TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Watkinsville. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Watkinsville.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Watkinsville - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 45 communities listed:
- Arnoldsville
(11 miles [17.7 km] to the east)
- Athens
(6 miles [9.7 km] to the north)
- Auburn
(26 miles [41.8 km] to the northwest)
- Bethlehem
(18 miles [29 km] to the west)
- Bishop
(3 miles [4.8 km] to the southwest)
- Bogart
(9 miles [14.5 km] to the northwest)
- Bostwick
(10 miles [16.1 km] to the southwest)
- Braselton
(26 miles [41.8 km] to the northwest)
- Buckhead
(20 miles [32.2 km] to the south)
- Carlton
(24 miles [38.6 km] to the northeast)
- Colbert
(16 miles [25.7 km] to the northeast)
- Comer
(21 miles [33.8 km] to the northeast)
- Commerce
(24 miles [38.6 km] to the north)
- Crawford
(14 miles [22.5 km] to the east)
- Dacula
(29 miles [46.7 km] to the west)
- Danielsville
(21 miles [33.8 km] to the northeast)
- Farmington
(6 miles [9.7 km] to the south)
- Good Hope
(12 miles [19.3 km] to the southwest)
- Greensboro
(23 miles [37 km] to the southeast)
- High Shoals
(6 miles [9.7 km] to the southwest)
- Hoschton
(26 miles [41.8 km] to the northwest)
- Hull
(12 miles [19.3 km] to the northeast)
- Ila
(22 miles [35.4 km] to the north)
- Jefferson
(20 miles [32.2 km] to the northwest)
- Jersey
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Jersey have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jersey
- Jersey is located in Walton County
- Population from the 2020 Census: 147 people
- Jump to TripAdvisor's Tourism page for Jersey <2>
- Lexington
(16 miles [25.7 km] to the east)
- Loganville
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Loganville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loganville
- Loganville is located in Gwinnett County
- Population from the 2020 Census: 13,310 people
- Jump to TripAdvisor's Tourism page for Loganville <2>
- Madison
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Madison have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Madison
- Madison is located in Morgan County
- Population from the 2020 Census: 4,258 people
- Jump to TripAdvisor's Tourism page for Madison <2>
- Mansfield
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Mansfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mansfield
- Mansfield is located in Newton County
- Population from the 2020 Census: 447 people
- Jump to TripAdvisor's Tourism page for Mansfield <2>
- Maxeys
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Maxeys have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maxeys
- Maxeys is located in Oglethorpe County
- Population from the 2020 Census: 227 people
- Jump to TripAdvisor's Tourism page for Maxeys <2>
- Maysville
(28 miles [45.1 km] to the north)
- Monroe
(18 miles [29 km] to the west)
- Newborn
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Newborn have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newborn
- Newborn is located in Newton County
- Population from the 2020 Census: 791 people
- Jump to TripAdvisor's Tourism page for Newborn <2>
- Nicholson
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Nicholson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nicholson
- Nicholson is located in Jackson County
- Population from the 2020 Census: 1,909 people
- Jump to TripAdvisor's Tourism page for Nicholson <2>
- Pendergrass
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Pendergrass have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pendergrass
- Pendergrass is located in Jackson County
- Population from the 2020 Census: 577 people
- Jump to TripAdvisor's Tourism page for Pendergrass <2>
- Rayle
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Rayle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rayle
- Rayle is located in Wilkes County
- Population from the 2020 Census: 188 people
- Jump to TripAdvisor's Tourism page for Rayle <2>
- Rutledge
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Rutledge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rutledge
- Rutledge is located in Morgan County
- Population from the 2020 Census: 831 people
- Jump to TripAdvisor's Tourism page for Rutledge <2>
- Siloam
(29 miles [46.7 km] to the southeast)
- Social Circle
(22 miles [35.4 km] to the southwest)
- Statham
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Statham have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Statham
- Statham is located in Barrow County
- Population from the 2020 Census: 2,880 people
- Jump to TripAdvisor's Tourism page for Statham <2>
- Stephens
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Stephens have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stephens
- Stephens is located in Oglethorpe County
- Former name for Stephens:
- Antioch
- Jump to TripAdvisor's Tourism page for Stephens <2>
- Talmo
(28 miles [45.1 km] to the northwest)
- Union Point
(25 miles [40.2 km] to the southeast)
- Winder
(20 miles [32.2 km] to the northwest)
- Winterville
(10 miles [16.1 km] to the northeast)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Watkinsville. If you can help, please contact us through our Feedback Page.
The official website for Oconee County: www.oconeecounty.com/
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Watkinsville) to Point B.Our distance measurements begin at a specific point in Watkinsville. The point we use is located at these GPS coordinates - Latitude: 33.8612, Longitude: -83.4072 In this case, the coordinates for Watkinsville have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |