Welcome to Taylors Creek ...
So far, we found very little information about Taylors Creek. The little that we've found leads us believe that the community is historic.<1>
We've added Taylors Creek to our Gazetteer with the hope that we can develop more information. If you can help us with Taylors Creek, please Contact Us.
Taylors Creek would have been located within present day Liberty County<2>.
The location of Taylors Creek has been provided by the Geographic Names Information System (ie- the GNIS).<3>
While we don't have a date for the founding of Taylors Creek, you might get a feel for it by knowing that during our research the earliest mention that we found (so far) was in a book dated 1895.
A typical abbreviation for Taylors Creek: Taylors Crk. (or less commonly used: Taylors Ck. or Taylors Cr.)
See our Genealogy Helper Page for Taylors Creek for more information about variations on the name of Taylors Creek.
While the community is gone, the present day location for Taylors Creek is 60 feet [18 m] above sea level.<4>.
Time Zone: The area where Taylors Creek was located is in the Eastern Time Zone (EST/EDT) and observes daylight saving time
Taylors Creek would have been located in the (912) area code.
Websites for Taylors Creek ...
Chamber of Commerce: www.libertycounty.org/
Although we don't have any websites that are specific to Taylors Creek, the following might be of interest:
Communities Also Named Taylors Creek ...
Using our Gazetteer, we found that there are 3 communities that are also named Taylors Creek - they are located in Ohio (2) and South Carolina.
For more information, see our Tidbits & Trivia Page for Taylors Creek.
Communities near Taylors Creek ...
We have created a list of 10 communities that are near Taylors Creek.
- Hinesville
(7 miles [11.3 km] to the southeast)- Jump to our Gazetteer entry for Hinesville
- Hinesville is located in Liberty County
- Population from the 2020 Census: 34,085 people
- Jump to TripAdvisor's Tourism page for Hinesville <5>
- Garden Acres
(7 miles [11.3 km] to the southeast)- Note: The GPS coordinates that we are using for Garden Acres have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Garden Acres
- Garden Acres is located in Liberty County
- Estimated population in 2019: 8,713 people
- Glennville
(16 miles [25.7 km] to the west)- Jump to our Gazetteer entry for Glennville
- Glennville is located in Tattnall County
- Population from the 2020 Census: 5,014 people
- Jump to TripAdvisor's Tourism page for Glennville <5>
- Walthourville
(11 miles [17.7 km] to the south)- Note: The GPS coordinates that we are using for Walthourville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walthourville
- Walthourville is located in Liberty County
- Population from the 2020 Census: 4,065 people
- Jump to TripAdvisor's Tourism page for Walthourville <5>
- Pembroke
(14 miles [22.5 km] to the north)- Note: The GPS coordinates that we are using for Pembroke have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Bryan County
- Population from the 2020 Census: 2,683 people
- Jump to TripAdvisor's Tourism page for Pembroke <5>
- Donald
(14 miles [22.5 km] to the southwest)- Jump to our Gazetteer entry for Donald
- Donald is located in Long County
- Estimated population in 2019: 2,466 people
- Ludowici
(16 miles [25.7 km] to the south)- Note: The GPS coordinates that we are using for Ludowici have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ludowici
- Ludowici is located in Long County
- Population from the 2020 Census: 2,352 people
- Jump to TripAdvisor's Tourism page for Ludowici <5>
- Midway
(15 miles [24.1 km] to the southeast)- Jump to our Gazetteer entry for Midway
- Midway is located in Liberty County
- Population from the 2020 Census: 2,015 people
- Jump to TripAdvisor's Tourism page for Midway <5>
- Trinity
(5 miles [8 km] to the east) - Screven Fork
(14 miles [22.5 km] to the southeast)- Note: The GPS coordinates that we are using for Screven Fork have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Screven Fork
- Screven Fork is located in Liberty County
- Estimated population in 2019: 771 people
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Taylors Creek. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Taylors Creek.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Taylors Creek. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Taylors Creek.
We also have a detailed list of newspapers that have been published in the area around Taylors Creek. See our Newspapers Page for Taylors Creek.
Adding Taylors Creek to Our Gazetteer ...
We originally found mention of Taylors Creek in the GNIS. For more information, see the Referenced GNIS Codes section on our Miscellaneous Page.
From our notes, the earliest published mention we've found for Taylors Creek was in the book titled Business Atlas and Shippers' Guide (1895).
For more details, see References and Mentions for Taylors Creek.
Off-the-Road Links ...
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Taylors Creek, please let us know so that we can improve our accuracy. |
| <2> | If you're interested in how the shape of Georgia's counties, including Liberty, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | The elevation is an estimate for the area around Taylors Creek - it will be higher in some places and lower in others. |
| <5> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |