RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Iowa >> Lyon County >> Hillside Cemetery >> Nearby CommunitiesIndex...

Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Hillside Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Hillside Cemetery.

List of Neighboring Communities ...

    Below are the communities that are within 30 miles [48.3 km]<1> of the Hillside Cemetery. We've listed the following communities based on their distance, with the closest first:

  • Lester
    (Less than 2 miles to the south)
    • Lester is located in Lyon County
    • Jump to our Gazetteer entry for Lester
    • Population from the 2020 Census: 303 people
  • Hills
    (5 miles [8 km] to the north)
    • Hills is located in Rock County (MN)
    • Jump to our Gazetteer entry for Hills
    • Population from the 2020 Census: 647 people
    • Jump to TripAdvisor's Tourism page for Hills <2>
  • Steen
    (5 miles [8 km] to the northeast)
    • Steen is located in Rock County (MN)
    • Jump to our Gazetteer entry for Steen
    • Population from the 2020 Census: 164 people
  • Bruce
    (5 miles [8 km] to the northwest)
    • Bruce is located in Rock County (MN)
    • Jump to our Gazetteer entry for Bruce
  • Larchwood
    (5 miles [8 km] to the west)
  • Alvord
    (7 miles [11.3 km] to the south)
  • Rock Rapids
    (8 miles [12.9 km] to the east)
  • Ash Creek
    (9 miles [14.5 km] to the northeast)
    • Ash Creek is located in Rock County (MN)
    • Jump to our Gazetteer entry for Ash Creek
  • Klondike
    (10 miles [16.1 km] to the southwest)
    • Klondike is located in Lyon County
    • Jump to our Gazetteer entry for Klondike
  • Manley
    (10 miles [16.1 km] to the northwest)
    • Manley is located in Rock County (MN)
    • Jump to our Gazetteer entry for Manley
  • Inwood
    (11 miles [17.7 km] to the southwest)
  • Valley Springs
    (11 miles [17.7 km] to the northwest)
  • Beaver Creek
    (11 miles [17.7 km] to the north)
    • Beaver Creek is located in Rock County (MN)
    • Jump to our Gazetteer entry for Beaver Creek
    • Population from the 2020 Census: 283 people
  • Edna
    (12 miles [19.3 km] to the east)
    • Edna is located in Lyon County
    • Jump to our Gazetteer entry for Edna
  • Rowena
    (12 miles [19.3 km] to the west)
  • Doon
    (13 miles [20.9 km] to the southeast)
  • Kanaranzi
    (14 miles [22.5 km] to the northeast)
  • Luverne
    (14 miles [22.5 km] to the north)
  • Brandon
    (15 miles [24.1 km] to the northwest)
    • Brandon is located in Minnehaha County (SD)
    • Jump to our Gazetteer entry for Brandon
    • Population from the 2020 Census: 10,168 people
    • Jump to TripAdvisor's Tourism page for Brandon <2>
  • Shindler
    (15 miles [24.1 km] to the west)
    • Shindler is located in Lincoln County (SD)
    • Jump to our Gazetteer entry for Shindler
    • Population from the 2010 Census: 584 people
  • Canton
    (16 miles [25.7 km] to the southwest)
    • Canton is located in Lincoln County (SD)
    • Jump to our Gazetteer entry for Canton
    • Population from the 2020 Census: 3,583 people
    • Jump to TripAdvisor's Tourism page for Canton <2>
  • Ellsworth
    (16 miles [25.7 km] to the east)
  • Beloit
    (17 miles [27.4 km] to the southwest)
    • Beloit is located in Lyon County
    • Jump to our Gazetteer entry for Beloit
  • Fairview
    (17 miles [27.4 km] to the southwest)
  • Rock Valley
    (17 miles [27.4 km] to the south)

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Hillside Cemetery) to Point B. In other words: 'As the crow flies'.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.