RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Georgia >> Liberty County >> Strum Bay >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
Georgia

The Commemorative Quarter for Georgia





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Strum Bay in the Atlas, the following communities of the 1890's would have been found near the current location of Strum Bay. The following communities are listed based on their distance, with the one closest to Strum Bay listed first.

  • Taylors Creek ‑ Historic
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Taylors Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Taylors Creek
    • Taylors Creek is located in Liberty County
  • Pembroke
    (8 miles [12.9 km] to the north)
    • Note: The GPS coordinates that we are using for Pembroke have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pembroke
    • Pembroke is located in Bryan County
    • Population from the 2020 Census: 2,683 people
    • Jump to TripAdvisor's Tourism page for Pembroke <3>
  • Flemington
    (11 miles [17.7 km] to the south)
  • Ellabell
    (11 miles [17.7 km] to the northeast)
  • Gum Branch
    (12 miles [19.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Gum Branch have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gum Branch
    • Gum Branch is located in Liberty County
    • Population from the 2020 Census: 269 people
  • Hinesville
    (12 miles [19.3 km] to the south)
  • Statesborough
    (14 miles [22.5 km] to the north)
    • Note: The GPS coordinates that we are using for Statesborough have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Statesborough
    • Statesborough is located in Bulloch County
    • Estimated population in 2019: 32,954 people
  • Birdford ‑ Historic
    (15 miles [24.1 km] to the west)
    • Note: The GPS coordinates that we are using for Birdford have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Birdford
    • Birdford is located in Tattnall County
  • McIntosh
    (15 miles [24.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for McIntosh have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for McIntosh
    • McIntosh is located in Liberty County
  • Fleming
    (15 miles [24.1 km] to the southeast)
  • Walthourville
    (17 miles [27.4 km] to the south)
    • Note: The GPS coordinates that we are using for Walthourville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Walthourville
    • Walthourville is located in Liberty County
    • Population from the 2020 Census: 4,065 people
    • Jump to TripAdvisor's Tourism page for Walthourville <3>
  • Meldrim
    (17 miles [27.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Meldrim have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Meldrim
    • Meldrim is located in Effingham County
    • Jump to TripAdvisor's Tourism page for Meldrim <3>
  • Eden
    (17 miles [27.4 km] to the northeast)
  • Glennville
    (18 miles [29 km] to the west)
  • Dorchester
    (20 miles [32.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Dorchester have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dorchester
    • Dorchester is located in Liberty County
  • Ivanhoe
    (20 miles [32.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Ivanhoe have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ivanhoe
    • Ivanhoe is located in Bulloch County
  • Enal ‑ Historic
    (21 miles [33.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Enal have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Enal
    • Enal is located in Bulloch County
  • Bloomingdale
    (21 miles [33.8 km] to the east)
  • Burroughs
    (22 miles [35.4 km] to the east)
    • Note: The GPS coordinates that we are using for Burroughs have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Burroughs
    • Burroughs is located in Chatham County
  • Marlow
    (22 miles [35.4 km] to the northeast)
    • Jump to our Gazetteer entry for Marlow
    • Marlow is located in Effingham County
  • Arcola
    (22 miles [35.4 km] to the north)
    • Note: The GPS coordinates that we are using for Arcola have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Arcola
    • Arcola is located in Bulloch County
  • Tison
    (23 miles [37 km] to the west)
    • Note: The GPS coordinates that we are using for Tison have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Tison
    • Tison is located in Tattnall County
  • Emit
    (23 miles [37 km] to the north)
    • Note: The GPS coordinates that we are using for Emit have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Emit
    • Emit is located in Bulloch County
  • Riceboro
    (23 miles [37 km] to the southeast)
    • Note: The GPS coordinates that we are using for Riceboro have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Riceboro
    • Riceboro is located in Liberty County
    • Population from the 2020 Census: 765 people
    • Jump to TripAdvisor's Tourism page for Riceboro <3>
  • Pooler
    (23 miles [37 km] to the east)
    • Note: The GPS coordinates that we are using for Pooler have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pooler
    • Pooler is located in Chatham County
    • Population from the 2020 Census: 26,022 people
    • Jump to TripAdvisor's Tourism page for Pooler <3>

Unfortunately, we don't know of an official website for Strum Bay. If you can help, please contact us through our Feedback Page.

The official website for State of Georgia: https://georgia.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Strum Bay, please let us know so that we can improve our accuracy.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024