Nearby Communities in the 1890s

We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Redland in the Atlas, the following communities of the 1890's would have been found near the current location of Redland. The following communities are listed based on their distance, with the one closest to Redland listed first.

Jesup
(4 miles [6.4 km] to the southeast)
- Jump to our Gazetteer entry for Jesup
- Jesup is located in Wayne County
- Population from the 2020 Census: 9,847 people
- Jump to TripAdvisor's Tourism page for Jesup <2>
Odum
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for Odum
- Odum is located in Wayne County
- Population from the 2020 Census: 504 people
- Jump to TripAdvisor's Tourism page for Odum <2>
Doctortown
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Doctortown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Doctortown
- Doctortown is located in Wayne County
Brentwood
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Brentwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brentwood
- Brentwood is located in Wayne County
Ritch
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Ritch have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ritch
- Ritch is located in Wayne County
Screven
(11 miles [17.7 km] to the south)
- Jump to our Gazetteer entry for Screven
- Screven is located in Wayne County
- Population from the 2020 Census: 771 people
- Jump to TripAdvisor's Tourism page for Screven <2>
Gardi
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Gardi have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gardi
- Gardi is located in Wayne County
Surrency
(15 miles [24.1 km] to the west)
- Jump to our Gazetteer entry for Surrency
- Surrency is located in Appling County
- Population from the 2020 Census: 201 people
- Jump to TripAdvisor's Tourism page for Surrency <2>
Offerman
(18 miles [29 km] to the southwest)
- Jump to our Gazetteer entry for Offerman
- Offerman is located in Pierce County
- Population from the 2020 Census: 438 people
- Jump to TripAdvisor's Tourism page for Offerman <2>
Tison
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Tison have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tison
- Tison is located in Tattnall County
Patterson
(20 miles [32.2 km] to the southwest)
- Jump to our Gazetteer entry for Patterson
- Patterson is located in Pierce County
- Population from the 2020 Census: 758 people
- Jump to TripAdvisor's Tourism page for Patterson <2>
Hortense
(20 miles [32.2 km] to the south)
- Jump to our Gazetteer entry for Hortense
- Hortense is located in Brantley County
- Jump to TripAdvisor's Tourism page for Hortense <2>
Gum Branch
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Gum Branch have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gum Branch
- Gum Branch is located in Liberty County
- Population from the 2020 Census: 269 people
Glennville
(20 miles [32.2 km] to the north)
- Jump to our Gazetteer entry for Glennville
- Glennville is located in Tattnall County
- Population from the 2020 Census: 5,014 people
- Jump to TripAdvisor's Tourism page for Glennville <2>
Wheaton
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Wheaton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wheaton
- Wheaton is located in Appling County
Mount Pleasant
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Mount Pleasant have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Pleasant
- Mount Pleasant is located in Wayne County
Walthourville
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Walthourville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walthourville
- Walthourville is located in Liberty County
- Population from the 2020 Census: 4,065 people
- Jump to TripAdvisor's Tourism page for Walthourville <2>
Birdford ‑ Historic
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Birdford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Birdford
- Birdford is located in Tattnall County
Hinesville
(25 miles [40.2 km] to the northeast)
- Jump to our Gazetteer entry for Hinesville
- Hinesville is located in Liberty County
- Population from the 2020 Census: 34,085 people
- Jump to TripAdvisor's Tourism page for Hinesville <2>
Baxley
(25 miles [40.2 km] to the west)
- Jump to our Gazetteer entry for Baxley
- Baxley is located in Appling County
- Population from the 2020 Census: 4,652 people
- Jump to TripAdvisor's Tourism page for Baxley <2>
Altamaha
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Altamaha have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Altamaha
- Altamaha is located in Tattnall County
- Former name for Altamaha:
- Atamaha
Flemington
(27 miles [43.5 km] to the northeast)
- Jump to our Gazetteer entry for Flemington
- Flemington is located in Liberty County
- Population from the 2020 Census: 709 people
- Jump to TripAdvisor's Tourism page for Flemington <2>
Taylors Creek ‑ Historic
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Taylors Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Taylors Creek
- Taylors Creek is located in Liberty County
Blackshear
(28 miles [45.1 km] to the southwest)
- Jump to our Gazetteer entry for Blackshear
- Blackshear is located in Pierce County
- Population from the 2020 Census: 3,523 people
- Jump to TripAdvisor's Tourism page for Blackshear <2>
McIntosh
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for McIntosh have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McIntosh
- McIntosh is located in Liberty County
Prentiss
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Prentiss have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Prentiss
- Prentiss is located in Appling County

Off-the-Road Links ...

The official website for Wayne County: www.co.wayne.ga.us/

The official website for State of Georgia: https://georgia.gov/

Footnotes ...

<1>	We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Redland, please let us know so that we can improve our accuracy.
<2>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.