • LaMoille
      (23 miles [37 km] to the north)
      • Jump to our Gazetteer entry for LaMoille
      • LaMoille is located in Marshall County
    • Gilman
      (23 miles [37 km] to the northeast)
      • Note: The GPS coordinates that we are using for Gilman have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gilman
      • Gilman is located in Marshall County
      • Population from the 2020 Census: 484 people
    • Dillon
      (26 miles [41.8 km] to the northeast)
      • Jump to our Gazetteer entry for Dillon
      • Dillon is located in Marshall County
    • Dunbar
      (26 miles [41.8 km] to the northeast)
      • Jump to our Gazetteer entry for Dunbar
      • Dunbar is located in Marshall County
    • Marshalltown
      (26 miles [41.8 km] to the northeast)
    • Clemons
      (27 miles [43.5 km] to the north)
      • Note: The GPS coordinates that we are using for Clemons have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clemons
      • Clemons is located in Marshall County
      • Population from the 2020 Census: 141 people
  • Polk County
    • The following are listed by their distance from Goddard, with the one closest to Goddard listed first.
    • Mitchellville
      (9 miles [14.5 km] to the west)
      • Note: The GPS coordinates that we are using for Mitchellville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mitchellville
      • Mitchellville is located in Polk County
      • Population from the 2020 Census: 2,273 people
      • Jump to TripAdvisor's Tourism page for Mitchellville <1>
    • Bondurant
      (13 miles [20.9 km] to the west)
      • Note: The GPS coordinates that we are using for Bondurant have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bondurant
      • Bondurant is located in Polk County
      • Population from the 2020 Census: 7,293 people
      • Jump to TripAdvisor's Tourism page for Bondurant <1>
    • Loring
      (14 miles [22.5 km] to the northwest)
      • Jump to our Gazetteer entry for Loring
      • Loring is located in Polk County
    • Altoona
      (15 miles [24.1 km] to the west)
      • Note: The GPS coordinates that we are using for Altoona have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Altoona
      • Altoona is located in Polk County
      • Population from the 2020 Census: 19,503 people
      • Jump to TripAdvisor's Tourism page for Altoona <1>
    • Runnells
      (16 miles [25.7 km] to the southwest)
    • Adelphi
      (17 miles [27.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Adelphi have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Adelphi
      • Adelphi is located in Polk County
    • Rising Sun
      (17 miles [27.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Rising Sun have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rising Sun
      • Rising Sun is located in Polk County
    • Elkhart
      (17 miles [27.4 km] to the west)
    • Pleasant Hill
      (18 miles [29 km] to the southwest)
      • Note: The GPS coordinates that we are using for Pleasant Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pleasant Hill
      • Pleasant Hill is located in Polk County
      • Population from the 2020 Census: 10,025 people
      • Jump to TripAdvisor's Tourism page for Pleasant Hill <1>
    • Berwick
      (18 miles [29 km] to the west)
      • Note: The GPS coordinates that we are using for Berwick have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Berwick
      • Berwick is located in Polk County
    • Country Estate Village
      (19 miles [30.6 km] to the west)
      • Note: The GPS coordinates that we are using for Country Estate Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Country Estate Village
      • Country Estate Village is located in Polk County
    • Ankeny
      (20 miles [32.2 km] to the west)
      • Note: The GPS coordinates that we are using for Ankeny have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ankeny
      • Ankeny is located in Polk County
      • Population from the 2020 Census: 70,068 people
      • Jump to TripAdvisor's Tourism page for Ankeny <1>
  • Poweshiek County
    • The following are listed by their distance from Goddard, with the one closest to Goddard listed first.
    • Grinnell
      (24 miles [38.6 km] to the east)
    • Searsboro
      (26 miles [41.8 km] to the east)
      • Jump to our Gazetteer entry for Searsboro
      • Searsboro is located in Poweshiek County
      • Population from the 2020 Census: 145 people
  • Story County
    • The following are listed by their distance from Goddard, with the one closest to Goddard listed first.
    • Collins
      (14 miles [22.5 km] to the northwest)
      • Jump to our Gazetteer entry for Collins
      • Collins is located in Story County
      • Population from the 2020 Census: 472 people
    • Maxwell
      (15 miles [24.1 km] to the northwest)
    • Iowa Center
      (18 miles [29 km] to the northwest)
      • Jump to our Gazetteer entry for Iowa Center
      • Iowa Center is located in Story County
    • Colo
      (21 miles [33.8 km] to the north)
    • Cambridge
      (21 miles [33.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Cambridge have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cambridge
      • Cambridge is located in Story County
      • Population from the 2020 Census: 796 people
      • Jump to TripAdvisor's Tourism page for Cambridge <1>
    • Huxley
      (24 miles [38.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Huxley have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Huxley
      • Huxley is located in Story County
      • Population from the 2020 Census: 4,270 people
      • Jump to TripAdvisor's Tourism page for Huxley <1>
    • Nevada
      (24 miles [38.6 km] to the northwest)
    • Shipley
      (24 miles [38.6 km] to the northwest)
      • Jump to our Gazetteer entry for Shipley
      • Shipley is located in Story County
    • Midvale
      (25 miles [40.2 km] to the northwest)
      • Jump to our Gazetteer entry for Midvale
      • Midvale is located in Story County
    • Fernald
      (26 miles [41.8 km] to the northwest)
      • Jump to our Gazetteer entry for Fernald
      • Fernald is located in Story County
    • Slater
      (27 miles [43.5 km] to the northwest)
    • Kelley
      (29 miles [46.7 km] to the northwest)
  • Tama County
    • Montour
      (30 miles [48.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Montour have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Montour
      • Montour is located in Tama County
      • Population from the 2020 Census: 242 people
      • Jump to TripAdvisor's Tourism page for Montour <1>
  • Warren County
    • The following are listed by their distance from Goddard, with the one closest to Goddard listed first.
    • Hartford
      (20 miles [32.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Hartford have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hartford
      • Hartford is located in Warren County
      • Population from the 2020 Census: 780 people
      • Jump to TripAdvisor's Tourism page for Hartford <1>
    • Palmyra
      (23 miles [37 km] to the southwest)
      • Jump to our Gazetteer entry for Palmyra
      • Palmyra is located in Warren County
    • Sandyville
      (25 miles [40.2 km] to the south)
      • Jump to our Gazetteer entry for Sandyville
      • Sandyville is located in Warren County
      • Population from the 2020 Census: 54 people
    • Ackworth
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Ackworth have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ackworth
      • Ackworth is located in Warren County
      • Population from the 2020 Census: 105 people
    • Lakewood
      (29 miles [46.7 km] to the southwest)
      • Jump to our Gazetteer entry for Lakewood
      • Lakewood is located in Warren County
    • Indianola
      (30 miles [48.3 km] to the southwest)

For an expanded list of the communities that are closest to Goddard, see our County-by-County Page for Goddard.

Newspapers Published in Goddard ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 73 newspapers that have been published in the area around Goddard.

Although we're unaware of any newspapers that were published in the immediate area of Goddard, there are papers which were published within 28 miles [45.1 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Goddard.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Goddard:

Cemeteries Near Goddard ...

Below are cemeteries that are in the vicinity of Goddard.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Goddard covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Goddard, with the one closest to Goddard listed first.

  • Slaughter Cemetery
    (2 miles [3.2 km] to the south)
    • Note: The GPS coordinates that we are using for the Slaughter Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Slaughter Cemetery
  • Rorabaugh Cemetery
    (3 miles [4.8 km] to the south)
    • Note: The GPS coordinates that we are using for the Rorabaugh Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Rorabaugh Cemetery
  • Sugar Grove Cemetery
    (3 miles [4.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Sugar Grove Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Sugar Grove Cemetery
  • Fisher Cemetery
    (3 miles [4.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Fisher Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Fisher Cemetery
  • McKeever Cemetery
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for the McKeever Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the McKeever Cemetery
  • Shipp Cemetery
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for the Shipp Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Shipp Cemetery
  • Colfax Cemetery
    (4 miles [6.4 km] to the southwest)
  • Highland Cemetery
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Highland Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Highland Cemetery
  • Kelley Family Burial Ground
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for the Kelley Family Burial Ground have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Kelley Family Burial Ground
  • Moffitt Family Cemetery
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for the Moffitt Family Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Moffitt Family Cemetery
  • Greencastle Cemetery
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Greencastle Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Greencastle Cemetery
  • Union Chapel Cemetery
    (5 miles [8 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Union Chapel Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Union Chapel Cemetery
  • Continue List   (298 more) ...
    • Sacred Heart Cemetery
      (5 miles [8 km] to the east)
      • Note: The GPS coordinates that we are using for the Sacred Heart Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Sacred Heart Cemetery
    • Linder Cemetery
      (5 miles [8 km] to the northeast)
      • Note: The GPS coordinates that we are using for the Linder Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Linder Cemetery
    • Independence Cemetery
      (5 miles [8 km] to the northeast)
      • Note: The GPS coordinates that we are using for the Independence Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Independence Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

While we didn't find Goddard in the Atlas, the following 1895 communities would have been found near the current location of Goddard.

These communities are listed based on their distance from Goddard, with the one closest to Goddard listed first.

  • Colfax
    (3 miles [4.8 km] to the southwest)
  • Metz
    (4 miles [6.4 km] to the southeast)
    • Jump to our Gazetteer entry for Metz
    • Metz is located in Jasper County
  • Green Castle
    (4 miles [6.4 km] to the northwest)
    • Jump to our Gazetteer entry for Green Castle
    • Green Castle is located in Jasper County
  • Ira
    (4 miles [6.4 km] to the north)
    • Jump to our Gazetteer entry for Ira
    • Ira is located in Jasper County
  • Oswalt
    (5 miles [8 km] to the west)
    • Jump to our Gazetteer entry for Oswalt
    • Oswalt is located in Jasper County
  • Mingo
    (5 miles [8 km] to the northwest)
  • Valeria
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for Valeria have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Valeria
    • Valeria is located in Jasper County
    • Population from the 2020 Census: 58 people
  • Coal Siding ‑ Historic
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Coal Siding have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Coal Siding
    • Coal Siding is located in Jasper County
  • Baxter
    (7 miles [11.3 km] to the north)
  • Prairie City
    (8 miles [12.9 km] to the south)
  • Newton
    (8 miles [12.9 km] to the east)
  • Mitchellville
    (9 miles [14.5 km] to the west)
    • Note: The GPS coordinates that we are using for Mitchellville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mitchellville
    • Mitchellville is located in Polk County
    • Population from the 2020 Census: 2,273 people
    • Jump to TripAdvisor's Tourism page for Mitchellville <1>
  • Continue List   (13 more) ...
    • Clyde
      (9 miles [14.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Clyde have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clyde
      • Clyde is located in Jasper County
    • Santiago
      (9 miles [14.5 km] to the west)
      • Note: The GPS coordinates that we are using for Santiago have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Santiago
      • Santiago is located in Polk County
    • Reasnor
      (12 miles [19.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Reasnor have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Reasnor
      • Reasnor is located in Jasper County
      • Population from the 2020 Census: 156 people

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Goddard. See our List of 1890's Communities around Goddard.

Unfortunately, we don't know of a website for Goddard. If you can help, please contact us through our Feedback Page.

The official website for State of Iowa: https://www.iowa.gov/

Footnotes ...

<1>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Goddard) to Point B.Our distance measurements begin at a specific point in Goddard. The point we use is located at these GPS coordinates - Latitude: 41.7174, Longitude: -93.1932    
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Goddard, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024