RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Georgia >> Whitfield County >> Toonnerville >> Tidbits & TriviaIndex...










Learn About
The Commemorative
Quarter for
Georgia


The Commemorative Quarter for Georgia







Outdoor Activities ...

As we travel, we like to pursue some of our interests (such as astronomy and bird watching).

When in Toonnerville, we use the following websites to find information relevant to Toonnerville and the surrounding area.

  • Weather ...
  • Astronomy & Satellites ...
    • Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
    • To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Toonnerville:
    • 34.868134, -84.887721
    • Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
    • The Heavens-Above Website, centered on Toonnerville
  • Waymarking ...
    • Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
    • Waymark.com

Curious and Interesting Names Near Toonnerville ...

As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.

  • Beaverdale
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Beaverdale have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Beaverdale
    • Beaverdale is located in Whitfield County
  • Cedar Ridge
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Cedar Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cedar Ridge
    • Cedar Ridge is located in Whitfield County
  • Cedar Valley
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for Cedar Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cedar Valley
    • Cedar Valley is located in Whitfield County
  • Dawnville
    (3 miles [4.8 km] to the south)
    • Note: The GPS coordinates that we are using for Dawnville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dawnville
    • Dawnville is located in Whitfield County
  • Edgar ‑ Historic
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for Edgar have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Edgar
    • Edgar is located in Whitfield County
  • Plainview
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Plainview
    • Plainview is located in Whitfield County
    • Estimated population in 2019: 318 people
  • Pleasant Grove
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Pleasant Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pleasant Grove
    • Pleasant Grove is located in Whitfield County
  • Ruralvale
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for Ruralvale have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ruralvale
    • Ruralvale is located in Whitfield County
  • Treadwell
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Treadwell have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Treadwell
    • Treadwell is located in Murray County

How Far From Toonnerville to ...

We spend a lot of time looking through Gazetteers & Almanacs that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Toonnerville to various places of note, such as the White House.

With a nod to our favorite Gazetteers, the straight-line distance<2> beginning in Toonnerville and extending to:

  • Dalton, which is the Seat of Whitfield County, lies just to the South Southwest.
  • Atlanta, which is the State Capital of Georgia, lies 81 miles [130.4 km]<2> to the south southeast (SSE). If you could drive a straight line from Toonnerville to Atlanta, with an average speed<3>of 63 miles [101.4 km] per hour, it would take less than two hours to make the trip. A comfortable walk of 2.2 miles [3.5 km] per hour would take 5 days. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take most of three days.
  • The White House (Washington, DC) is 514 miles [827.2 km] to the northeast (NE). Driving would take just over a day, a buggy would take 20 days and walking would take 30 days.
  • The shortest distance<4> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 6,408 miles [10,312.7 km] and it lies to the northeast (NE).<5>
  • The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 7,117 miles [11,453.7 km] and it lies to the northeast (NE).<6>
  • The distance to Saint Peter's Basilica (The Vatican) is 4,993 miles [8,035.5 km] and it lies to the northeast (NE).<7>

Unfortunately, we don't know of a website for Toonnerville. If you can help, please contact us through our Feedback Page.

The official website for Whitfield County: www.whitfieldcountyga.com/

The official website for State of Georgia: https://georgia.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Toonnerville) to Point B.Our distance measurements begin at a specific point in Toonnerville. The point we use is located at these GPS coordinates - Latitude: 34.8681, Longitude: -84.8877       In this case, the coordinates for Toonnerville have been provided by the Geographic Names Information System (GNIS).
<3>While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day.
<4>The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Toonnerville to the Middle East to be East and South, the Great Circle Route actually lies to the North and East.
<5>The calculated bearing (or angle) to Jerusalem is 312.594 degrees.
<6>The calculated bearing (or angle) to Mecca is 308.227 degrees.
<7>The calculated bearing (or angle) to the Vatican is 309.213 degrees.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024