|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Osage Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Osage Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Osage Cemetery (FG ID #668064). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Osage Cemetery. We've listed the following communities based on their distance, with the closest first.
- Osage
(Less than 2 miles to the southeast)
- Mitchell
(3 miles [4.8 km] to the northwest)
- Orchard
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Orchard have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Orchard
- Orchard is located in Mitchell County
- Population from the 2020 Census: 71 people
- Rock Creek
(6 miles [9.7 km] to the southwest)
- Little Cedar
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Little Cedar have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little Cedar
- Little Cedar is located in Mitchell County
- Saint Ansgar
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Saint Ansgar have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Ansgar
- Saint Ansgar is located in Mitchell County
- Population from the 2020 Census: 1,125 people
- Jump to TripAdvisor's Tourism page for Saint Ansgar <3>
- New Haven
(9 miles [14.5 km] to the east)
- Toeterville
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Toeterville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Toeterville
- Toeterville is located in Mitchell County
- Jump to TripAdvisor's Tourism page for Toeterville <3>
- Stacyville
(10 miles [16.1 km] to the north)
- Rudd
(12 miles [19.3 km] to the south)
- Floyd
(12 miles [19.3 km] to the south)
- Carpenter
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Carpenter have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carpenter
- Carpenter is located in Mitchell County
- Population from the 2020 Census: 108 people
- Grafton
(12 miles [19.3 km] to the west)
- Nora Springs
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Nora Springs have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nora Springs
- Nora Springs is located in Floyd County
- Population from the 2020 Census: 1,342 people
- Jump to TripAdvisor's Tourism page for Nora Springs <3>
- Meyer
(13 miles [20.9 km] to the northeast)
- Rock Falls
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Rock Falls have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rock Falls
- Rock Falls is located in Cerro Gordo County
- Population from the 2020 Census: 146 people
- Colwell
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Colwell have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Colwell
- Colwell is located in Floyd County
- Population from the 2020 Census: 67 people
- Jump to TripAdvisor's Tourism page for Colwell <3>
- Riceville
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Riceville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riceville
- Riceville is located in Howard County
- Population from the 2020 Census: 762 people
- Jump to TripAdvisor's Tourism page for Riceville <3>
- Johnsburg
(14 miles [22.5 km] to the north)
- Plymouth
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Plymouth have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plymouth
- Plymouth is located in Cerro Gordo County
- Population from the 2020 Census: 361 people
- Lyle
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Lyle have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lyle
- Lyle is located in Mower County (MN)
- Population from the 2020 Census: 553 people
- Jump to TripAdvisor's Tourism page for Lyle <3>
- McIntire
(15 miles [24.1 km] to the northeast)
- Bolan
(15 miles [24.1 km] to the west)
- Plymouth Junction
(16 miles [25.7 km] to the west)
- Rockford
(17 miles [27.4 km] to the south)
- Charles City
(17 miles [27.4 km] to the southeast)
Off-the-Road Links ...
The official website for State of Iowa: https://www.iowa.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Osage Cemetery. The point we use is located at these GPS coordinates - Latitude: 43.2924, Longitude: -92.8214 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<5> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|