|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Brandon Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Brandon Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Brandon Cemetery. We've listed the following communities based on their distance, with the closest first.
- Iconium
(2 miles [3.2 km] to the southeast)
- Jump to our Gazetteer entry for Iconium
- Iconium is located in Appanoose County
- Melrose
(5 miles [8 km] to the northwest)
- Georgetown
(6 miles [9.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Georgetown. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Georgetown
- Georgetown is located in Monroe County
- Walnut City
(7 miles [11.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Walnut City. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Walnut City
- Walnut City is located in Appanoose County
- Confidence
(8 miles [12.9 km] to the southwest)
- Jump to our Gazetteer entry for Confidence
- Confidence is located in Wayne County
- Darbyville
(8 miles [12.9 km] to the southeast)
- Jump to our Gazetteer entry for Darbyville
- Darbyville is located in Appanoose County
- Moravia
(8 miles [12.9 km] to the east)
- Zero
(8 miles [12.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Zero. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Zero
- Zero is located in Lucas County
- Mystic
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Mystic have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mystic
- Mystic is located in Appanoose County
- Population from the 2020 Census: 410 people
- Clarkdale
(9 miles [14.5 km] to the southeast)
- Jump to our Gazetteer entry for Clarkdale
- Clarkdale is located in Appanoose County
- Rathbun
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Rathbun have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rathbun
- Rathbun is located in Appanoose County
- Population from the 2020 Census: 72 people
- Brazil
(10 miles [16.1 km] to the south)
- Jump to our Gazetteer entry for Brazil
- Brazil is located in Appanoose County
- Plano
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Plano have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plano
- Plano is located in Appanoose County
- Population from the 2020 Census: 67 people
- Jump to TripAdvisor's Tourism page for Plano <2>
- Albia
(11 miles [17.7 km] to the northeast)
- Sunshine
(12 miles [19.3 km] to the south)
- Jump to our Gazetteer entry for Sunshine
- Sunshine is located in Appanoose County
- Russell
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Russell have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Russell
- Russell is located in Lucas County
- Population from the 2020 Census: 531 people
- Jump to TripAdvisor's Tourism page for Russell <2>
- Jerome
(13 miles [20.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Jerome. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Jerome
- Jerome is located in Appanoose County
- Centerville
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Centerville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Centerville
- Centerville is located in Appanoose County
- Population from the 2020 Census: 5,414 people
- Jump to TripAdvisor's Tourism page for Centerville <2>
- Promise City
(14 miles [22.5 km] to the southwest)
- Jump to our Gazetteer entry for Promise City
- Promise City is located in Wayne County
- Population from the 2020 Census: 110 people
- Numa
(15 miles [24.1 km] to the south)
- Jump to our Gazetteer entry for Numa
- Numa is located in Appanoose County
- Population from the 2020 Census: 89 people
- Udell
(15 miles [24.1 km] to the southeast)
- Jump to our Gazetteer entry for Udell
- Udell is located in Appanoose County
- Population from the 2020 Census: 44 people
- Lovilia
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Lovilia have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lovilia
- Lovilia is located in Monroe County
- Population from the 2020 Census: 516 people
- Jump to TripAdvisor's Tourism page for Lovilia <2>
- Unionville
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Unionville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Unionville
- Unionville is located in Appanoose County
- Population from the 2020 Census: 95 people
- Jump to TripAdvisor's Tourism page for Unionville <2>
- Millerton
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Millerton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millerton
- Millerton is located in Wayne County
- Population from the 2020 Census: 42 people
- Seymour
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Seymour have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Seymour
- Seymour is located in Wayne County
- Population from the 2020 Census: 699 people
- Jump to TripAdvisor's Tourism page for Seymour <2>
- Avery
(17 miles [27.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Avery. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Avery
- Avery is located in Monroe County
- Bluff Creek
(17 miles [27.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Bluff Creek. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bluff Creek
- Bluff Creek is located in Monroe County
- Hamilton
(17 miles [27.4 km] to the north)
- Jump to our Gazetteer entry for Hamilton
- Hamilton is located in Marion County
- Population from the 2020 Census: 135 people
Off-the-Road Links ...
The official website for State of Iowa: https://www.iowa.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Brandon Cemetery. The point we use is located at these GPS coordinates - Latitude: 40.9164, Longitude: -92.9819 In this case, the coordinates for the Brandon Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|