RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Georgia >> Telfair County >> Workmore >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
Georgia

The Commemorative Quarter for Georgia





Nearest Communities to Workmore,
Listed County-By-County

The purpose of this page is to identify those communities that are closest to Workmore, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Workmore:

We have great-grandparents who lived in a small community in the northeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.

Keep in mind that when we give a distance, it's a 'straight-line' distance starting from Workmore.<1>

If you're researching your genealogy, we hope that the following information helps.

Workmore is located in Telfair County.

The following 6 counties adjoin and form the boundaries of Telfair County: Ben Hill, Coffee, Dodge, Jeff Davis, Wheeler & Wilcox.

Our Gazetteer shows that there are 124 communities within 40 miles [64.4 km]<1> of Workmore. Of these communities, 110 are located in counties other than Telfair County.

We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.

After starting with the home county for Workmore (which is Telfair County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Workmore

For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.

  • Telfair County   (where Workmore resides)
    • County Seat for Telfair:   McRae - Helena
    • Genealogy Websites   ...
    • Nearest Communities to Workmore   ...
      • These communities are listed by their distance from Workmore.
      • Cobbville
        (2 miles [3.2 km] to the southwest)
        • Note: The GPS coordinates that we are using for Cobbville have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Cobbville
        • Cobbville is located in Telfair County
      • Cedarpark
        (6 miles [9.7 km] to the northeast)
        • Note: The GPS coordinates that we are using for Cedarpark have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Cedarpark
        • Cedarpark is located in Telfair County
      • Jacksonville
        (8 miles [12.9 km] to the south)
      • Helena
        (9 miles [14.5 km] to the north)
      • McRae - Helena
        (9 miles [14.5 km] to the north)
      • McRae
        (9 miles [14.5 km] to the north)
        • Jump to our Gazetteer entry for McRae
        • McRae is located in Telfair County
      • Milan
        (9 miles [14.5 km] to the northwest)
        • Note: The GPS coordinates that we are using for Milan have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Milan
        • Milan is located in Telfair County
        • Population from the 2020 Census: 649 people
        • Jump to TripAdvisor's Tourism page for Milan <4>
      • Scotland
        (10 miles [16.1 km] to the northeast)
        • Note: The GPS coordinates that we are using for Scotland have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Scotland
        • Scotland is located in Telfair County
        • Population from the 2020 Census: 334 people
        • Jump to TripAdvisor's Tourism page for Scotland <4>
      • China Hill
        (10 miles [16.1 km] to the southwest)
        • Note: The GPS coordinates that we are using for China Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for China Hill
        • China Hill is located in Telfair County
      • Towns
        (11 miles [17.7 km] to the northeast)
        • Note: The GPS coordinates that we are using for Towns have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Towns
        • Towns is located in Telfair County
      • Lampkins Old Field Ferry
        (11 miles [17.7 km] to the southwest)
        • Note: The GPS coordinates that we are using for Lampkins Old Field Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lampkins Old Field Ferry
        • Lampkins Old Field Ferry is located in Telfair County
      • Sharon
        (12 miles [19.3 km] to the west)
        • Note: The GPS coordinates that we are using for Sharon have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Sharon
        • Sharon is located in Telfair County
      • Temperance
        (12 miles [19.3 km] to the west)
        • Note: The GPS coordinates that we are using for Temperance have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Temperance
        • Temperance is located in Telfair County
      • Lumber City
        (15 miles [24.1 km] to the east)
        • Note: The GPS coordinates that we are using for Lumber City have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lumber City
        • Lumber City is located in Telfair County
        • Population from the 2020 Census: 1,251 people
        • Jump to TripAdvisor's Tourism page for Lumber City <4>
  • Appling County
    • County Website:   www.baxley.org/site/
    • County Seat for Appling:   Baxley
    • Genealogy Websites   ...
    • Nearest Communities to Workmore   ...
      • These communities are listed by their distance from Workmore.
      • Johnsonville ‑ Historic
        (25 miles [40.2 km] to the east)
        • Note: The GPS coordinates that we are using for Johnsonville have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Johnsonville
        • Johnsonville is located in Appling County
      • Graham
        (26 miles [41.8 km] to the east)
        • Note: The GPS coordinates that we are using for Graham have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Graham
        • Graham is located in Appling County
        • Population from the 2020 Census: 289 people
      • Pine Grove
        (30 miles [48.3 km] to the east)
        • Note: The GPS coordinates that we are using for Pine Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Pine Grove
        • Pine Grove is located in Appling County
  • Ben Hill County
    • County Website:   www.benhillcounty.com/
    • County Seat for Ben Hill:   Fitzgerald
    • Genealogy Websites   ...
    • Nearest Communities to Workmore   ...
      • These communities are listed by their distance from Workmore.
      • Red Bluff
        (11 miles [17.7 km] to the south)
        • Note: The GPS coordinates that we are using for Red Bluff have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Red Bluff
        • Red Bluff is located in Ben Hill County
      • Bowens Mill
        (17 miles [27.4 km] to the west)
        • Note: The GPS coordinates that we are using for Bowens Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Bowens Mill
        • Bowens Mill is located in Ben Hill County
      • Queensland
        (19 miles [30.6 km] to the southwest)
        • Note: The GPS coordinates that we are using for Queensland have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Queensland
        • Queensland is located in Ben Hill County
      • Ashton
        (20 miles [32.2 km] to the southwest)
        • Note: The GPS coordinates that we are using for Ashton have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Ashton
        • Ashton is located in Ben Hill County
      • Lulaville
        (20 miles [32.2 km] to the southwest)
        • Note: The GPS coordinates that we are using for Lulaville have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lulaville
        • Lulaville is located in Ben Hill County
      • Fitzgerald
        (23 miles [37 km] to the southwest)
      • Westwood
        (24 miles [38.6 km] to the southwest)
        • Note: The GPS coordinates that we are using for Westwood have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Westwood
        • Westwood is located in Ben Hill County
      • Abba
        (28 miles [45.1 km] to the southwest)
        • Jump to our Gazetteer entry for Abba
        • Abba is located in Ben Hill County
  • Coffee County
    • County Seat for Coffee:   Douglas
    • Genealogy Websites   ...
    • Nearest Communities to Workmore   ...
      • These communities are listed by their distance from Workmore.
      • Relee
        (12 miles [19.3 km] to the south)
        • Note: The GPS coordinates that we are using for Relee have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Relee
        • Relee is located in Coffee County
      • Sapps Still
        (15 miles [24.1 km] to the south)
        • Note: The GPS coordinates that we are using for Sapps Still have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Sapps Still
        • Sapps Still is located in Coffee County
      • Pridgen
        (16 miles [25.7 km] to the south)
        • Note: The GPS coordinates that we are using for Pridgen have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Pridgen
        • Pridgen is located in Coffee County
      • Broxton
        (21 miles [33.8 km] to the south)
      • Lehigh
        (22 miles [35.4 km] to the southeast)
        • Note: The GPS coordinates that we are using for Lehigh have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lehigh
        • Lehigh is located in Coffee County
      • Ambrose
        (23 miles [37 km] to the south)
      • Lotts
        (24 miles [38.6 km] to the south)
        • Note: The GPS coordinates that we are using for Lotts have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lotts
        • Lotts is located in Coffee County
      • Bushnell
        (25 miles [40.2 km] to the south)
        • Note: The GPS coordinates that we are using for Bushnell have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Bushnell
        • Bushnell is located in Coffee County
      • West Green
        (25 miles [40.2 km] to the southeast)
        • Note: The GPS coordinates that we are using for West Green have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for West Green
        • West Green is located in Coffee County
        • Jump to TripAdvisor's Tourism page for West Green <4>
      • Continue List   (6 more) ...
        • Blystonel
          (27 miles [43.5 km] to the south)
          • Note: The GPS coordinates that we are using for Blystonel have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Blystonel
          • Blystonel is located in Coffee County
        • Huffer
          (27 miles [43.5 km] to the south)
          • Note: The GPS coordinates that we are using for Huffer have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Huffer
          • Huffer is located in Coffee County
        • Cherokee Hills
          (28 miles [45.1 km] to the south)
          • Note: The GPS coordinates that we are using for Cherokee Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Cherokee Hills
          • Cherokee Hills is located in Coffee County
        • Upton
          (28 miles [45.1 km] to the south)
          • Note: The GPS coordinates that we are using for Upton have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Upton
          • Upton is located in Coffee County
        • Douglas
          (29 miles [46.7 km] to the south)
        • Oak Park
          (29 miles [46.7 km] to the south)
          • Note: The GPS coordinates that we are using for Oak Park have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Oak Park
          • Oak Park is located in Coffee County
          • Estimated population in 2019: 470 people
  • Dodge County
    • County Seat for Dodge:   Eastman
    • Genealogy Websites   ...
    • Nearest Communities to Workmore   ...
      • These communities are listed by their distance from Workmore.
      • Poplar Hill
        (10 miles [16.1 km] to the west)
        • Note: The GPS coordinates that we are using for Poplar Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Poplar Hill
        • Poplar Hill is located in Dodge County
      • Achord
        (11 miles [17.7 km] to the north)
        • Note: The GPS coordinates that we are using for Achord have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Achord
        • Achord is located in Dodge County
      • Calvin
        (12 miles [19.3 km] to the northwest)
        • Note: The GPS coordinates that we are using for Calvin have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Calvin
        • Calvin is located in Dodge County
      • Cox ‑ Historic
        (12 miles [19.3 km] to the northwest)
        • Note: The GPS coordinates that we are using for Cox have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Cox
        • Cox is located in Dodge County
      • McCranie
        (12 miles [19.3 km] to the northwest)
        • Note: The GPS coordinates that we are using for McCranie have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for McCranie
        • McCranie is located in Dodge County
      • Ararat
        (13 miles [20.9 km] to the northwest)
        • Note: The GPS coordinates that we are using for Ararat have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Ararat
        • Ararat is located in Dodge County
      • Chauncey
        (13 miles [20.9 km] to the northwest)
      • Jay Bird Springs
        (14 miles [22.5 km] to the north)
        • Note: The GPS coordinates that we are using for Jay Bird Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Jay Bird Springs
        • Jay Bird Springs is located in Dodge County
      • Sigurd ‑ Historic
        (14 miles [22.5 km] to the north)
        • Note: The GPS coordinates that we are using for Sigurd have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Sigurd
        • Sigurd is located in Dodge County
      • Rhine
        (15 miles [24.1 km] to the west)
        • Note: The GPS coordinates that we are using for Rhine have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Rhine
        • Rhine is located in Dodge County
        • Population from the 2020 Census: 364 people
        • Jump to TripAdvisor's Tourism page for Rhine <4>
      • Pitts
        (16 miles [25.7 km] to the north)
        • Note: The GPS coordinates that we are using for Pitts have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Pitts
        • Pitts is located in Dodge County
      • Five Points
        (17 miles [27.4 km] to the northwest)
        • Note: The GPS coordinates that we are using for Five Points have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Five Points
        • Five Points is located in Dodge County
      • Continue List   (14 more) ...
        • Godwinsville
          (17 miles [27.4 km] to the northwest)
          • Note: The GPS coordinates that we are using for Godwinsville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Godwinsville
          • Godwinsville is located in Dodge County
        • Copeland
          (17 miles [27.4 km] to the west)
          • Note: The GPS coordinates that we are using for Copeland have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Copeland
          • Copeland is located in Dodge County
        • Saunders
          (20 miles [32.2 km] to the north)
          • Note: The GPS coordinates that we are using for Saunders have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Saunders
          • Saunders is located in Dodge County
        • Amoskeag ‑ Historic
          (20 miles [32.2 km] to the northwest)
          • Note: The GPS coordinates that we are using for Amoskeag have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Amoskeag
          • Amoskeag is located in Dodge County
        • Lowery
          (21 miles [33.8 km] to the northwest)
          • Note: The GPS coordinates that we are using for Lowery have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Lowery
          • Lowery is located in Dodge County
        • Union
          (21 miles [33.8 km] to the northwest)
          • Note: The GPS coordinates that we are using for Union have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Union
          • Union is located in Dodge County
        • Eastman
          (22 miles [35.4 km] to the northwest)
        • Mukerson
          (23 miles [37 km] to the north)
          • Note: The GPS coordinates that we are using for Mukerson have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Mukerson
          • Mukerson is located in Dodge County
        • Horne
          (25 miles [40.2 km] to the north)
          • Note: The GPS coordinates that we are using for Horne have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Horne
          • Horne is located in Dodge County
        • Beehive ‑ Historic
          (26 miles [41.8 km] to the northwest)
          • Note: The GPS coordinates that we are using for Beehive have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Beehive
          • Beehive is located in Dodge County
        • Dodge High
          (26 miles [41.8 km] to the northwest)
          • Note: The GPS coordinates that we are using for Dodge High have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Dodge High
          • Dodge High is located in Dodge County
        • Plainfield
          (26 miles [41.8 km] to the northwest)
          • Note: The GPS coordinates that we are using for Plainfield have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Plainfield
          • Plainfield is located in Dodge County
          • Estimated population in 2019: 716 people
          • Jump to TripAdvisor's Tourism page for Plainfield <4>
        • Dempsey
          (27 miles [43.5 km] to the northwest)
          • Note: The GPS coordinates that we are using for Dempsey have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Dempsey
          • Dempsey is located in Dodge County
        • Gresston
          (30 miles [48.3 km] to the northwest)
          • Note: The GPS coordinates that we are using for Gresston have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Gresston
          • Gresston is located in Dodge County
  • Irwin County
    • County Seat for Irwin:   Ocilla
    • Genealogy Websites   ...
    • Nearest Communities to Workmore   ...
      • These communities are listed by their distance from Workmore.
      • Osierfield
        (21 miles [33.8 km] to the southwest)
        • Note: The GPS coordinates that we are using for Osierfield have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Osierfield
        • Osierfield is located in Irwin County
      • Wray
        (22 miles [35.4 km] to the south)
      • Holt
        (26 miles [41.8 km] to the southwest)
        • Note: The GPS coordinates that we are using for Holt have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Holt
        • Holt is located in Irwin County
      • Ocilla
        (29 miles [46.7 km] to the southwest)
        • Note: The GPS coordinates that we are using for Ocilla have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Ocilla
        • Ocilla is located in Irwin County
        • Population from the 2020 Census: 3,722 people
        • Jump to TripAdvisor's Tourism page for Ocilla <4>
      • Arp
        (30 miles [48.3 km] to the southwest)
        • Jump to our Gazetteer entry for Arp
        • Arp is located in Irwin County
      • Lands Crossroads
        (30 miles [48.3 km] to the southwest)
        • Note: The GPS coordinates that we are using for Lands Crossroads have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lands Crossroads
        • Lands Crossroads is located in Irwin County
  • Jeff Davis County
    • County Seat for Jeff Davis:   Hazlehurst
    • Genealogy Websites   ...
    • Nearest Communities to Workmore   ...
      • These communities are listed by their distance from Workmore.
      • Ashleys Ferry
        (10 miles [16.1 km] to the southeast)
        • Note: The GPS coordinates that we are using for Ashleys Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Ashleys Ferry
        • Ashleys Ferry is located in Jeff Davis County
      • Burketts Ferry
        (11 miles [17.7 km] to the east)
        • Note: The GPS coordinates that we are using for Burketts Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Burketts Ferry
        • Burketts Ferry is located in Jeff Davis County
      • Bingham ‑ Historic
        (12 miles [19.3 km] to the southeast)
        • Note: The GPS coordinates that we are using for Bingham have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Bingham
        • Bingham is located in Jeff Davis County
      • Paceville ‑ Historic
        (12 miles [19.3 km] to the southeast)
        • Note: The GPS coordinates that we are using for Paceville have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Paceville
        • Paceville is located in Jeff Davis County
      • Kirkland
        (14 miles [22.5 km] to the southeast)
        • Note: The GPS coordinates that we are using for Kirkland have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Kirkland
        • Kirkland is located in Jeff Davis County
      • Lumber City Ferry
        (15 miles [24.1 km] to the east)
        • Note: The GPS coordinates that we are using for Lumber City Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lumber City Ferry
        • Lumber City Ferry is located in Jeff Davis County
        • Estimated population in 2019: 1,257 people
      • Snipesville
        (16 miles [25.7 km] to the southeast)
        • Note: The GPS coordinates that we are using for Snipesville have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Snipesville
        • Snipesville is located in Jeff Davis County
      • Goldsmith ‑ Historic
        (18 miles [29 km] to the southeast)
        • Note: The GPS coordinates that we are using for Goldsmith have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Goldsmith
        • Goldsmith is located in Jeff Davis County
      • Roper
        (18 miles [29 km] to the southeast)
        • Note: The GPS coordinates that we are using for Roper have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Roper
        • Roper is located in Jeff Davis County
      • Brooker
        (19 miles [30.6 km] to the southeast)
        • Note: The GPS coordinates that we are using for Brooker have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Brooker
        • Brooker is located in Jeff Davis County
      • Hazlehurst
        (20 miles [32.2 km] to the east)
      • Denton
        (20 miles [32.2 km] to the southeast)
      • Continue List   (8 more) ...
        • Tallahassee
          (21 miles [33.8 km] to the east)
          • Note: The GPS coordinates that we are using for Tallahassee have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Tallahassee
          • Tallahassee is located in Jeff Davis County
          • Estimated population in 2019: 3,185 people
        • Ellis ‑ Historic
          (22 miles [35.4 km] to the southeast)
          • Note: The GPS coordinates that we are using for Ellis have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Ellis
          • Ellis is located in Jeff Davis County
        • Maysie ‑ Historic
          (24 miles [38.6 km] to the east)
          • Note: The GPS coordinates that we are using for Maysie have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Maysie
          • Maysie is located in Jeff Davis County
        • Orico ‑ Historic
          (24 miles [38.6 km] to the east)
          • Note: The GPS coordinates that we are using for Orico have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Orico
          • Orico is located in Jeff Davis County
        • Quinn ‑ Historic
          (24 miles [38.6 km] to the southeast)
          • Note: The GPS coordinates that we are using for Quinn have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Quinn
          • Quinn is located in Jeff Davis County
          • Estimated population in 2019: 3,652 people
        • Satilla
          (24 miles [38.6 km] to the southeast)
          • Note: The GPS coordinates that we are using for Satilla have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Satilla
          • Satilla is located in Jeff Davis County
        • Town Bluff Ferry
          (25 miles [40.2 km] to the east)
          • Note: The GPS coordinates that we are using for Town Bluff Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Town Bluff Ferry
          • Town Bluff Ferry is located in Jeff Davis County
        • Manns Ferry
          (28 miles [45.1 km] to the east)
          • Note: The GPS coordinates that we are using for Manns Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Manns Ferry
          • Manns Ferry is located in Jeff Davis County
  • Laurens County
    • County Website:   www.laurenscoga.org
    • County Seat for Laurens:   Dublin
    • Genealogy Websites   ...
    • Nearest Communities to Workmore   ...
      • These communities are listed by their distance from Workmore.
      • Cedar Grove
        (21 miles [33.8 km] to the north)
        • Jump to our Gazetteer entry for Cedar Grove
        • Cedar Grove is located in Laurens County
      • Westbrook ‑ Historic
        (21 miles [33.8 km] to the north)
        • Note: The GPS coordinates that we are using for Westbrook have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Westbrook
        • Westbrook is located in Laurens County
      • Walkee ‑ Historic
        (25 miles [40.2 km] to the north)
        • Note: The GPS coordinates that we are using for Walkee have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Walkee
        • Walkee is located in Laurens County
      • Batson
        (26 miles [41.8 km] to the north)
        • Note: The GPS coordinates that we are using for Batson have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Batson
        • Batson is located in Laurens County
      • Hatoff ‑ Historic
        (27 miles [43.5 km] to the north)
        • Note: The GPS coordinates that we are using for Hatoff have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Hatoff
        • Hatoff is located in Laurens County
      • Cadwell
        (28 miles [45.1 km] to the north)
      • Lowery
        (30 miles [48.3 km] to the north)
        • Note: The GPS coordinates that we are using for Lowery have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lowery
        • Lowery is located in Laurens County
  • Montgomery County
    • County Seat for Montgomery:   Mount Vernon
    • Genealogy Websites   ...
    • Nearest Communities to Workmore   ...
      • These communities are listed by their distance from Workmore.
      • Charlotteville
        (24 miles [38.6 km] to the east)
        • Note: The GPS coordinates that we are using for Charlotteville have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Charlotteville
        • Charlotteville is located in Montgomery County
      • Uvalda
        (26 miles [41.8 km] to the east)
      • Mount Vernon
        (26 miles [41.8 km] to the northeast)
      • Ailey
        (27 miles [43.5 km] to the northeast)
        • Jump to our Gazetteer entry for Ailey
        • Ailey is located in Montgomery County
        • Population from the 2020 Census: 528 people
        • Jump to TripAdvisor's Tourism page for Ailey <4>
      • Oak Grove
        (27 miles [43.5 km] to the northeast)
        • Note: The GPS coordinates that we are using for Oak Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Oak Grove
        • Oak Grove is located in Montgomery County
      • Alston
        (28 miles [45.1 km] to the east)
  • Toombs County
    • County Seat for Toombs:   Lyons
    • Genealogy Websites   ...
    • Nearest Communities to Workmore   ...
      • These communities are listed by their distance from Workmore.
      • McNatt Falls
        (27 miles [43.5 km] to the east)
        • Note: The GPS coordinates that we are using for McNatt Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for McNatt Falls
        • McNatt Falls is located in Toombs County
      • Grays Landing
        (29 miles [46.7 km] to the east)
        • Note: The GPS coordinates that we are using for Grays Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Grays Landing
        • Grays Landing is located in Toombs County
  • Wheeler County
    • County Seat for Wheeler:   Alamo
    • Genealogy Websites   ...
    • Nearest Communities to Workmore   ...
      • These communities are listed by their distance from Workmore.
      • Avants
        (12 miles [19.3 km] to the north)
        • Note: The GPS coordinates that we are using for Avants have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Avants
        • Avants is located in Wheeler County
      • Spring Hill
        (13 miles [20.9 km] to the northeast)
        • Note: The GPS coordinates that we are using for Spring Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Spring Hill
        • Spring Hill is located in Wheeler County
      • Erick
        (14 miles [22.5 km] to the northeast)
        • Note: The GPS coordinates that we are using for Erick have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Erick
        • Erick is located in Wheeler County
      • Alamo
        (17 miles [27.4 km] to the northeast)
        • Jump to our Gazetteer entry for Alamo
        • Alamo is located in Wheeler County
        • Population from the 2020 Census: 3,301 people
        • Jump to TripAdvisor's Tourism page for Alamo <4>
      • Jordan
        (17 miles [27.4 km] to the northeast)
        • Note: The GPS coordinates that we are using for Jordan have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Jordan
        • Jordan is located in Wheeler County
      • Stuckey
        (21 miles [33.8 km] to the northeast)
        • Note: The GPS coordinates that we are using for Stuckey have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Stuckey
        • Stuckey is located in Wheeler County
      • Glenwood
        (23 miles [37 km] to the northeast)
      • Long Pond
        (25 miles [40.2 km] to the northeast)
        • Note: The GPS coordinates that we are using for Long Pond have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Long Pond
        • Long Pond is located in Wheeler County
      • Ochwalkee
        (25 miles [40.2 km] to the northeast)
        • Note: The GPS coordinates that we are using for Ochwalkee have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Ochwalkee
        • Ochwalkee is located in Wheeler County
        • Estimated population in 2019: 3,732 people
  • Wilcox County
    • County Seat for Wilcox:   Abbeville
    • Genealogy Websites   ...
    • Nearest Communities to Workmore   ...
      • These communities are listed by their distance from Workmore.
      • Forest Glen
        (18 miles [29 km] to the west)
        • Note: The GPS coordinates that we are using for Forest Glen have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Forest Glen
        • Forest Glen is located in Wilcox County
      • Browning
        (19 miles [30.6 km] to the west)
        • Note: The GPS coordinates that we are using for Browning have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Browning
        • Browning is located in Wilcox County
      • Statham Shoals
        (20 miles [32.2 km] to the west)
        • Note: The GPS coordinates that we are using for Statham Shoals have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Statham Shoals
        • Statham Shoals is located in Wilcox County
      • Abbeville
        (21 miles [33.8 km] to the west)
      • Sibbie
        (22 miles [35.4 km] to the west)
        • Note: The GPS coordinates that we are using for Sibbie have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Sibbie
        • Sibbie is located in Wilcox County
      • Kramer
        (26 miles [41.8 km] to the west)
        • Note: The GPS coordinates that we are using for Kramer have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Kramer
        • Kramer is located in Wilcox County
      • Owensboro
        (28 miles [45.1 km] to the west)
        • Note: The GPS coordinates that we are using for Owensboro have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Owensboro
        • Owensboro is located in Wilcox County
      • Rochelle
        (30 miles [48.3 km] to the west)
        • Note: The GPS coordinates that we are using for Rochelle have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Rochelle
        • Rochelle is located in Wilcox County
        • Population from the 2020 Census: 1,081 people
        • Jump to TripAdvisor's Tourism page for Rochelle <4>

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Workmore) to Point B.Our distance measurements begin at a specific point in Workmore. The point we use is located at these GPS coordinates - Latitude: 31.9352, Longitude: -82.9393       In this case, the coordinates for Workmore have been provided by the Geographic Names Information System (GNIS).
<2>Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.

We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.

Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024