RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Georgia >> Screven County >> Red Bluff Landing >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
Georgia


The Commemorative Quarter for Georgia







Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Red Bluff Landing in the Atlas, the following communities of the 1890's would have been found near the current location of Red Bluff Landing. The following communities are listed based on their distance, with the one closest to Red Bluff Landing listed first.

  • Millhaven
    (Less than 2 miles to the north)
    • Jump to our Gazetteer entry for Millhaven
    • Millhaven is located in Screven County
  • Bascom
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Bascom have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bascom
    • Bascom is located in Screven County
  • Sardis
    (7 miles [11.3 km] to the northwest)
  • Girard
    (9 miles [14.5 km] to the north)
  • Sylvania
    (11 miles [17.7 km] to the south)
  • Zeigler
    (12 miles [19.3 km] to the south)
    • Jump to our Gazetteer entry for Zeigler
    • Zeigler is located in Screven County
  • Woodcliff
    (13 miles [20.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Woodcliff have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Woodcliff
    • Woodcliff is located in Screven County
  • Hattieville
    (13 miles [20.9 km] to the north)
    • Note: The GPS coordinates that we are using for Hattieville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hattieville
    • Hattieville is located in Barnwell County (SC)
  • Alexander
    (14 miles [22.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Alexander have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Alexander
    • Alexander is located in Burke County
  • Goloid
    (15 miles [24.1 km] to the south)
    • Note: The GPS coordinates that we are using for Goloid have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Goloid
    • Goloid is located in Screven County
  • Munnerlyn
    (17 miles [27.4 km] to the west)
    • Note: The GPS coordinates that we are using for Munnerlyn have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Munnerlyn
    • Munnerlyn is located in Burke County
  • Rocky Ford
    (20 miles [32.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for Rocky Ford have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rocky Ford
    • Rocky Ford is located in Screven County
    • Population from the 2020 Census: 137 people
    • Jump to TripAdvisor's Tourism page for Rocky Ford <3>
  • Captolo
    (20 miles [32.2 km] to the south)
    • Note: The GPS coordinates that we are using for Captolo have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Captolo
    • Captolo is located in Screven County
  • Dunbarton ‑ Historic
    (20 miles [32.2 km] to the north)
    • Note: The GPS coordinates that we are using for Dunbarton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dunbarton
    • Dunbarton is located in Barnwell County (SC)
  • Ogeechee ‑ Historic
    (21 miles [33.8 km] to the south)
    • Jump to our Gazetteer entry for Ogeechee
    • Ogeechee is located in Screven County
    • Former name for Ogeechee:
    • Oguchee
  • Peeples ‑ Historic
    (21 miles [33.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Peeples have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Peeples
    • Peeples is located in Hampton County (SC)
  • Allendale
    (21 miles [33.8 km] to the east)
    • Jump to our Gazetteer entry for Allendale
    • Allendale is located in Allendale County (SC)
    • Population from the 2020 Census: 2,829 people
    • Jump to TripAdvisor's Tourism page for Allendale <3>
  • Shell Bluff
    (21 miles [33.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Shell Bluff have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Shell Bluff
    • Shell Bluff is located in Burke County
  • Blitch
    (23 miles [37 km] to the south)
    • Note: The GPS coordinates that we are using for Blitch have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Blitch
    • Blitch is located in Bulloch County
  • Dover
    (23 miles [37 km] to the south)
  • Waynesboro
    (23 miles [37 km] to the northwest)
  • Cameron
    (24 miles [38.6 km] to the south)
    • Note: The GPS coordinates that we are using for Cameron have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cameron
    • Cameron is located in Screven County
    • Estimated population in 2019: 5,012 people
  • Gifford
    (24 miles [38.6 km] to the east)
    • Jump to our Gazetteer entry for Gifford
    • Gifford is located in Hampton County (SC)
    • Population from the 2020 Census: 261 people
    • Jump to TripAdvisor's Tourism page for Gifford <3>
  • Fairfax
    (24 miles [38.6 km] to the east)
    • Jump to our Gazetteer entry for Fairfax
    • Fairfax is located in Allendale County (SC)
    • Population from the 2020 Census: 1,622 people
    • Jump to TripAdvisor's Tourism page for Fairfax <3>
  • Luray
    (25 miles [40.2 km] to the east)
    • Jump to our Gazetteer entry for Luray
    • Luray is located in Hampton County (SC)
    • Population from the 2020 Census: 116 people
    • Jump to TripAdvisor's Tourism page for Luray <3>
  • Snelling
    (25 miles [40.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Snelling have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Snelling
    • Snelling is located in Barnwell County (SC)
    • Population from the 2020 Census: 259 people
  • Greenland ‑ Historic
    (25 miles [40.2 km] to the north)
    • Note: The GPS coordinates that we are using for Greenland have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Greenland
    • Greenland is located in Barnwell County (SC)

The official website for State of Georgia: https://georgia.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Red Bluff Landing, please let us know so that we can improve our accuracy.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024